Vise Grip Locking

Vise Grip Locking

Hand Tool Safety

While hand tools offer a host of benefits, their improper usage poses a high risk of injury. If mishandled, they can hurt not only the user but also those working around him. In addition, misuse can damage hand tools beyond repair, leaving them with no utility for the future. The resultant accidents would result in downtime, adversely affecting the task at hand.

To ensure security of life and equipment, it is very important to use hand tools correctly. Here are some safety tips:

Correct Usage
Every hand tool is designed to perform specific tasks. For instance, cutting pliersare designed to cut wires without much effort. Using one to drive a nail into a wall may not only bend the cutting plier out of shape but also keep the nail loose and unsecured.

Or, in another case, locking pliers are popular toolbox contents as they offer an exceptionally firm grip over an object. In fact, until the user applies pressure to release an object, locking pliers will maintain a vise-like grip on it. However, they would simply not work as screwdrivers.

Then again, certain jobs require hand tools to be insulated to be safe for use. Indifference towards this need may boomerang on the user badly.

Thus, using a hand tool to serve its intended purpose will ensure optimum performance with no damage.

Quality
The user's toolbox must be equipped with quality hand tools, designed to minimize effort and maximize safety.

Screws, nails and other hard objects would require high-quality cutting pliers. Also, cutting pliers offering higher leverage would not only make the job easier but also offer a stronger, safer grip. Good locking pliers offering a contoured area make for better grip, too. Well insulated tools also reduce chances of injury greatly.

Good Maintenance
Tools must be inspected frequently to be able to serve the user well.

If insulated hand tools are kept dry and clean, their safety is a given. This applies in the case of well lubricated cutting pliers, too. While cutting, if these pliers are used at the right angle, their knives will remain sharp and damage-free. Also, in the case of locking pliers, properly adjusting their center screw will make them highly effective in loosening hard bolts.

Safety Norms
An alarming fact is that most accidents while on the job occur because safety procedures have been ignored. For instance, if appropriate gear is not worn to protect the eyes while working on metal or glass, shards can fly into them and cause serious, even lifelong, injury. Keeping oneself updated about the latest in workplace safety norms is a must for any hand tool user.

While purchasing hand tools, the user must always remember that superior quality and adherence to safety norms translates into an investment made towards better, injury-free performance.

About the Author

Matco Tools is a manufacturer of finest quality service carts that can be used in Tool Storage. We offer top automotive franchise opportunities with a wide range of events & programs to drive your business. Start your own tool business franchise now!

10Pc Vise-Grip? Locking Tools In Tray $126.95 ? Durable tray ? Fits in a standard mechanic tool chest ? Includes: Straight Jaw Locking Pliers (No. 10R), Locking C-Clamps with Regular Tips (No. 11R), Curved Jaw Locking Pliers with Wire Cutter (No. 10WR), Long Nose Locking Pliers with Wire Cutter (No. 9LN), Straight Jaw Locking Pliers (No. 7R), Curved Jaw Locking Pliers with Wire Cutter (No. 7WR), Locking Wrench (No. 7LW), Locking C-Clamps with Regular Tips (No. 6R), Long Nose Locking Pliers with Wire Cutter (No. 6LN), Curved Jaw Locking Pliers with Wire Cutter (No. 5WR)By Vise Grip.

Vise Grip 6LN Fast Release Long Nose Locking Pliers. Each $16.63 Manufacturer: Vise Grip. Each. Features Benefits: Introducing the new VISE-GRIP Fast Release locking tool. It offers the strength and durability of The Original, with the performance advantage of a release that is 2X easier to open. It unlocks from any

Irwin Irwin 4 in Vise Grip Pliers 4LN-3 $11.59 4? vise grip pliers With wire cutter 4? long, 1/4? jaw thickness, 1-3/4? jaw adjustment Brand #: Irwin 4LN-3 UPC: 038548016047 Keywords: plier locking vise grip long nose

Irwin Irwin 6 in Vise Grip Pliers 6LN-3 $12.14 6? vise grip pliers With wire cutter 6? long, 1/4? jaw thickness, 2-1/2? jaw adjustment Brand #: Irwin 6LN-3 UPC: 038548014043 Keywords: plier locking vise grip long nose

Irwin Irwin 9 in Vise Grip Pliers 9LN-3 $14.04 9? vise grip pliers With wire cutter 9? long, 13/32? jaw thickness, 3? jaw adjustment Brand #: Irwin 9LN-3 UPC: 038548015040 Keywords: plier locking vise grip long nose

Vise Grip 7" Straight Jaw Locking Pliers. Each $11.39 Manufacturer: Vise Grip. Each. Size: 7" Size - metric: 175mm Jaw adjustment: 0 - 1-1/8" Jaw adjustment - metric: 0 - 29mm Package: Boxed Customers also search for: Discount 7" Straight Jaw Locking Pliers, Buy 7" Straight Jaw Locking Pliers, Wholesale 7" S

Vise Grip 4" Long Nose Locking Pliers. Each $13.98 Manufacturer: Vise Grip. Each. Long nose model: 4LN Size: 4" Size - metric: 100mm Jaw adjustment: 0 - 1-5/8" Jaw adjustment - metric: 0 - 41mm Package: Boxed Customers also search for: Discount 4" Long Nose Locking Pliers, Buy 4" Long Nose Locking Pliers,

Vise Grip 9" Locking Auto Clamp. Each $21.49 Manufacturer: Vise Grip. Each. Size - metric: 225mm Jaw opening: 3/8" Jaw opening - metric: 10mm Throat depth: 7/32" Throat depth - metric: 6mm Package: Boxed Customers also search for: Discount 9" Locking Auto Clamp, Buy 9" Locking Auto Clamp, Wholesale

Vise Grip VGP538KB 5Piece Vise Grip Set $75.27 Features and Benefits:Contains (1) each 10R 10 Straight jaw locking pliers. Allows for max contact on flat square or hex work. Very popular in welding and other metal work. Use for safer grinding or as a portable vise 10CR 10 Curved jaw locking pliers. Involute jaw curve permits user to put tremendous pressure on four points of any style nut or bolt head 7WR 7 Curved jaw locking pliers w/ wire cutters. Convenient wire cutter cuts up to a 1/4 bolt. Involute jaw curve permits user to put tremendous pressure on four points of any style nut or bolt head. 6LN 6 Long nose locking pliers. Convenient wire cutter cuts up to a 1/4 bolt. Long straight nose allows for use in narrow spaces not reachable by curved or straight jaws. Use to clamp or tighten bolts or to extract items in hardtoreach places. 5WR 5 Locking pliers. Curved jaw locking pliers w/ wire cutters. Convenient wire cutter cuts up to a 1/4 bolt. Involute jaw curve permits user to put tremendous pressure on four points of any style nut or bolt head.

Vise Grip 6R Fast Release Locking Clamp w/Regular Tips. Each $14.93 Manufacturer: Vise Grip. Each. Features Benefits: Introducing the new VISE-GRIP Fast Release locking tool. It offers the strength and durability of The Original, with the performance advantage of a release that is 2X easier to open. It unlocks from any

Vise Grip 10WR Fast Release Curved Jaw Locking Pliers w/Wire Cutter. Each $11.05 Manufacturer: Vise Grip. Each. Features Benefits: Introducing the new VISE-GRIP Fast Release locking tool. It offers the strength and durability of The Original, with the performance advantage of a release that is 2X easier to open. It unlocks from any

Vise Grip 10R Vise Grip Straight Jaw 10 Inch 250 mm Locking Plier $26.66 Vise Grip VGP10R 10 in. Adjustable Straight Jaw Locking Pliers 10R Locking Pliers Straight Jaw 10 inch Straight jaw model: 10R Size: 10 Size metric: 250 mm Jaw adjustment: 0 15/8 Jaw adjustment metric: 0 41 mm Package: Boxed. 10 with jaw adjustment up to 15/8 . Locks instantly releases quickly and adjusts to plier action. Straight jaws allow for maximum contact on flat square or hex work. Excellent for welding and other metal work for safer grinding or as a portable vise.

Vise Grip 10" Adjustable Straight Jaw Locking Pliers. Each $15.23 Manufacturer: Vise Grip. Each. Straight jaw model: 10R Size: 10" Size - metric: 250 mm Jaw adjustment: 0 - 1-5/8" Jaw adjustment - metric: 0 - 41 mm Package: Boxed Customers also search for: Discount 10" Adjustable Straight Jaw Locking Pliers, Buy 10" Adj

Vise Grip 7" Locking Pinch Off Tool. Each $18.45 Manufacturer: Vise Grip. Each. Pinches off and locks on tubing Leaves both hands free to do other work Size: 7î / 175mm Jaw thickness: 1/4î / 6mm Throat depth: 1î / 25mm Boxed stock: 29 Customers also search for: Discount 7" Locking Pinch Off Tool, Buy 7

Vise Grip 10 Piece Locking Pliers Set. Each $115.24 Manufacturer: Vise Grip. Each. Features Benefits: Includes one of Each: VGP11R-11" C-clamp VGP10WR-10" Curved jaw VGP10R-10" Straight jaw VGP9LN-9" Long nose VGP7WR-7" Curved jaw VGP7R-7" Straight jaw VGP7LW-7" Locking wrench VGP6R-6" Straight jaw VGP6L

Irwin Vise-Grip® - Locking Sheet Metal Clamps $21.9 Tough and efficient sheet metal clamps. Irwin Vise-Grip® - 8" VISE GRIP LOCKING SH MTL CLAMPS Hand tools that eliminate hand gripping by locking to work Makes forming, bending and crimping jobs trouble-free Manufactured with heat-treated, high-grade alloy steel to give these locking pliers and grips extreme toughness and durability Same alloy steel used with other pliers & cutters made by Irwin Vise-Grip Adjust pressure and fit work easily by turning Adjustment remains for repetitive use Comes with guarded release trigger for protection against accidental release and for speedy unlocking capabilities

Irwin Irwin 10 in Vise Grip Pliers 10R-3 $11.54 10? vise grip pliers Straight jaws, without wire cutter 1 per box 10? long, 5/8? jaw thickness, 1-1/4? jaw adjustment Brand #: Irwin 10R-3 UPC: 038548001043 Keywords: plier locking straight jaw vise grip

Irwin Irwin 10 in Vise Grip Pliers 10WR-3 $11.54 10? vise grip pliers Curved jaws, with wire cutter 1 per box 10? long, 3/8? jaw thickness, 1-7/8? jaw adjustment Brand #: Irwin 10WR-3 UPC: 038548005041 Keywords: locking plier curved jaw vise grip

Irwin Irwin 4 in Vise Grip Pliers 4WR-3 $10.23 4? vise grip pliers Curved jaws, with wire cutter 1 per box 4? long, 1/4? jaw thickness, 15/16? jaw adjustment Brand #: Irwin 4WR-3 UPC: 038548010045 Keywords: locking plier curved jaw vise grip

Irwin Irwin 5 in Vise Grip Pliers 5WR-3 $11 5? vise grip pliers Curved jaws, with wire cutter 1 per box 5? long, 1/4? jaw thickness, 1-1/4? jaw adjustment Brand #: Irwin 5WR-3 UPC: 038548009049 Keywords: locking plier curved jaw vise grip

Irwin Irwin 7 in Vise Grip Pliers 7CR-3 $11.76 7? vise grip pliers Curved jaws, without wire cutter 1 per box 7? long, 1/4? jaw thickness, 1-5/8? jaw adjustment Brand #: Irwin 7CR-3 UPC: 038548990712 Keywords: vise grip plier curved jaw locking

Irwin Irwin 7 in Vise Grip Pliers 7R-3 $11.21 7? vise grip pliers Straight jaws, without wire cutter 1 per box 7? long, 7/16? jaw thickness, 1-1/8? jaw adjustment Brand #: Irwin 7R-3 UPC: 038548003047 Keywords: plier locking straight jaw vise grip

Irwin Irwin 7 in Vise Grip Pliers 7WR-3 $11.35 7? vise grip pliers Curved jaws, with wire cutter 1 per box 7? long, 1/4? jaw thickness, 1-5/8? jaw adjustment Brand #: Irwin 7WR-3 UPC: 038548007045 Keywords: locking plier curved jaw vise grip

Vise Grip VGP641KB 6Piece Locking Pliers Set $95.21 Ideal for tightening clamping twisting and turning. Constructed of highgrade heat treated alloy steel for maximum toughness and durability. Classic Trigger Release designed to provide maximum locking force. Hardened teeth are designed to grip from any angle. Set includes:. VGP10WR 10 Curved jaw. VGP9LN 9 Long nose. VGP7WR 7 Curved jaw. VGP6LN 6 Long nose. VGP5WR 5 Curved jaw. VGP4LN 4 Long nose. Length: 10.25in. Width: 5 . Height: 4

Irwin Vise-Grip® - Straight Jaw Locking Pliers $14.9 Strongest and toughest straight-jaw locking pliers. Irwin Vise-Grip® - STRAIGHT JAW VISE GRIP LOCKING PLIERS CARDED Locking pliers with straight jaws that gives you superior contact on square, flat, or hex work Great for clamping, tightening, twisting and turning To adjust pressure and fit work, simply turn screw Can stay adjusted for repeated use Unlock quickly and protect yourself from accidental release with the use of the guarded release trigger Hand tools made with heat-treated, high-grade alloy steel for utmost durability and toughness Hardened teeth on Irwin pliers & cutters are made to securely grip from any angle

8 Inch Locking Sheet Metal Clamp Hand Tool Vise Grip $18.49 Description:Versatile Vise Grip Locking Sheet Metal makes bending, forming, and crimping jobs easier.Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use.This Locking Sheet Metal Clamp is constructed of high-grade heat-treated steel for maximum toughness and durability.Guarded release trigger quickly unlocks and protects from accidental release.This Hand Tool is measures 8 inches long, jaw width of 3 1/16 inches and throat depth of 1-3/4 inches.Weight: 437gPackage Included:1 x 8 Inch Locking Sheet Metal Tool

Vise Grip VG6LN 6Locking Pliers $26.97 Pliers / Wrench 6 inch Long Nose Locking. Long nose model: 6LN. Size: 6 . Size metric: 150mm. Jaw adjustment: 0 21/4 . Jaw adjustment metric: 0 57mm. Package: Boxed.

Irwin Vise-Grip® - Locking Chain Clamps $32.9 Unique locking chain clamps. Irwin Vise-Grip® - 9" VISE-GRIP LOCKING CHAIN Chain locking pliers can hold and lock around any size or shape object Great for use with oddly shaped objects Adjust pressure and fit work on these hand tools with the turn of a screw Can stay adjusted for repeated use All pliers & cutters by Irwin manufactured with heat-treated, high-grade alloy steel for maximum durability and toughness Comes with guarded release trigger for swift unlocking capabilities Same feature also protects users from accidental release

Vise Grip VGP1078KB 10Piece Locking Pliers Set $165.74 Features and Benefits:Includes one of Each: VGP11R11 Cclamp VGP10WR10 Curved jaw VGP10R10 Straight jaw VGP9LN9 Long nose VGP7WR7 Curved jaw VGP7R7 Straight jaw VGP7LW7 Locking wrench VGP6R6 Straight jaw VGP6LN6 Long Nose VGP5WR5 Curved jaw

Vise Grip VGP6R 6 Inch Locking CClamp $27.91 6R CClamp Locking Pliers / Wrench 6 inch Features and Benefits: Regular tips model: 6R Size: 6 Size metric: 150mm Jaw adjustment: 0 2 Jaw adjustment metric: 0 50mm Throat depth: 11/2 Throat depth metric: 38mm Package: Carded

Vise Grip 6 Piece Locking Pliers Set. Each $67.28 Manufacturer: Vise Grip. Each. Features Benefits: Includes One Each Of: VGP10WR - 10" Curved jaw VGP9LN - 9" Long nose VGP7WR - 7" Curved jaw VGP6LN - 6" Long nose VGP5WR - 5" Curved jaw VGP4LN - 4" Long nose Customers also search for: Discount 6 Piece

Vise Grip 2 Piece 10WR and 6LN Fast Release Set. Each $27.48 Manufacturer: Vise Grip. Each. Features Benefits: Introducing the new VISE-GRIP Fast Release locking tool. It offers the strength and durability of The Original, with the performance advantage of a release that is 2X easier to open. It unlocks from any

Irwin Vise-Grip® - Locking Welding Clamps $24.9 High-grade alloy steel welding clamps. Irwin Vise-Grip® - 9" LOCKING WELDING CLAMP V.G. Hand tools that come with U-shaped jaws Provides improved visibility and allows for more working space Grips work in correct alignment For holding odd shapes in place or for welding Manufactured with heat-treated, high-grade alloy steel to give these locking pliers and grips extreme toughness and durability Same alloy steel used with other pliers & cutters made by Irwin Vise-Grip Adjust pressure and fit work easily by turning Adjustment remains for repetitive use Comes with guarded release trigger for protection against accidental release and for speedy unlocking capabilities

Vise Grip VGP24R 24 Inch Locking CClamp $51.34 Wide opening jaws provide greater versatility in clamping a variety of shapes. Turn screw to adjust pressure and fit work; stays adjusted for repetitive use. Constructed of high grade heat treated steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. Jaw capacity: 121/2 . 24 Locking CClamp with Regular Tip.Lifetime warranty does not cover abuse.

Vise Grip 3 Piece Locking Pliers Set (10CR, 7CR and 5CR). Each $34.76 Manufacturer: Vise Grip. Each. Features and Benefits: Ideal for tightening, clamping, twisting and turning Constructed of high grade heat treated alloy steel for maximum toughness and durability Classic Trigger Release designed to provide maximum locking

Irwin Irwin 12 in Vise Grip Pliers 12LC-3 $17.91 12? vise grip pliers Heavy-duty curved jaw grips around work of all shapes Locks on, will not slip Works as a pipe wrench, adjustable wrench, clamp or tongue-and-groove pliers Ideal for use by plumbers, mechanics, and welders High-grade steel construction 12? long, 3-1/8? jaw opening Brand #: Irwin 12LC-3 UPC: 038548012018 Keywords: vise grip plier locking large jaw