Vag Com Cable
Vag Com Cable
 |
US $2.49
|
|
VAG-COM 908 Diagnostic Cable Tool $70 Manufacturer's description:VAG com 908 Supports Measuring Values, Output Tests, and Adaptations on control modules using the new UDS/ODX/ASAM protocol.VAG 908 Adds new UDS addresses and updated ODX data for 2010 models.VAG com 908 Includes support for TP1.6 protocol which is required for the 6J Ibiza and speeds up access on many modules in other models.The Select Control Module screen now shows Installed Modules rather than Common Modules if the car being worked on is new enough to have a proper CAN Gateway.Modified SRI Screen to show more info and force user to select a job before proceeding.VAG 908 Adds drop-box function selection in Basic Settings and Adaptation.VAG 908 Reads Mileage stored in many EDC16 ECUs.New CODES file, now with over 13, 000 fault code and measuring value texts.New USB drivers for enhanced PC compatibility and stability.New firmware for HEX interfaces required for compatibility with 6J IbizaUpdated Label files; better documentation for new and existing models.Compared with the 812, VAG 908 has its biggest advantage. It lies in that VAG 908 can match Airbags under the protocol of UDS while the 812 can only read code, erase code and do coding, and it cannot match airbags. Pls check the comparence in the following pictures. The icons of 908 are activated while the ones of 812 are not.In one word, if you want to match Airbags of new models, VAG 908 is your only choice. The new models that the VW launches now or in the future, such as New Bora and Lavida, will all use UDS protocol. Besides, the VAS5054 in the market nearly doesnt support UDS protocol. |
|
|
VAG-COM V409.1 USB Vehicle OBD/OBD2 Cable with Software CD $24.2 *May ships in black color if the blue one is unavailable*- This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol- Can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus- Terminal K = Bus of communication- Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit)- Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW- This K/L Diagnostic interface And cables work on ISO/KWP (Key Word Protocol) launched after 1996only- Supported also ISO9141 protocol- Comes with software CD- Cable length: 130cm- It works with most Volkswagen and Audi models sold worldwide from 1994 onwards. It also workswith most SEAT and Skodas sold outside of N. America. If your VW or Audi has a 16pin OBD II styleData Link Connector then VAG-COM will work |
|
|
VAG-COM HEX USB CAN Vehicle Bus Cable with Software CD $32.1 Model: HEX USB CAN VAG-COM for 805.1Compatible with the newest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7,etc.Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU.Built-In VAG-Saver functionality -instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or VbattUSB connector plugs into most modern laptops!Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -no VAS-6017 required -no manual switches!Fully backwards compatible with older cars using a single K-line or K plus LBi-Color (red/green) status/activity LEDFunction all of, support the car type to 2007Operating system: Windows XPDiagnostics Type including:- All Golf-5 platform cars (A5 platform) including:- 2003+ VW Touran (1T chassis)- 2004+ VW Golf (1K chassis)- 2004+ VW Caddy (2K chassis)- 2004+ Audi A3 (8P chassis)- 2004+ Seat Altea (5P chassis)- 2004+ Skoda Octavia (1Z chassis)- 2005+ Seat Toledo (5P chassis)- 2005+ Golf Plus (5M chassis)- 2005+ Seat Leon (1P chassis)- 2005.5+ Jetta (1K chassis)- 2006+ Eos (1F chassis)- 2003+ Audi A8 and A8L (D3 platform, 4E chassis)- 2005+ Audi A6 (C6 platform, 4F chassis)- 2005+ Audi A4 ("B7" platform) (some control modules)- 2005.5+ VW Passat (B6 Platform, 3C chassis)- 2006+ Audi Q7 (4L chassis)- 2007+ Audi R8 (42 chassis)- 2007+ Audi TT (8J chassis)- 2007+ VW Touareg (7L6 chassis) ("facelift", built after Nov. 30 2006) SpecificationsDimensions: 3.07 in x 1.81 in x 0.91 inWeight: 4.59 oz |
|
|
com por cable KKL VAG-COM para VW / Audi 409,1 $10.62 Dimensiones (cm): 8.7 x 4 x 2 Peso (kg): 0.15 |
|
|
COM Cable KKL VAG-COM for VW / Audi 409.1 $12.99 Dimensions (cm): 8.7 x 4 x 2 Weight (kg): 0.15 |
|
|
Car Diagnostics VAG-COM for 409.1 Scanner $16.89 Highlights This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol.Specifications Reference Data1.This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus. 2. Terminal K = Bus of communication 3. Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit) 4. Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW 5. This K/L Diagnostic interface amp; cables work on ISO/KWP (Key Word Protocol) launched after 1996 only. 6. Supported also ISO9141 protocol 7.The Cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces. |
|
|
OBD2 OBD II Diagnostic USB Cable KKL409.1 VAG-COM 409 $12.99 Description This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used. For example by: --Volkswagen --Skoda --Audi --Seat Reference Data 1.This cable can not work if your car uses a protocol ssystem like VPW,PWM or Can-bus. 2. Bus of communication 3.Terminal L= Ignition for waking up car computing system (ECU: Engine Control Unit) 4.Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW 5.This K/L Diaqnostic interface amp; cables work on ISO/KWP (Kev Word Protocol) Iaunched after 1996 only 6.Supported also ISO9141 protocol 7.The cables may work with some versions of the Carsoft, but carsoft used a lot of different intercaces during the different versions and also had some custom interfaces. 8.Product running as virtual comport, like many products it usees a USB to Rs232 converter chip .But under special circumstances this can give some problems regarding time especially on the handshake lines. 9.Read amp; erase error code, log data e. g. speed, gasoline, consume engine-rotating(RPM: Rotation Per Minutes). |
|
|
Cable USB KKL VAG-COM para VW / Audi 409,1 $10.62 Dimensiones (cm): 8.7 x 4 x 2 Peso (kg): 0.12 |
|
|
ELM327 OBD 2 interfaz de diagnóstico VAG-COM cable $20.43 Dimensiones (cm): 7.5 x 7 x 2 Peso (kg): 0.31 |
|
|
ELM327 OBD 2 Diagnostic Interface VAG-COM Cable $24.99 Dimensions (cm): 7.5 x 7 x 2 Weight (kg): 0.31 |
|
|
USB Cable KKL VAG-COM for VW / Audi 409.1 $12.99 Dimensions (cm): 8.7 x 4 x 2 Weight (kg): 0.12 |
|
|
USB KKL VAG-COM 409.1 Compatible Interface for VW/AUDI/SEAT/SKODA (120CM-Length) $13 - Model: V580- Designed for VAG vehicles such as VW, Audi, Seat, Skoda with a 16-pin OBDII socket that usingISO9141-2 or ISO14230-4 (KWP2000) Protocol- When paired with the right software, can turn your laptop to a powerful portable vehiclediagnostic device- Database of more than 7500 fault codes- Display critical timing information on TDI engines- Cable length: 120cm- Comes with software CD- Note: Will not work on CAN-BUS protocol |
|
|
OBDII KKL VAG-COM 409.1 Compatible Interface for VW/AUDI/SEAT/SKODA (110CM-Length) $11.9 - Model: V680- Designed for VAG vehicles such as VW, Audi, Seat, Skoda with a 16-pin OBDII socket that usingISO9141-2 or ISO14230-4 (KWP2000) Protocol- Database of more than 7500 fault codes- Uses the new 7-Digit PIN/SKC codes to match new keys in all immobilizer equipped models- Allows you to view, log and graph of up to 3 groups of Measuring Blocks at once- Cable length: 110cm- Note: Will not work on CAN-BUS Protocol |
|
|
VCDS VAG 10.6 Vag Com 10.6 $24.4 Beta versions contain new features and functions that have not yet been as fully tested as have Release versions.If you use a Beta, you may find bugs or problems and you are expected to report them to Ross-Tech so that we can fix them before making a new Release.Please be sure that you have also installed the latest version on your computer as well so that you can revert back to using that if you encounter problems with the Beta.Beta10.6 includes the following new features and improvements: Basic Settings for latest Control Modules using UDS/ ODX/ ASAM protocols.As is the case for other functions under UDS, there are no longer any channel or group numbers.Instead, the Basic Setting to be performed must be selected from a drop-down listOn UDS control modules which offer " Instructions" , VCDS will automatically display them.In addition, UDS Measuring Values can be displayed simultaneously.Added ability to view Measuring Values during UDS Output Tests.This can be handy to verify that certain outputs are functioning as intendedImproved Readiness screen, now shows name of script in title bar and under [ Set Readiness] button, or gives a reason why [ Set Readiness] is disabled when that is the caseSupport for new and revised models such as the face-lifted 2010 T5 van.New, revised and expanded ODX/ ASAM data set, supporting Basic Settings function and additional new control modules under UDS.Release Notes: Works only with Intelligent Interfaces ( HEX, KEY and Micro-CAN) .Works on Windows XP.Default installation location is C: Ross-Tech VCDS-Beta .If allowed to install to its default location, it will not overwrite or interfere with the use of Release 908.Package including:VAG 10.6 cableCD software driver |
|
|
Correction tool OBD2 EEPROM IMMO PIN USB VAG Tacho 2.5 $23.99 Primary Function: USB VAG-COM interface cable and scanner for VW AudiOBDII Plug: J1962 16-Pin Male (to Car)Operating Software Compatibility: Windows 98SE / ME / 2000 / XP and Vista (32 bit version only)Supports terminal (K) bus communicationTerminal (L) ignition for waking up car computing system (ECU) engine control unitSupports 3 different protocols with same OBD2 connector including ISO/KWP, VPW, PMWDiagnostics Vehicle Types Including : - 2003 VW Touran (1T chassis) - 2004 VW Golf (1K chassis) - 2004 VW Caddy (2K chassis) - 2004 Audi A3 (8P chassis) - 2004 Seat Altea (5P chassis) - 2004 Skoda Octavia (1Z chassis) - 2005 Seat Toledo (5P chassis) - 2005 Golf Plus (5M chassis) - All Golf-5 platform cars (A5 platform) - 2005 Seat Leon (1P chassis) - 2005 Jetta (1K chassis) - 2006 Eos (1F chassis) - 2003 Audi A8 and A8L (D3 platform, 4E chassis) - 2005 Audi A6 (C6 platform, 4F chassis) - 2005 Audi A4 (B7 platform) (some control modules) - 2005 VW Passat (B6 Platform, 3C chassis) - 2006 Audi Q7 (4L chassis) - 2007 Audi R8 (42 chassis) - 2007 Audi TT (8J chassis)Dimension: L:154 (CM)Manufacturer Ref: DBD7A45C4A8AProduct NotesAlso supports ISO9141 protocolNo DC or alternate power supply needed, just connect to your car and computerThis model is fully compatible with most VW, Audi, Seat and Skoda models through 2007,including models using a direct CAN connection for diagnosticsAllows you to view, log, and graph 3 groups of measuring blocks at onceView critical timing information on TDI engines in the graphic formPackage ContentsModel: CVFG-A09 USB VAG-COM interface cableUser CD Manual amp; Software: EnglishFAQ - Frequently Asked QuestionsCan I use this CVFG-A09 car diagnostics USB To VAG-COM cable model on my Audi TDI?Yes it should work OK. The best way check if your car is compliant is to check the car user manual or contact your local car dealer.Do I need to have my car running while performing diagnostics?Just the ignition, but for some tests you might require the engine to be running.Can I update the 704 VAG-COM software on the internet?This cable package is only available for use with the software version of 704.1 which is included. You should never try to update it.Can I use this cable with other software such as _________ that my brother recommended?The CVFG-A09 model VAG-COM diagnostics cable comes with software. If may also work with other software, but we have not tested it with any other software and can not guarantee performance or compatibility with anything other than what is provided. |
|
|
106 vag $27.78 características Vag 106 106,0 versões beta conter novos recursos e funções que ainda não tenham sido tão completamente testado assim como versões de lançamento. se você usar uma versão beta, você pode encontrar bugs ou problemas e que se espera para relatá-los a ross-tech para que possamos corrigi-los antes de fazer um novo lançamento. por favor não se esqueça que você também instalada a última versão em seu computador, bem assim que você pode voltar a usar que se você encontrar problemas com o beta. funções: suporta configurações básicas (as configurações), utilizando os módulos de protocolo, os UDs / ODX / ASAM fazer melhorias para tratar uds ODX e modelos que serão exibidos em 2011 apoiar o novo endereço para os mais recentes modelos de carros prontidão melhorias tela com informações adicionais Suporte completo para sistemas operacionais de 64 bits somos mais de 14.000 da versão actual, textos adicionais nos campos de medição de valores rótulos actualizado e melhorado documentação desses campos para novos modelos de carros inclui todas as melhorias da beta 912, 10,3 e 10,4 novas funcionalidades e melhorias: configurações básicas para módulos mais recentes de controle usando o UDS / ODX / ASAM protocolos. como é o caso para outras funções sob UDS, há um número não mais qualquer canal ou grupo. Além disso, os valores de UDs de medição podem ser exibidas simultaneamente Adicionado a capacidade de visualizar os valores de medição durante testes de saída UDS. Isto pode ser útil para verificar se certas saídas estão funcionando conforme o esperado tela de prontidão melhor, agora mostra o nome do script na barra de título e sob o botão, ou dá uma razão para [definir prontidão] é desativado quando for o caso: suporte para os modelos novos e revisados, como o cara levantou 2010 t5 van. novo, revisto e ampliado ODX / ASAM conjunto de dados, suportando a função de definições básicas e adicionais módulos de controle em novas uds. |
|
|
OBD2 OBD II kkl409.1 cable usb de diagnóstico VAG-COM 409 (szc584) $10.62 descripción este diagnóstico se puede usar cable de ISO9141 y kwp2000 como protocolo de transmisión utilizado. por ejemplo: - volkswagen - Skoda - Audi - asiento datos de referencia 1.El cable no puede funcionar si su coche utiliza un protocolo ssystem como VPW, PWM o CAN-Bus. 2. autobús de la comunicación 3.terminal l = encendido para despertar coche sistema informático (Ecu: la unidad de control del motor) 4.existed 3 diferentes protocolos con el mismo conector OBD2 incl. iso / kWp, VPW, PMW 5.this k / l diaqnostic interfaz y los cables de trabajo sobre la norma ISO / kWp (keV palabra protocolo) iaunched sólo después de 1996 6.supported también ISO9141 protocolo 7.El cables pueden trabajar con algunas versiones de la carsoft, pero carsoft utilizado un montón de diferentes intercaces durante las diferentes versiones y también tiene algunas interfaces. 8.product ejecutando como com virtual, al igual que muchos productos que usees un convertidor de USB a rs232 chip. Pero en circunstancias especiales puede dar algunos problemas en cuanto a tiempo, especialmente en la líneas de Handshake. 9.read y borrar el código de error, por ejemplo, datos del registro de la velocidad, la gasolina, el consumo del motor de rotación (rpm: rotación por minuto). |
|
|
KKL VAG-COM for 409.1 USB OBD2 Cable Car Diagnostic Scan Tool $12.99 SpecificationsType: Other Port: Other Weight (kg): 0.104 |
|
|
Car Diagnostics VAG 704.1 Scanner $44.79 Highlights Working with a computer, this item performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more. This item is fully compatible with almost all VW/AUDI/SEAT/SKODA vehicles, including KKL and CAN-BUS.Specifications OBDII Plug: J1962 16-Pin Male (to Car) Connection Port: USB port Length: 1.8 meters Weight: About 150g Color: BlackPowered from car battery over OBD2 connectorPackage Contents1pc vag com 704.1 cable1pc CD Drive |
|
|
herramienta de corrección de EEPROM Immo pines OBD2 VAG Tacho USB 2.5 (szc650) $19.61 función principal: VAG cable de interfaz USB-COM y escáner para Audi VW OBDII Plug: J1962 16-pin macho (para coche) la compatibilidad del software de operación: Windows 98SE / ME / 2000 / XP y Vista (32 bits Versión) apoya terminal (k) del bus de comunicación terminal (l) de encendido para despertar el sistema de computación de coches (ECU), unidad de control del motor admite los protocolos 3 diferentes con mismo conector OBD2 incluyendo la norma ISO / KWP, VPW, PMW diagnóstico de los tipos de vehículos, incluidas : - 2003 VW Touran (1T chasis) - 2004 VW Golf (1K chasis) - 2004 VW Caddy (2K chasis) - 2004 Audi A3 (8P chasis) - 2004 SEAT Altea (chasis 5P) - 2004 Skoda Octavia (1Z chasis) - 2005 SEAT Toledo (5P chasis) - 2005 Golf Plus (chasis 5M) - Todos los Golf-5 coches plataforma (plataforma A5) - 2005 seat leon (1p chasis) - 2005 Jetta (1K chasis) - 2006 Eos (1F chasis) - 2003 Audi A8 y A8L (D3 plataforma, 4E chasis) - 2005 Audi A6 (C6 plataforma, 4F chasis) - 2005 Audi A4 (B7 plataforma) (algunos módulos de control) - 2005 VW Passat (B6 Plataforma, 3C chasis) - 2006 Audi Q7 (4L chasis) - 2007 Audi R8 (42 chasis) - 2007 Audi TT (chasis 8J) dimensión: L: 154 (cm) Ref. fabricante: dbd7a45c4a8a notas de producto también es compatible con el protocolo ISO9141 sin fuente de alimentación DC o suplentes necesarios, sólo tienes que conectar a tu coche y el ordenador de este modelo es totalmente compatible con la mayoría de VW, Audi, Seat y Skoda modelos hasta el 2007, incluyendo modelos usando una conexión directa para el diagnóstico puede le permite ver, registrar, y el gráfico 3 grupos de la medición de los bloques a la vez Ver información momento crítico en los motores TDI en la forma gráfica el contenido del paquete Modelo: cvfg-A09 VAG cable de interfaz USB-COM CD manual de usuario y software: Inglés FAQ - Preguntas más frecuentes ¿Puedo utilizar este cvfg-A09 diagnóstico coche USB para vag-com modelo de cable en mi Audi TDI? Sí, debería funcionar bien. la mejor manera de comprobar si su vehículo es compatible es comprobar los usuarios del coche manual o póngase en contacto con su distribuidor local de automóviles. Qué necesito para tener mi coche en marcha mientras se realiza el diagnóstico? sólo el contacto, pero para algunas pruebas que se le puede exigir que el motor se esté ejecutando. puedo actualizar los 704 vag-com de software en Internet? de este paquete de cable sólo está disponible para su uso con la versión del software de 704,1 que se incluye. Usted nunca debe tratar de actualizarlo. ¿Puedo usar este cable con otro software como _________ que mi hermano se recomienda? la cvfg VAG-A09 modelo de diagnóstico a la compañía de cable viene con el software. si también puede funcionar con otro software, pero no lo he probado con otro software y no puede garantizar el rendimiento o la compatibilidad con cualquier otra cosa de lo previsto. |
|
|
si-redefinir vag obd2 $13.89 características modelo viável: vw audi vau Seat Skoda carros com conector OBD2 (w / o ônibus pode) funções: redefinir os intervalos de inspecção (Óleo - padrão) 15km 30 km (inspecção 1 - longlife) 50 km (inspeção 2 - longlife) uso: conectar o dispositivo no soquete OBD2 do carro tudo de led irá piscar e depois ficar em virar a chave de ignição para habilitar a placa eletrônica, mas não ligar o motor pressione o botão para a operação que deseja realizar em breve o led da operação escolhida acende e outro LED será desligado LED irá executar uma cadeia leve, o que significa reset é feito |
|
|
com cabo KKL VAG-COM para vw / audi 409,1 $10.62 Dimens otilde;es (cm): 8.7 x 4 x 2 Peso (Kg): 0.15 |
|
|
COM-Kabel KKL VAG-COM für VW / Audi 409,1 $10.62 Ma szlig;e (cm): 8.7 x 4 x 2 Gewicht (kg): 0.15 |
|
|
com câble KKL vag-com pour VW / Audi 409,1 $10.62 Dimensions (cm): 8.7 x 4 x 2 Poids (kg): 0.15 |
|
|
com cavo KKL VAG-COM per vw / audi 409,1 $10.62 Dimensioni (cm): 8.7 x 4 x 2 Peso (kg): 0.15 |
|
|
VAG Rounded Std Thin $25 VAG Rounded Std Thin |
|
|
VAG Rounded Std Light $25 VAG Rounded Std Light |
|
|
VAG Rounded Std Bold $25 VAG Rounded Std Bold |
|
|
VAG Rounded Std Black $25 VAG Rounded Std Black |
|
|
Antligen Pa Vag $15.99 Antligen Pa Vag |
|
|
Cabo USB KKL VAG-COM para vw / audi 409,1 $10.62 Dimens otilde;es (cm): 8.7 x 4 x 2 Peso (Kg): 0.12 |
|
|
ELM327 obd 2 interface de diagnóstico cabo vag-com $20.43 Dimens otilde;es (cm): 7.5 x 7 x 2 Peso (Kg): 0.31 |
|
|
USB-Kabel KKL VAG-COM für VW / Audi 409,1 $10.62 Ma szlig;e (cm): 8.7 x 4 x 2 Gewicht (kg): 0.12 |
|
|
ELM327 OBD 2 Diagnose-Schnittstelle VAG-COM-Kabel $20.43 Ma szlig;e (cm): 7.5 x 7 x 2 Gewicht (kg): 0.31 |
|
|
elm327 obd 2 interface de diagnostic VAG-COM du câble $20.43 Dimensions (cm): 7.5 x 7 x 2 Poids (kg): 0.31 |
|
|
câble usb kkl vag-com pour VW / Audi 409,1 $10.62 Dimensions (cm): 8.7 x 4 x 2 Poids (kg): 0.12 |
August 30th, 2007 in
Uncategorized