Torque Pro Wrench

Torque Pro Wrench

TaylorMade Introduces R9 SuperDeep TP Driver

TaylorMade Introduces R9 SuperDeep TP Driver

TaylorMade Introduces R9 SuperDeep TP Driver

TaylorMade Golf has released another new driver to the market, but this one isn't for everyone. The new SuperDeep TP is a pure player's driver, descended from the legendary 300 Tour and R510 TP, according to the following press release:

CARLSBAD, Calif. (May 19, 2010) – TaylorMade, the No. 1 driver brand in golf, proudly introduces the R9™ SuperDeep TP, a pure player's driver descended from the 300 Tour and R510 TP, both  wholesale golf clubs wholesale golf clubs legendary among tour pros and highly skilled players.

The R9 SuperDeep TP driver is engineered to promote a mid launch-angle and low spin-rate for strong swingers who tend to launch the ball too high and with too much spin with other drivers. The ultra-deep clubface (2.55 inches tall) is the deepest of any TaylorMade driver ever, and the head height is equal to the USGA limit (2.8 inches). The head is also more compact from heel to toe than other drivers like R9 SuperTri and Burner® SuperFast. This gives R9 SuperDeep TP a lower MOI which, combined with its forward CG location makes it more workable for players who like to shape their tee shots.

 

Its combination of Flight Control Technology (FCT) and Movable Weight Technology™ gives you a choice of 448 possible launch condition combinations. R9 SuperDeep TP comes equipped with Aldila's new R.I.P. graphite shaft with Reverse Interlaminar Placement technology, which delivers low torque while promoting increased hoop strength and increased tip stability.

Appearance-wise, R9 SuperDeep features an all-black finish, including the clubface, and includes TaylorMade's famous TP logo on the toe, and comes with an all-black headcover with magnetic closure.

"This driver isn't for everybody," said Tom Olsavsky, TaylorMade senior director of metalwood development. "It was created for the select few who generate a rare combination of high clubhead speed, high clubhead control and high smash factor. If you're that player, this is the driver you've been waiting for."

The R9 SuperDeep TP driver is available in three right-handed lofts (8.5, 9.5, and 10.5) and one left-handed loft (9.5). Three R.I.P. shaft flexes – R (60 grams), S (70 grams), X (70 grams). It includes a TP case with an R9 torque wrench (to adjust the FCT position and remove and install MWT® weights) and eight MWT weights: 1-gram, 4-gram, 6-gram, 8-gram, 10-gram, 12-gram, 14-gram and 16-gram. Availability starts on May 15, 2010 at a street price of $599. We'll have a SuperDeep TP to test and review very soon, so stay tuned for that one. If you are a five or below handicap and generate enough club head speed to hit the ball over 275 yards, you'll probably want to read about this driver!

So far in our initial test hits, it's been very positive. Having hit about 20 balls with this beast, I can tell you that in stock form it is an anti-hook machine! The stock weights are set at 16g in the toe and 1g in the heel, creating a very fade biased setup. It hits low spinning bombs, but curiously not many  wholesale golf equipment on tour have put it in their bags, favoring the Burner SuperFast TP or SuperTri. Stay tuned!

 

The detail of TaylorMade Introduces R9 SuperDeep TP Driver

 

Every element of the TaylorMade Burner Irons 09 is engineered to work with the next to promote more speed and more distance.

 

The 2009 Burner irons offer longer and more consistent distance in every iron with more distinct distance-gaps between long- and middle-irons. The long-, middle- and short-irons were separately engineered so you get long and forgiving long-irons, long and accurate middle-irons and accurate and responsive short-irons.

 

 

Inverted Cone Technology offers an extra-large sweet spot for added forgiveness on off-center hits for greater distance consistency  online golf clubs  from shot to shot. A multi-functional sole creates a low CG (center of gravity) position while reducing turf-drag and promoting the exceptional playability of a thin sole while the multi-material cavity badge dampens vibration and sound to promote extraordinary feel.

 

Features:

 

  1. Improved SuperFast Technology promotes immense distance
  2. High COR (coefficient of restitution), high MOI (moment of inertia) and progressive offset for longer, straighter shots
  3. Exceptionally easy to launch, especially the long-irons
  4. Advanced Multi-Functional sole design, progressively thicker toplines 
  5. Sophisticated cavity-badge delivers super-soft feel and sound

About the Author

We provide very competitive wholesale prices to our resellers who aim to develop their business.All of our clubs   are imported from an authorized and certificated supplier，guarantees that our products will be of the highest quality available, made of high grade materials, and play with high performance.

Adjustable Torque Wrench Adapter $42.99 Motion Pro Adjustable Torque Wrench Adapter Torque any fastener with a combination wrench or Allen wrench Will work with 6mm (1/4 in) through 19mm (3/4 in) combination wrenches Will work with 6mm and 8mm Allen wrenches Heat-treated steel with a black oxide finish 3/8" square drive is rated for a maximum torque of 90 ft-lbs Wrenches not included

Spoke Torque Wrench Set $148.99 Excel Spoke Torque Wrench Set Accurately build and maintain your wheels Allows you to increase or decrease torque on spokes Lightweight chrome, aluminum body, calibrated to + or - 2 percent accuracy 6pc. set includes chrome aluminum bodied wrench, 1 chrome plated Pro Series 6pt. spline drive head, and 4 popular Japanese and other O.E. conventional type head sizes: 6.1, 6.3, 6.5, and 6.7mm All heads are made from S45C hi-carbon steel, heat treated to an HRC 40-45 hardness Comes in a handy composite RK Excel logo box (Blue) Wrench has adjustability ranging from 5-60Lbs./inch N.m and Kg.m cross reference chart included

Torque Wrench $17.95 Performance Tool Torque Wrench Performance Tool only makes the most precise and accurate tools. Make sure your motorcycle is put together right the first time and avoid any broken bolt problems. 1/2" square drive 19" L with pivoting handle Calibrated 0-150 ft./lb. or 0-20 m/kg Made in the U.S.A.

Replacement Head for Spoke Torque Wrench $15.15 Excel Replacement Head for Spoke Torque Wrench

Torque Wrench Adapter $13.99 This unique tool allows you to properly torque 2-stroke cylinder base nuts Extends the reach of your 3/8-drive torque wrench by 3 inches Made from chrome vanadium tool steel with satin chrome finish Multiply your torque wrench readings by chart supplied with tool for proper torque specifications

Pneumatic Torque Wrench $68.51 A pneumatic torque wrench is a planetary torque multiplier or a gearbox that is mated to a pneumatic air motor. At the end of the gearbox is a reaction device that is used to absorb the torque and allows the tool operator to use it with very little effort. The torque output is adjusted by controlling the air pressure. These planetary torque multiplier gearboxes have multiplication ratios up to 4000:1 and are primarily used anywhere accurate torque is required on a nut and bolt, or where a stubborn nut needs to be removed. The pneumatic torque wrench is sometimes confused with a standard impact wrench, because it looks similar, but is actually a totally different tool. A pneumatic torque wrench is driven by continuous gearing, and not by the Hammers of an impacting wrench. This is why a pneumatic torque wrench has very little vibration, and excellent repeatability and accuracy. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 88 Publication Date: 2010/08/30 Language: English Dimensions: 6.00 x 9.02 x 0.21 inches

Park Tool TW-2 Torque Wrench $44.99 Park Tool TW-2 Torque Wrench. Because torque specifications are now given for most parts and accessories, Park Tool now offers the TW-2 it's a tough, accurate 3/8 drive torque wrench.

Spin Doctor Torque Wrench Set $64.99 Spin Doctor Torque Wrench Set. Confidently install components according to manufacturers' recommended torque specifications with the Spin Doctor Torque Wrench Set. a href=/images/performance/web/PDFs/40-4160 Spin Doctor Torque Wrench_INST_V2.pdf target=_blankClick for Instruction Manual/a

Great Neck 3/8'' Drive Torque Wrench/Adaptor $14.95 Great Neck 3/8'' Drive Torque Wrench/Adaptor

Micrometer Adjustable Torque Wrench $54.99 Bikemaster Micrometer Adjustable Torque Wrench Micrometer-type sleeve allows accurate pre-set torque values to be set Reversible ratchet head Available with 3/8” or 1/2” Sq. Dr 3/8" Sq. Dr Marked range (5-80 ft lbs) 1/2" Sq. Dr Marked range (10-150 ft lbs)

ATV Axle Wrench Set $37.99 Motion Pro ATV Axle Wrench Set Made from heat-treated steel Includes a 1/2" drive slot for use with a torque wrench or breaker bar Fits most Honda TRX 250X, 300X, 300EX, 400X, 400EX, 450R and 450EX

Raider Spoke Torque Wrench Set $54.03 Keep this handy torque wrench kit close for your fixing needs. This 7-piece kit includes a wrench and six popular head sizes. Brand: Factory SpecMaterial: Aluminum Raider Spoke Torque Wrench SetLightweight aluminum construction7-piece kit includes wrench and 6 popular head sizesAllows increase or decrease torque on spokesDimensions: 6 inches x 6 inches x 6 inches

Challenge Micrometer Torque Wrench $24.99 Internal manufacturer's 1 year guarantee. Plastic carry case included. Accessories included: 5in Extension bar. Wrench. Size H6.3, W49, D8cm. Weight 1.8kg. Ideal for tightening wheel nuts. Operating range 28 to 210Nm. By Challenge.

Flexible High Torque Wrench by Performance Tool $32.99 Breaker bar;1/2 in. drive;18 in. length;Ratcheting Flexible High Torque Wrench by Performance Tool

Porter-Cable PT382 3/8-in Impact Wrench (125 ft-lbs. torque) $59.99 3/8-in Impact Wrench (125 ft-lbs. torque) - PT382. Operating Manual

3/8 Inch Drive Inch lb Torque Wrench by Wilmar Tools for Jeep $55.99 Precision Prolock Torque Wrench;25-250 in. lb.;3/8 in. drive 3/8 Inch Drive Inch lb Torque Wrench by Wilmar Tools for Jeep

1/2 Inch Drive lb Torque Wrench by Wilmar Tools for Jeep $78.99 Precision Prolock Torque Wrench;30-250 ft. lb.;1/2 in. drive 1/2 Inch Drive lb Torque Wrench by Wilmar Tools for Jeep

Leupold Mark 4 Base Torque Wrench - 48701 $137.8 This Leupold Mark 4 Base Torque Wrench is designed to deliver the proper torque value (65-in. Lbs. ) when installing Mark 4-style rings for return-to-zero accuracy.

Proto Kit Rep Torque Wrench. 1 Kit $12.94 Manufacturer: Proto. 1 Kit. Drive Size = 1/2 in For Model = 6014, 6014M, 6014NM, 6016, 6016M, 6016NM, 6068, 6072 Material = Tool Steel Type = Repair Kit Customers also search for: Discount Kit Rep Torque Wrench, Buy Kit Rep Torque Wrench, Wholesale Kit R

Proto® - Torque Wrench Ratchet Repair Kits $15.8 Handy and convenient ratchet repair kit. Proto® - 1/2?dr Ratchet Repair Kit, Torque Wrench. Torque wrench ratchet repair kit for models 6016M, 6016NM, 6068 and 6072. Also for models 6014, 6014M, 6014NM and 6016. With 1/4" to 1" ratchet wheels manufactured from strong alloy steel for uncompromising toughness and durability. Easily manage field repairs on torque wrench ratchet heads with compatible repair kits.

K Tool International 1/2" Drive Torque Wrench. Each $81.54 Manufacturer: K Tool International. Each. 25-250 ft/lbs. Clicks when torque is achieved. Packaged in plastic molded case. Customers also search for: Discount 1/2" Drive Torque Wrench, Buy 1/2" Drive Torque Wrench, Wholesale 1/2" Drive Torque Wrench, 76962

Armstrong Tools Electronic Torque Wrench, 3/8 Drive. Each $311.26 Manufacturer: Armstrong Tools. Each. Electronic torque wrench with ease of use, strength, and productivity Customers also search for: Discount Electronic Torque Wrench, 3/8" Drive, Buy Electronic Torque Wrench, 3/8" Drive, Wholesale Electronic Torque Wren

Ergo Spoke Wrench $11.99 Motion Pro Ergo Spoke Wrench Unique combination wrench design is 3-sided Open end and semi-closed end Use open end for quick adjustment of spoke nipples and semi-closed end for those hard to turn nipples that require more torque Specially designed ergonomic handle allows larger turning radius and excellent grip and feel Polished finish with laser engraved logo and size markings Limited lifetime warranty Patent pending Available as: Set of 6 - includes 5.0, 6.0, 6.3, 6.5, 6.8, and 7.0mm Or Individually

6007Pb - Box Torque Wrench $23.64 [577-6007PB] Truck Delivery UPC: 662679533717

3/8? Gearwrench Micrometer Torque Wrench $119.95 ? Sealed tear drop design keeps out contaminants for superior performance and life and provides better access over round head designs. ? +/- 3% accuracy. ? Locking collar allows easy setting of desired torque and prevents accidental change of torque setting while in use. ? One finger operated reversing lever. ? Pliable elastometer handle grip for comfort and oil resistance. ? Includes blow molded storage case. ? 25-250 in.-lbs., 13.8? Length.By K-D Tools.

1/2? Gearwrench Micrometer Torque Wrench $119.95 ? Sealed tear drop design keeps out contaminants for superior performance and life and provides better access over round head designs. ? +/- 3% accuracy. ? Locking collar allows easy setting of desired torque and prevents accidental change of torque setting while in use. ? One finger operated reversing lever. ? Pliable elastometer handle grip for comfort and oil resistance. ? Includes blow molded storage case. ? 10-150 ft.-lbs., 21.2? Length.By K-D Tools.

3/4? Gearwrench Micrometer Torque Wrench $479.95 ? Sealed tear drop design keeps out contaminants for superior performance and life and provides better access over round head designs. ? +/- 3% accuracy. ? Locking collar allows easy setting of desired torque and prevents accidental change of torque setting while in use. ? One finger operated reversing lever. ? Pliable elastometer handle grip for comfort and oil resistance. ? Includes blow molded storage case. ? 100-600 ft.-lbs., 41.4? Length.By K-D Tools.

Blackhawk™ By Proto® 1/2" Drive Torque Wrench. Each $168.98 Manufacturer: Blackhawk™ By Proto®. Each. Desired torque value is pre-selected by use of a micrometer type scale When exact torque level is reached, wrench releases with an audible "click" Wrench resets automatically to same torque setting Ball bearing-mo

K Tool International 3/8" Drive Torque Wrench. Each $44.85 Manufacturer: K Tool International. Each. Features Benefits: 20-200 in/lbs Clicks when torque is achieved Packaged in plastic molded case Customers also search for: Discount 3/8" Drive Torque Wrench, Buy 3/8" Drive Torque Wrench, Wholesale 3/8" Drive

Pro Comp X Wrench $32.99 Professional Grade Tool Box Quality Wrench

3/8'' Drive Micrometer Torque Wrench $111.95 Fast, accurate and easy to use torque wrenches have accuracy +/-4% right hand (clockwise) and +/-6% left hand (counter clockwise). Reversible ratchet head features a 45-tooth ratchet design requiring only 8 degrees of hand travel for indexing. English and metric markings are color coded for easy reading. Ball bearing-mounted internal torque control mechanism provides proper lubrication, high accuracy, prolonged calibration life and consistent results. Positive, spring-loaded locking mechanism automatically locks in the selected reading to prevent accidental change. English Range: 25 to 250 in.-lb. (1 in.-lb. grad.) Metric Range: 3.61 to 29.03 Nm (.11 Nm grad.) Length: 13.1''By K-D Tools.

1/2'' Drive Micrometer Torque Wrench $137.95 Fast, accurate and easy to use torque wrenches have accuracy +/-4% right hand (clockwise) and +/-6% left hand (counter clockwise). Reversible ratchet head features a 45-tooth ratchet design requiring only 8 degrees of hand travel for indexing. English and metric markings are color coded for easy reading. Ball bearing-mounted internal torque control mechanism provides proper lubrication, high accuracy, prolonged calibration life and consistent results. Positive, spring-loaded locking mechanism automatically locks in the selected reading to prevent accidental change. English Range: 25 to 250 ft.-lb. (1 ft.-lb. grad.) Metric Range: 43.4 to 348.4 Nm (1.4 Nm grad.) Length: 20.5''By K-D Tools.

Nocord WWT1430 Digital Torque Control Wrench Digiwrench $70.87 The DigiWrench a Digitally Controlled 12 Volt DC DIY Impact Wrench is the only impact wrench of its kind in the world allowing you to digitally select your desired amount of torque. It has a 1/2 Drive 250 FtLbs ratio. With 4 socket sizes you don t have to worry about it being a perfect fit. The sockets themselves are specially designed to compensate for over and under tightening. The Patented Digital Torque Control with LED display will allow you to easily adjust the torque settings according to your needs. The Patented clutch system works to prevent backlash and to reduce overall power consumption. And just in case it comes with a replacement fuse. Digital Readout Digital Adjustable Torque 12 Foot Extension Cord Replacement Fuse Two DoubleSided Sockets: 17mm 19mm 21mm 23mm Max Torque: 250 FtLbs 12V DC Car Lighter Plug Adapter Blow Mold Case Patented Color: Dark Grey