Ton Portable Hydraulic

Ton Portable Hydraulic

Portable Diesel Generators - The Life-line for Coal Miners

The U.S. has produced more than 1 billion tons of coal annually for each of the last 15 years and this industry directly employs nearly 134,000 people in the US alone. As fossil fuels become more rare and more politically disadvantageous to depend upon, the energy market has looked to renewable energy sources and other fossil fuels such as coal.

Coal is one of the answers to the burning global energy crisis. However, all types and sizes of diesel generators are required in coal mining - particularly in remote places such as near mountains or major deserts. Since most of the equipment used in mining involves either electricity or hydraulic motors, it is essential that portable diesel generators are a part of the mines' inventory at every mine site. Diesel and natural generators are responsible for providing the necessary electricity for all the illumination in the mineshaft, for the conveyor belt that brings the product to the surface, and for much of the equipment that drills the coal from the walls of the mine shaft.

In most coal mining operations, there are one or two main power lines that supply all the electricity to the necessary machinery in the mineshaft. Adding to the power dependency of coal mining is the fact that coal mining remains mostly an underground endeavor. Diesel generators are important in that they supply all electricity to the mine, however the mine could not even function if they did not supply the necessary power to all the lighting needed in the shaft. Local miners rest and take their meals to special compartments in the mineshaft and leave the area where active mining and explosive processes are in action. It is critical that diesel generators are able to supply these areas with electricity, so that miners' lives can be spared and they can sit and relax n the break areas, and those same miners have enough light to see in the rest of the mineshaft where active drilling is underway. Portable diesel generators also supply electricity for much larger pieces of equipment, equipment that pulls much more electricity than the lights in the mineshaft.

One of the most important pieces of equipment is the conveyor belt that starts at the end of the mineshaft and ends at the surface. This machine is responsible for bringing all the coal that is mined at the active drilling site to the surface. Without an active conveyor belt in the mineshaft, there would be many wasted man-hours of hauling the coal from the end of the shaft all the way to the surface. In some cases, this is more than half a mile.

By providing electricity to the mineshaft through the main power cables, diesel generators are able to save mining corporations a large sum of money that would be used for simple tasks such as bringing the coal to the surface. Instead, because there is electricity in the mineshaft to run machines such as the conveyor belts that go all the way along the mineshaft, a simple task that would take a long time is done automatically by the conveyor belt.Power generators are responsible for the operation of many of the actual tools involved in mining for coal.

There are numerous drills that require electricity in order to operate. Many of these tools are located at the active mining site, so it is important that electricity can get to them, enabling the mining processes to continue at a steady pace. Coal cutting tools cut pieces of coal into smaller pieces that can then be transferred to the conveyor belt. After explosives have removed the coal from the veins of coal in the walls of each cave, then they are usually used. Many of these tools run exclusively on electricity, so portable diesel generators are vital not only to get the coal out of the mine shaft via the conveyor belt, but for also getting it actually onto the conveyor belt.

Diesel and HFO generators are essential tools for a coal mining operation, because of all the benefits that come along with being able to use electric tools. Miners are able to work long hours, because of the artificial lightning provided by electricity supplied by power generators. The conveyor belt is supplied by electricity created by power generators, and this is the only efficient method of getting coal out of the deep mine shaft. Electricity is needed by many of the coal cutting tools found at the actual active mining site within the mineshaft. Power generators allow these tools to operate so that the coal can be broken up into pieces small enough to be put onto the conveyor belt. Coal mining may be a dangerous and dusty occupation, but coal is the primary source ultimately that allows people around the world to heat their homes in the winter.

Coal mining remains an essential element of our economic strength, and fortunately, the coal-mining corporations are making the necessary investments to keep the people who bring us the coal to heat our homes, safe and alive to see another day. Diesel generators are essential in the safety aspects of working in a mine, and they are essential for the economics of the mining operations.

About the Author

Check out our HUGE
inventory
of diesel generators, natural gas generators, containerized HFO generators, gas turbines and switchgear. We can delivery your new power station faster than anyone in the world and can
install
it many times in under 4 weeks. Please email us at info@uspeglobal.com or call today!

Blackhawk 10 Ton Hydraulic Ram $177.95 10 Ton Capacity Ram only

JET 655554 JBJ-12, 12 Ton Hydraulic Bottle Jack $89 12 Ton Hydraulic Bottle Jack - 655554

Champion 22 Ton Horizontal/ Vertical Hydraulic Log Splitter (Partially Assembled) $3989.39 Hydraulic Log Splitter*Item: Champion 22 Ton Hydraulic Log Splitter with Log Cradle (Partially Assembled)*Intended use: Splitting logs up to 24 inches/ 100 lb.*Dimensions: 46 in. H x 41 in. W x 86 in. L*Materials: steelModel No: 92207Color: yellow/ black*Electric/Gas: gasThe Champion 92207 22 hydraulic log splitter provides heavy duty, dependable, and portable log splitting. The unit is powered by a 196cc Champion single cylinder, 4-stroke OHV engine with a .93 gallon fuel tank and .63 quart oil capacity and automatic low oil shutdown. With a 14 second no load cycle time, adjustable stroke return, and integrated log cradle the splitter can accommodate up to 24 inch long logs with a maximum weight of 100 pounds. The unit is built on a towable frame with an integrated 2 inch ball hitch couple and DOT approved wheels and can easily be operated either vertically or horizontally.Key Features:Horizontal and vertical operation14 second no load cycle time8.5 second cycle time on 16 in. logsUp to 250 cycles per hourSkewed wedge to hold logs in placeAdjustable wedge stroke - 24, 20, and 16 in.Extended receiver hitch neck2 in. hitch ball couplerDOT approved wheelsFits in the bed of most trucksSpecifications:Engine: 196cc Champion OHV engine (4-stroke, single cylinder), Low oil shut-off for safety, Easy pull recoil start, Cast iron sleeve for durabilityMax. log size 24 in.Max. log weight 100 lb.Max pressure 3500 PSIHydraulic oil capacity 5 gal.Includes:Integrated log cradle16 in. DOT approved wheels5 gallons hydraulic oilLog catcher available separately

Cui-cui, ton portable sonne $6 Cui-cui, ton portable sonne - Sweety

View Showing a 50 Ton Casting in Hydraulic Press $79.99 John Phillips View Showing a 50 Ton Casting in Hydraulic Press - Premium Photographic Print

Champion 22 Ton Horizontal/ Vertical Hydraulic Log Splitter with Log Catcher (Unassembled) $2696.32 Hydraulic Log Splitter*Item: Champion 22 Ton Hydraulic Log Splitter with Log Catcher (Unassembled)*Intended use: Splitting logs up to 24 inches/ 100 lb.*Dimensions: 46 in. H x 41 in. W x 86 in. L*Materials: steelModel No: 92210Color: red/ black*Electric/Gas: gasThe Champion 92210 22 hydraulic log splitter provides heavy duty, dependable, and portable log splitting. The unit is powered by a 196cc Champion single cylinder, 4-stroke OHV engine with a .93 gallon fuel tank and .63 quart oil capacity and automatic low oil shutdown. With a 14 second no load cycle time, adjustable stroke return, and integrated log cradle the splitter can accommodate up to 24 inch long logs with a maximum weight of 100 pounds. The unit is built on a towable frame with an integrated 2 inch ball hitch couple and DOT approved wheels and can easily be operated either vertically or horizontally.Key Features:Horizontal and vertical operation14 second no load cycle time8.5 second cycle time on 16 in. logsUp to 250 cycles per hourSkewed wedge to hold logs in placeAdjustable wedge stroke - 24, 20, and 16 in.Extended receiver hitch neck2 in. hitch ball couplerDOT approved wheelsFits in the bed of most trucksSpecifications:Engine: 196cc Champion OHV engine (4-stroke, single cylinder), Low oil shut-off for safety, Easy pull recoil start, Cast iron sleeve for durabilityMax. log size 24 in.Max. log weight 100 lb.Max pressure 3500 PSIHydraulic oil capacity 5 gal.Includes:Integrated log cradle and log catcher16 in. DOT approved wheels

Sunex SUN5220 Hydraulic Shop Press 20 Ton $1072.25 All welded steel contruction. Heavyduty return springs for fast ram retraction. 20 Ton Hydraulic unit included. Reinforced head plate. Designed and made in the U.S.A hydraulic jack imported. Bed plates bearing punch and bearing sheild included as standard equipmentSpecifications:Capacity: 20 tonsHeight: 67 Base width: 32 Stroke: 7 Shipping weight: 265 lbs.

Hydraulic Shop Press - 25 Ton $799.95 ? Ideal for removal and installation of gears, universal joints, pulleys, wrist pins, bending/straightening and other various jobs. ? Heavy-duty gauge steel construction ? 8-position bed for work height adjustment Specifications: Capacity: 25 ton Ram stroke: 6'' Max workpiece height: 34-1/4'' Dimension: 28''Wx28''Dx58''H Weight: 263 lbs.By Omega.

15 Ton Hydraulic Shop Press $2482.95 For pressing, bending and straightening operations Easy-to-use, hand-operated with pressure gauge for direct pressure readings Tables raise and lower easily with use of hand crank on the 15-, 35- and 60- ton models Side frames are open for inserting long material Fast setup ram extension screw Ram moves laterally for added versatility (15- and 35-ton models) By JET.

Hydraulic Floor Jack - 2 Ton $536.95 ? The strongest jack frame in its class; features flanged edges, both top and bottom, to resist twisitng ? Sealed cylinder prevents contamination of hydraulic system ? Conforms to ANSI PALD Part 10 ? Carries OTC's Lifetime Marathon Warranty? ? Assembled in U.S.A. Specifications: Lifting range: 3-3/4'' to 22-3/4'' Saddle: 6'' diameter Handle length: 48'' Frame height: 6-1/2'' Frame length: 30'' By OTC.

OTC OTC1510B 10 Ton Hydraulic Service Jack $1327.66 Features and Benefits: 10 ton capacity with a lifting range of 63/8 to 22 Saddle diameter: 63/8 Reach: 49 Frame height: 97/8 Floor space: 613/8 x 181/8 OTC s 10 ton hydraulic floor jack is very easy to use and handy to have around your shop. It has a builtin safety overload that prevents using the jack beyond its rated capacity. The convenient foot pedal speeds the lifting operation. Also the handle has a lock and release control located on the top of it which can be locked into any position form vertical to horizontal.Superceded: OTC1510A

Porto-Power Hydraulic Ram - 10 Ton, 10In. Stroke $406.95 ? For use with hydraulic collision repair setsBy Blackhawk Automotive.

A 250 Ton Hydraulic Press and New Formed Cake of Dry Ice, Weighing About 200 Lbs $79.99 A 250 Ton Hydraulic Press and New Formed Cake of Dry Ice, Weighing About 200 Lbs - Premium Photographic Print

BTI MCP910P-9 Hydraulic Shear - Fits 30-40 Metric Ton Excavator $8000 BTI Hydraulic Shear - Fits 30-40 Metric Ton Excavator. 4 7/16" Pin Diameter, 20 1/4" Center of Pin Boss to Center of Pin Boss, 18 1/4" Inside to Inside Pin Boss Spacing. The item appears to be generally complete. The shear functioned as intended during a limited test.

OTC 5 Ton Hydraulic Floor Service Jack. Each $895.49 Manufacturer: OTC. Each. Features Benefits: Spring loaded 40" handle Built in safety load prevents use beyond rated capacity Foot pedal speeds the lifting operation Handle can be locked into any position Lifitng range: 6" to 22" OTC's 5 ton hydraulic f

OTC 10 Ton Hydraulic Service Jack. Each $977.19 Manufacturer: OTC. Each. Features Benefits: Built-in safety overload prevents use beyond rated capacity Foot pedal speeds the lifting operation Handle can be locked into any position 10 ton capacity with a lifting range of 6-3/8 in. to 22 in. Saddle di

Porto-Power Air/Hydraulic Foot Pump - 10 Ton $546.95 ? Includes hydraulic hose, mounting base plate ? 10,000 PSIBy Blackhawk Automotive.

Alltrade 2 Ton Hydraulic Bottle Jack 640405 $34.11 Hydraulic bottle jack. Heavy duty stamped steel frame with fully welded seams. Ductile iron ratchet bar with 10 height settings. 10.38 to 16.38 working range. Holds up to 2 tons. Length: 4. Width: 6.75. Height: 4.63

Brc-25 - 2-1/2 Ton Hydraulic Pullcylinder $562.27 [277-BRC-25] UPC: 66200585800 4 LB

Rcs-1002 - 100 Ton Hydraulic Cyclin $1451.47 [277-RCS-1002] UPC: 66200530216 46.5 LB

Black bull HBJ8 8 Ton Hydraulic Bottle Jack $45.63 Buffalo Tool 8 Ton Hydraulic Bottle Jack has solid cast iron base for maximum stability. Easily lifts heavy loads. Cleated nonslip lift cap adjustable extension screw cap and a replaceable pump cartridge. Solid cast iron base provides maximum stability. Hydraulic bypass prevents ram over travel. Minimum Height is 8 with a maximum Height of 13.25 .

OTC OTC1525 Hydraulic Floor Jack 2 Ton $581.77 The strongest jack frame in its class; features flanged edges both top and bottom to resist twisitng. Sealed cylinder prevents contamination of hydraulic system. Conforms to ANSI PALD Part 10. Carries OTC s Lifetime Marathon Warranty. Assembled in U.S.A.Specifications:Lifting range: 33/4 to 223/4 Saddle: 6 diameterHandle length: 48 Frame height: 61/2 Frame length: 30

Astro Pneumatic ASTTS22 Hydraulic Press20 Ton Capacity $562.39 Features and Benefits:. Heavy duty return springs for fast ram retraction. Reinforced head plate. Arbor plates included. Safety bypass valve assures unit will not exceed rated capacity. Safe and durable. Overall height: 593/8 ; base width: 263/8 ; hydraulic stroke: 53/4 ; press bed width: 221/2 x 4. Meets ANSI standard for performance and safety.

12/20 Ton Capacity Air/Hydraulic Bottle Jack $179.95 Note: These items are subject to a $10.00 oversized shipping surcharge. American Forge and Foundry Air/Hydraulic Bottle Jacks are used to lift heavy-duty trucks, construction and heavy farm equipment. Both have centered pumps and rms with heat treated pistons for balance and easy positioning. Saddles are made of machine-hardened steel. Each is factory pre-tested at 150% of its rated capacity. The also include a bypass system to prevent possible damage from ram over-extension! All AFF (American Forge and Foundry) products can only be shipped to the 48 Continental US States.

22 Ton Axle Jack - Air/Hydraulic $584.95 Compact low profile design for maximum access Heat treated extension screw allows pick-up height adjustment Patented bypass device protects hydraulic system from over-pumping damage Quick rated capacity lift using air actuated operation User friendly, self-returning spring minimizes operator's effort, greatly reducing fatigue Inline air filter traps contaminates and protects air motor for longer life Sturdy, one-piece T-handle with handle-top metered control release valve By Omega

Porto-Power Hydraulic Collision Repair Kit - 4 Ton $270.95 ? Snap-lock design for quick, easy assembly. ? Automatic pump overload system protects against damage to rams and equipment ? Heavy-walled extension tubes stand up in the toughest situations ? Flex head features permanently molded rubber pad - interlocked to prevent seperation ? Long handles provide low pumping effort. ? 1/2 ton capacity hydraulic spreader features 2'' jaws and spreads from 5/8'' to 3-3/4'' Includes: 4-ton hydraulic pump, 4-ton hydraulic ram, 6' hose with coupler, flex head, flat base, 1/2-ton spreader, male connector, ram toe, plunger toe, wedge head, 90? V base, serrated saddle, 19-1/2'' extension tube, 16-1/2'' extension tube, 8-1/2'' extension tube, 6'' extension tube, 3'' extension tube, and carrying case. By Blackhawk Automotive.

Porto-Power Hydraulic Collision Repair Kit - 10 Ton $451.95 ? Snap-lock design for quick, easy assembly. ? Automatic pump overload system protects against damage to rams and equipment ? Heavy-walled extension tubes stand up in the toughest situations ? Flex head features permanently molded rubber pad - interlocked to prevent seperation ? Long handles provide low pumping effort. ? 1/2 ton capacity hydraulic spreader features 2'' jaws and spreads from 5/8'' to 3-3/4'' Includes: 10-ton hydraulic pump, 10-ton hydraulic ram, 6' hose with coupler, flex head, flat base, 1/2-ton spreader, male connector, ram toe, plunger toe, wedge head, 90? V base, serrated saddle, 27'' extension tube, 18'' extension tube, 10'' extension tube, 4'' extension tube, and mobile carrying case.By Blackhawk Automotive.

Blackhawk Automotive BLAB65428 PortoPower Air/Hydraulic Foot Pump 10 Ton $753.61 Includes hydraulic hose mounting base plate. 10 000 PSI. Manufactured to the highest quality available. Satisfaction ensured.

Omega OME23222 22 Ton Low Profile Hydraulic Jack $965.91 The Omega 22 ton Low Profile Axle Jack can reach heights as low as 81/4 . The maximum height is 217/8 . With chrome plated rams this Omega Axle Jack is a workhorse in the professional market. Hydraulic lift: 45/8 ; extension screw: 37/8 ; jack size: 217/8 x 123/8 . Heattreated extension screw allows low pickup height adjustment and maximum lift height. Sturdy one piece handle assembly is standard on all Omega Truck Jacks. U.S. Patented builtin bypass device protects hydraulic system from over pumping damage. Inline air filter traps contaminates and protects air motor for longer life. A choice of three handle angles: 90 degrees for space saving storage 45 degrees for easy carrying movement 0 degrees for access to lifting point

Hydraulic Body/Frame Repair Kit- 4 Ton Capacity $239.95 ? Quick connect technology for effortless assembly of attachments to meet your pushing and pulling needs ? Custom fitted molded carrying case ? Safety overload mechanism to prevent ram and cylinder damage ? Includes: Hand pump; hydraulic hose; 10 ton ram; 3'', 6-1/8'', 8-1/2'', 16-1/2'', 19-1/2'', and 27'' extension tubes; male connector; wedge head; serrated saddle; flat base; ram toe; plunger toe; rubber head; 90? combination head; spreader; dust cover (for hose); dust cover (for ram); hose coupler; ram coupler; molded case.By Omega.

Hydraulic Body/Frame Repair Kit- 10 Ton Capacity $431.95 ? Quick connect technology for effortless assembly of attachments to meet your pushing and pulling needs ? Custom fitted molded case has roller wheels for easy portability. ? Safety overload mechanism to prevent ram and cylinder damage ? Includes: Hand pump; hydraulic hose; 10 ton ram; 18'', 10'', 4-1/8'', and 28'' extension tubes; male connector; wedge head; serrated saddle; flat base; ram toe; plunger toe; rubber head; 90? combination head; spreader; dust cover (for hose); dust cover (for ram); hose coupler; ram coupler; molded case.By Omega.

OTC OTC1505B 5 Ton Hydraulic Floor Service Jack $1048.16 Features and Benefits: Spring loaded 40 handle Lifting range: 6 to 22 Saddle diameter: 51/8 Overall reach: 47 Frame height: 73/4 OTC s 5 ton hydraulic floor jack is very easy to use and handy to have around your shop. It has a builtin safety overload that prevents using the jack beyond its rated capacity. The convenient foot pedal speeds the lifting operation. Also the handle has a lock and release control located on the top of it which can be locked into any position form vertical to horizontal.

Ton Ton Ton $6 Ton Ton Ton - Nicky Jam