Slotted Driver
Slotted Driver
 |
 26 PC MAGNETIC DRILL BIT DRIVER PHILLIPS SLOTTED SET  US $4.99
|
 Silverline 3 Way Slotted Screw Driver 4Mm 5Mm 6Mm Heavy Duty Tools US $4.36
|
Installing Modems and Modem Device Drivers
In order to enjoy internet access, a device known as a modem must be connected to your computer. These devices come in various forms, but the most common types are cable, dial-up and DSL modems. The type of modem you will require all depends on your internet connection.
The key to finding out what type of modem you need is learning about the internet services offered in your area. The easiest type of service to obtain is dial-up access over traditional phone lines. Unfortunately, dial-up just happens to be the slowest internet connection available. Cable and DSL are considered as broadband services and tend to be much faster. Short for Digital Subscriber Line, DSL is a type of service that you may or may not be able to obtain from your local phone company. Although DSL is fast, cable connections offer more speed. This type of connection can be obtained from a cable company that provides internet access. Because these connections use a different means for connecting to the internet, each requires a compatible modem.
Dial-up Modems
Dial-up modems are typically pre-installed into a computer, while cable and DSL modems come in external variations. If there is no modem in your computer, you will need to physically install one. To begin, shut down the machine, unplug it from the power source, and disconnect all peripherals. After removing the case and metal plate for the expansion slot, insert the modem into vacant slot in a gentle, but firm motion. Put the machine back together and connect an available phone cord into the line jack for the modem.
Whether you install an internal or external dial-up modem, device drivers will need to be installed as well. Drivers will enable your modem and operating system to communicate with each other. To install the device drivers, enter the installation disc that came with your hardware and follow the prompts for adding new hardware. After the installation, you should reboot your computer and have no problems making a dial-up connection.
Cable and DSL Modems
If you want to install a cable or DSL modem, it is important to know that an NIC (Network Interface Card) is required. Most new computers today come with these devices pre-installed. Both a cable and DSL modem will also come included with a CAT5 cable that allows you to connect the hardware to your computer. Aside from being connected to the computer, your modem will need a direct connection to the internet. To achieve this, you will need your phone company or cable provider to install a special jack in your home. Simply use the provided cable to connect the modem to the jack.
Just as with dial-up modems, cable and DSL modems require device drivers in order to function properly. The hardware should come included with an installation disc that allows you to install the appropriate drivers. Keep in mind that you may be required to follow additional tasks after the installation as specified by your service provider.
About the Author
Adam K Smith is an eminent author on Device Drivers for all types of Computers. To Safely Update All Your Drivers and Fix Your Drivers Problem Instantly Visit: http://www.fixyourdrivers.com/
|
|
WeiTus 1.5x50 Aluminum Alloy Screw Driver (Slotted) $2.3 WeiTus 1.5x50 Aluminum Alloy Screw Driver (Slotted) |
|
|
SSBC Slotted Brake Rotor $91.99 1999-04 WJ Grand Cherokee;Driver side front;Turbo slotted and plated;Quicker stops and longer life |
|
|
Power Slot Slotted Brake Rotor $82.99 2002-06 Liberty;Driver side |
|
|
The Driver $5.99 The Driver |
|
|
Slotted screwdriver Pack of 36 $58.97 The slotted screwdriver has a contoured rubber handle for a comfortable and tight grip. Made of sturdy metal and textured rubber. Comes packaged on a plastic tie card with hanging hole. Measures 10 long with a 6 driver blade. Dimensions:. Length: 9. Height: 9. Width: 9 |
|
|
Stanley Proto Blackhawk SBHW9505 .38 in. Drive .18 in. Wide Tip Slotted Screw Driver Bits $26.08 This is a 3/8 Drive 3/16 Wide Tip Slotted Screwdriver Bits. Length: 31/4 . Slotted Bit Size: 31/4 . Constructed from the highest quality materials. |
|
|
Slotted Brake Rotor by SSBC for Jeep $136.99 1974-83 SJ;Driver side front;Turbo slotted and plated;Quicker stops and longer life JEEP CHEROKEE WAGONEER 1977 1978 1979 4.2L (258) 5.9L (360) 6.6L (401) GAS Slotted Brake Rotor by SSBC for Jeep |
|
|
26034 - 3.0X150Mm Precision Slotted Screw- Driver $12.82 [817-26034] UPC: 084705260341 0.07 LB |
|
|
Makita MAK784810A Bit Driver / Finder $23.65 The Makita 784810A is a must have for every contractor and/or DIY. Excellent control for inserting and extracting screws. This set includes: 1 original finder/driver 1 each #2 Phillips amp; 68 slotted insert bit. For use with any corded or cordless drill or driver. Works best with screws 21/2 to 31/2 in length. |
|
|
1/2'' Impact Driver $31.95 ? Loosens hard-to-turn screws, bolts or nuts. ? Handle design prevents possibility of hitting hand with hammer when striking impact driver. ? Bit holder 1/2'' drive and 5/16'' hex for Phillips and flat screwdriver bits. ? Includes eight screwdriver bits: No. 2 Phillips bit, 1-3/8'' long with 5/16'' hex No. 2 Phillips bit, 3-1/8'' long with 5/16'' hex No. 3 Phillips bit, 1-3/8'' long with 5/16'' hex No. 3 Phillips bit, 3-1/8'' long with 5/16'' hex 5/16'' wide x 1-3/8'' long with 5/16'' hex slotted bit 5/16'' wide x 3-1/8'' long with 5/16'' hex slotted bit 3/8'' wide x 1-3/8'' long with 5/16'' hex slotted bit 3/8'' wide x 3-1/8'' long with 5/16'' hex slotted bitBy OTC. |
|
|
3/8'' Impact Driver $30.95 ? Loosens hard-to-turn screws, bolts or nuts. ? Handle design prevents possibility of hitting hand with hammer when striking impact driver. ? Bit holder has 3/8'' drive and 5/16'' hex for Phillips and flat screwdriver bits. ? Includes eight screwdriver bits: No. 2 Phillips bit, 1-3/8'' long with 5/16'' hex No. 2 Phillips bit, 3-1/8'' long with 5/16'' hex No. 3 Phillips bit, 1-3/8'' long with 5/16'' hex No. 3 Phillips bit, 3-1/8'' long with 5/16'' hex 5/16'' wide x 1-3/8'' long with 5/16'' hex slotted bit 5/16'' wide x 3-1/8'' long with 5/16'' hex slotted bit 3/8'' wide x 1-3/8'' long with 5/16'' hex slotted bit 3/8'' wide x 3-1/8'' long with 5/16'' hex slotted bit By OTC. |
|
|
Skil 010-350-SKL 10-Piece T-Handle Driver Set $9.99 T-Handle Driver. 85mm Extension Bar. (4) Phillips Bits: PH0, PH1, PH2 (x2), PH3. (3) Slotted Bits: 1/4-in, 5/32-in, 3/16-in |
|
|
Klein Tools - Vaco® Slotted Screw-Holding Screwdrivers $11.8 Constructed with Comfordome® handle. Screw-holding screwdrivers with spring-steel blade Designed with positive gripping action Comfordome® handle Heat-treated and tempered shank for strength Split-blade screw-holding driver wedges into screw slot Plastic handle material Alloys teel shank material Slotted tip type |
|
|
Skil 010-369-SKL 8-in-1 Palm Driver Set $11.99 8-in-1 Palm Driver. 70mm Magnetic Bit Extension. (3) 25mm Phillips Bits: PH0, PH1, PH2. (3) 25mm Slotted Bits: 5/32-in, 3/16-in, 1/4-in. (2) 25mm Torx Bits: T10, T15 |
|
|
ATD Tools ATD340 8Piece PickHook and Driver Set $23.84 ATD340. 8Piece Pick Hook Driver SetHigh quality chrome vanadium steel with comfort grip handleIncludes (1) of each:Straight Pick90#730; HookFull HookOffset 45#730; Hook1/8 Slotted Screwdriver0# Phillips ScrewdriverT15 Torxreg; DriverT20 Torxreg; Driver |
|
|
Jeep Brake Rotors: Slotted Jeep Brake Rotor by Power Slot $76.99 2008 to 2012 Liberty;Power slot premium slotted rotor;11.89 in. diameter;5 lug;Driver side JEEP LIBERTY (KJ) LIMITED RENEGADE SPORT 2008 2009 2010 2011 3.7L Power-Tech (226) GAS Jeep Brake Rotors: Slotted Jeep Brake Rotor by Power Slot |
|
|
Driver $7.99 Anita Phillips Driver - Art Print |
|
|
SG Tool Aid SGT14950 Impact Driver Set $37.18 Features and Benefits: Use to loosen and tighten screws nuts and bolts Includes 3/8 square x 5/16 hex bit holder Driver is easily reversible for tightening applications Special handle reduces risk of injury when striking driver with hammer Set includes eight standard and long length interchangeable bitsSizes include: #2 Phillips 13/8 long 5/16 hex bit; #3 Phillips 13/8 long 5/16 hex bit; 5/16 slotted 13/8 long 5/16 hex bit; 3/8 slotted 13/8 long 5/16 hex bit; #2 Phillips 31/8 long 5/16 hex bit; #3 Phillips 31/8 long 5/16 hex bit; 5/16 slotted 31/8 long 5/16 hex bit; 3/8 slotted 31/8 long 5/16 hex bit. |
|
|
SYBA Multimedia SY-ACC65035 Bit Driver $18.99 3" Height x 8" Width x 6" Depth 9 oz Slotted Bits: SL4.5, SL5.5, SL6.5mm Philips Bits: PH1, PH2, PH3 Pozi Bits: PZ1, PZ2, PZ3 Star with tamper-proof: T9H, T10H, T15H, T20H Hex: H3 1/4" Ratchet T-Bar Bit Driver SY-ACC65035 SY-ACC65035 1/4" T-Bar with Bit Set SYBA Multimedia SYBA Multimedia, Inc www.syba.com |
|
|
Makita MAK784811A Bit Driver / Finder $23.65 Bit Driver/Finder. Dimensions: 0.6 H x 3.5 W x 7.6 D. Good control when starting screws. Retracting screw holder. For access into tight working areas. Quantity: 3 Per Pack. Tip Type: Phillips. Includes: 1 2 Phillips Bit 1 68 Slotted Bit. Drive Type: Hex. Overall Length: 31/8 . Tip Size Symbol Nom: 2. Tip Size Symbol Min: 6f8r. |
|
|
Skil 011-004-SKL Flex Driver Set $5.99 Pivot Head Stubby Screwdriver. Dual-Sided 1/4-in/PH2 Bit. (3) Phillips Bits: PH0, PH1, PH2. (3) Slotted Bits: 5/32-in, 3/16-in, 1/4-in |