Sae Inch Deep

Sae Inch Deep

Ford Windsor engine - Rear Projection Bulb - China Bare Projector Lamps

Overview

The small block Ford engine uses a thin-wall cast iron block with a separate timing chain cover, made from aluminum. This feature differentiates it from later Cleveland, or 335-series engines, that use an integrated timing cover, cast in the block. All Windsors use 2-valve per cylinder heads regardless of whether they are "2V", "4V", or fuel-injected models. The 2V & 4V designations referred to the number of venturi (or barrels) in the carburetor, not the number of valves per cylinder. The valves are in-line and use straight 6-bolt valve covers.

Another simple differentiation between the Small Block and "335" Cleveland series is the location of the radiator hose the Windsor routed coolant through the intake manifold, with the hose protruding horizontally, while the Cleveland had the radiator hose connecting vertically to the engine block. The Cleveland and later "Modified" engines used a canted valve design, allowing for larger valves within the same 4" bore. Something worth noting was the fact that the Ford Engineers designed the Cleveland heads with the same bore spacing and head bolt configuration making it possible (with some light machine work) to bolt Cleveland heads to the Windsor block and in 1969 they did just that creating the Boss 302.

The oil routing in the engine block is unique in that a third passage is drilled parallel to the tappet passages. This passage ensures that oil reaches the main and cam bearings before the tappets, reducing the likelihood of lubricant starvation of the bearings (unlike the 351 Cleveland and the 385 series). The tappets are fed from an inverted 'V' passage cast in the rear under the intake manifold that connects with this passage and is sealed with a steel cap. The third oil passage is visible from the rear of the block with the transmission components removed. It is under and slightly right of the right bank tappet passage. The tappets on the left bank are the farthest from the oil pump and are last to be pressurized by oil upon a dry start. This gives an impression that there is insufficient lubrication, but this is normal and the noise ceases after several seconds of operation.

With the exception of the 289 HiPo, Boss 302 and 351W, all connecting rods use the same 5/16 in. dia. bolts. The rod forgings had undergone some changes throughout its history. The 221, 260 and early 289 (C2OZ-A and C3AE-D) rods used an oil squirt hole to lubricate the piston pin and rings. The oil squirt hole was discontinued in 1964. The same forging continued to be used up to 1967 and all were the same length (5.155 in.). The 302 used a shorter beam (C8OE-A 5.090 in.) but used the same cap up to 1970. In 1971 the cap design was changed from flanged to flat (D1OE-A). This was changed back to the flange design in 1988 due to fatigue failures from increased power output of fuel injection and continued until the end of production. The 289 HiPo and Boss 302 were the same length (5.155 in) used heavier beam and cap forgings and 3/8 in bolts but were machined differently. The former used square head bolts and square cut and the latter were spot faced for 'football head' bolts.

221

The first engine of this family, introduced for the 1962 model year as an option on the Ford Fairlane and Mercury Meteor, had a displacement of 221 cu in (3.6 L), from a 3.5 in (89 mm) bore and 2.87 in (72.9 mm) stroke, with wedge combustion chambers for excellent breathing. An advanced, compact, thinwall-casting design, it was 24 in wide, 29 in long, and 27.5 in tall (610 mm 737 mm 699 mm). It weighed only 470 lb (210 kg) dry despite its cast iron construction, making it one of the lightest and most compact V8 engines of its day.

In stock form it used a two-barrel carburetor and a compression ratio of 8.7:1, allowing the use of regular (rather than premium) gasoline. Valve diameters were 1.59 in (40.4 mm) (intake) and 1.388 in (35.3 mm) (exhaust). Rated power and torque (SAE gross) were 145 hp (108 kW) @ 4400 rpm and 216 lbft (293 Nm) @ 2200 rpm.

The 221 was dropped after the 1963 model year.

260

The second version of the Windsor, introduced during the middle of the 1962 model year, had a wider bore of 3.80 in (96.5 mm), increasing displacement to 260 cu in (4.3 L). Compression ratio was raised fractionally to 8.8:1. The engine was slightly heavier than the 221, at 482 lb (219 kg). Rated power (still SAE gross) rose to 164 hp (122 kW) @ 4400 rpm, with a peak torque of 258 lbft (350 Nm) @ 2200 rpm.

In 1962 and 1963 valve diameters remained the same as the 221, but starting in 1964 they were enlarged to 1.67 in. (42.4 mm) (intake) and 1.45 in (36.8 mm) (exhaust). Rated power was not changed.

In 1963 the 260 became the base engine on full-size Ford sedans. Later in the model year its availability was expanded to the Ford Falcon and Mercury Comet. The early "1964" Ford Mustang also offered the 260, although it was dropped by mid-year, as did the 1964-1966 Sunbeam Tiger Mk I. The 1967 Sunbeam Tiger Mk II used the 289 CID V8 (see 289).

The special rally version of the Falcon and Comet and early AC Cobra sports cars used a high-performance version of the 260 with higher compression, hotter camshaft timing, and a four-barrel carburetor. This engine was rated (SAE gross) 260 hp (194 kW) @ 5800 rpm and 269 lbft (365 Nm) @ 4800 rpm.

Ford dropped the 260 after the 1964 model year.

289

289 Windsor V8 in a 1965 Ford Mustang

The 289 cu in (4.7 L) Windsor was also introduced in 1963. Bore was expanded to 4.0 in (102 mm), becoming the standard bore for most factory Windsor engines. The 289 weighed 506 lb (230 kg).

In 1963 the 289 was available in two forms: with a two-barrel carburetor and 8.7:1 compression, (SAE gross) rated at 195 hp (145 kW) @ 4400 rpm and 258 lbft (350 Nm) @ 2200 rpm, and with a four-barrel carburetor and 9.0:1 compression, rated at 210 hp (157 kW) @ 4400 rpm and 300 lbft (407 Nm) @ 2800 rpm. The two-barrel 289 replaced the 260 as the base V8 for full-sized Fords.

Both 1963 and 1964 versions had a five-bolt bell housing pattern that was different from later six-bolt units (Mustangs switched bolt patterns around August 3, 1964).

For 1965 the compression ratio of the base 289 was raised to 9.3:1, increasing power and torque to 200 hp (149 kW) @ 4400 rpm and 282 lbft (382 Nm) @ 2400 rpm. The four-barrel version was increased to 10.0:1 compression, and was rated at 225 hp (168 kW) @ 4800 rpm and 305 lbft (414 Nm) @ 3200 rpm.

Engine specifications were unchanged for 1966 and 1967. In 1968 the four-barrel 225 hp (168 kW) engine was dropped, leaving the two-barrel now reduced back to 195 hp (145 kW) and the HiPo. 1968 was the last year of production for the 289.

The 289 was also the engine for the first Ford Falcon GT, the XR GT. (Australia)

289 "HiPo" (K-code)

Ford 289 K-code engine in a Shelby GT 350. Note that the radiator hose connects to the intake manifold, a telltale Windsor feature.

A high-performance version of the 289 engine was introduced late in the 1963 model year as a special order for Ford Fairlanes and Mercury Comets. The engine is informally known as the "HiPo" or the K-code (after the engine letter used in the VIN of cars so equipped). Starting in June 1964, it became an option for the Mustang.

The HiPo engine was engineered to increase performance and high-RPM reliability over standard 289 fare. It had solid lifters with hotter cam timing; 10.5:1 compression; a dual point, centrifugal advance distributor; smaller combustion chamber heads with cast spring cups and screw-in studs; low restriction exhaust manifolds; and a bigger, manual choke 595 CFM carburetor (std 289 4v was 480 CFM). The water pump, fuel pump, and alternator/generator pulley were altered; fewer vanes, extra spring, and larger diameter respectively; to help handle the higher RPMs. Even the HiPo fan was unique. Bottom end improvements included thicker main bearing caps and balancer, larger diameter rod bolts, and a hardness tested and counterweighted crankshaft, all for high-rpm reliability. The HiPo carried SAE gross ratings of 271 hp (202 kW) @ 6000 rpm and 312 lbft (423 Nm) @ 3400 rpm.

The HiPo engine was used in modified form by Carroll Shelby for the 1965-1967 Shelby GT350, raising rated power to 306 hp (228 kW) @ 6000 rpm through use of special exhaust headers, an aluminum intake manifold, and a larger carburetor. The Shelby engine also had a larger oil pan with baffles to reduce oil starvation in hard cornering. Shelby also replaced the internal front press-in oil gallery plugs with a screw-in type plug to reduce chances of failure.

From 1966 to 1968, Shelby offered an optional Paxton supercharger for the 289, raising its power (on Shelby GT350s) to around 390 hp (291 kW).

The K-code HiPo engine was an expensive option and its popularity was greatly diminished after the 390 and 428 big-block engines became available in the Mustang and Fairlane lines, which offered similar power (at the expense of greater weight) for far less cost.

302

302 "4V" V8 in a 1968 Mercury Cougar

302 "Hi-Po" V8 in a 1967 Ford Mustang

Note that there was also a 302 cubic inch 335 Series engine "302 Cleveland" produced by Ford Australia for the Australian market

In 1968 the small block Ford was stroked to 3.0 in (76.2 mm), giving a total displacement of 302 CI (4.942L). The connecting rods were shortened to allow the use of the same pistons as the 289. It replaced the 289 early in the 1968 model year.

The most common form of this engine used a two-barrel carburetor, initially with 9.5:1 compression. It had hydraulic lifters and valves of 1.773 in (45 mm) (intake) and 1.442 in (36.6 mm) (exhaust), and was rated (SAE gross) at 220 hp (164 kW) @ 4600 rpm and 300 lbft (407 Nm) @ 2600 rpm. Optional was a four-barrel version rated at 250 hp (186 kW) @ 4800 rpm.

For 1968 only, a special high-performance version of the 302 was offered for the Shelby GT350[citation needed]. Its main features included an angled, high-rise aluminum or iron intake manifold, a larger Holley four-barrel carburetor, and bigger valves of 1.875 in (47.6 mm) intake and 1.6 in (41 mm) exhaust. It had a longer-duration camshaft, still with hydraulic lifters. The block was a high-strength, higher nickel content design made in Mexico. "Hecho en Mexico" casting marks are present in the lifter valley and its main strength was the appearance of much larger and stronger two-bolt main bearing caps on the engine's bottom end. The heads had special close tolerance pushrod holes to guide the pushrods without rail rocker arms or stamped steel guide plates. The combustion chambers also featured a smaller quench design for a higher compression ratio and enhanced flow characteristics. Additionally, high flow cast exhaust manifolds similar to those on the 289 HiPO K-code engine further improved output. Heavy-duty connecting rods with high strength bolts and a nodular iron crankshaft were also included in this package. Rated power (SAE gross) was estimated at 315 hp (235 kW) @ 6000 rpm and 333 lbft (451 Nm) @ 3800 rpm. The package, which cost $692 (USD) including some other equipment, was not popular and did not return for 1969. This engine was not a factory engine. Rather, like all Shelby Mustang engines, it was modified by Shelby American in their capacity as a vehicle upfitter. This special engine is well documented in the FORD factory engine repair manual for 1968 Mustangs and Fairlanes. This engine block is considered the strongest production 302 block other than the Boss 302 and the Trans Am 302. It is considered to be on par and equal in strength to the K-code HP 289 block. The heavy duty Mexican 302 block as it now known was produced for several more years and even showed up on FORD trucks and vans throughout the late 1970s and early 1980s.

Emission regulations saw a progressive reduction in compression ratio for the 302 two-barrel, to 9.0:1 in 1972, reducing SAE gross horsepower to 210 hp (157 kW). In that year U.S. automakers began to quote horsepower in SAE net ratings; the 302 two-barrel carried a net rating of 140 hp (104 kW). By 1975 its power would drop as low as 122 hp (91 kW). Not until fuel injection began to appear in the 1980s would net power ratings rise above 200 hp (149 kW).

Throttle body fuel injection first appeared for the 302 on the Lincoln Continental in 1980, and was made standard on all applications in 1983 except manual transmission equipped Mustangs and Capris, equipped first with two-barrel(1982), then later 4-barrel carburetor(1983-85) The block was fitted with revised, taller lifter bosses to accept roller lifters, and a steel camshaft in 1985, and electronic sequential fuel injection was introduced in 1986. While sequential injection was used on the Mustang since 1986, many other vehicles, including trucks continued to use a batch fire fuel injection system. The speed-density based EFI systems used a large, two-piece, cast aluminum manifold. It was fitted on all engines through 1988, after which year it was replaced by a mass-air type measuring system, with the same manifold. The MAF system continued, with minor revisions, until the retirement of the engine in 2001.

The 302 was also offered for marine applications in both standard and reverse rotation setups.

In the 1980s the 302 became more commonly known as the 5.0 Liter, although its metric displacement (4942 cc) accurately rounds to 4.9 L. It is speculated[who?] that Ford used the "5.0" moniker to distinguish the 302 from the 300 cu in inline Six, which was known as the 4.9. Despite its advertised displacement, Car and Driver referred to the 302 correctly as a 4.9 liter engine.

The 302 remained a mainstay of various Ford cars and trucks through early 2001, although it was progressively replaced by the 4.6 L Ford Modular engine starting in the early 1990s. The last 302 engine was produced for installation in a production vehicle was at Cleveland Engine Plant #1 in December 2000, as part of a build ahead to supply Ford of Australia, who installed their last such engine in a new vehicle in August 2002. The 302 is still available as a complete crate motor, from Ford Racing and Performance Parts.

Ford Australia also built some stroked, 5.7 L (~342 cu in) Windsors. With reworked GT40P heads (featuring larger valves), a unique eight trumpet inlet manifold, long throw crank, H beam rods and roller rockers. They produced 335 hp (250 kW) and 369 lbft (500 Nm).

Boss 302

Boss 302 engine

Main article: Ford Boss 302 engine

The Boss 302 was a performance variant of the Windsor, putting what would become Cleveland heads on a special, heavy duty, 4 bolt main Windsor block to improve rated power to 290 hp (216 kW). According to some reports, the canted valve, deep breathing, high revving engine could produce more than 310 hp (231 kW), although as delivered, it was equipped with an electrical rev limiter that restricted maximum engine speed to 6150 rpm. A bulletproof bottom end, thicker cylinder walls, steel screw-in freeze plugs, race prepped crank, special HD connecting rods and Cleveland style forged pistons kept the engine together at high speeds. The key to this engine's power was the large port, large valve, quench chambered, free flowing heads. The Boss 302 Mustang was offered only for the 1969 and 1970 model years.

351W

351 Windsor V8 in a 1969 Ford Mustang

The 351W is often confused with the 351 Cleveland, which is a different engine of identical displacement

The 351 cu in (5.8 L) Windsor featured a 1.3 in (32.5 mm) taller deck height, allowing a stroke of 3.5 in (88.9 mm). Although related in general configuration to the 289-302 and sharing the same bell housing, motor mounts and other small parts, the 351W had a unique, tall deck block, larger main bearing caps, thicker, longer connecting rods, and a distinct firing order (1-3-7-2-6-5-4-8 vs. 1-5-4-2-6-3-7-8), adding some 25 lb (11 kg) to the engine's dry weight. The distributor is slightly different to accommodate a larger oil pump shaft and larger oil pump. Some years had threaded dipstick tubes. It had a unique head which optimized torque over high-rpm breathing, frequently replaced by enthusiasts with aftermarket heads providing better performance. Ford offered a performance head that was a stock part on 302 equipped mid 1990's Mustangs called the GT-40 head (casting id F3ZE-AA). The early 1969 and 1970 heads had larger valves and ports for better performance. The intake valves and ports were slightly larger on the early engines. The head castings and valve head sizes from 1969 to 1976 were different, differing in passages for air injection and spark plug diameters (69-74 18 mm, 75-up 14 mm). From 1977 onward, the 351W shared the same head casting as the 302, differing only in bolt hole diameters (7/16 inch for 302, 1/2 inch for 351W). Early blocks (casting id C9OE-6015-B had enough metal on bearing saddles 2,3 and 4 for four bolt mains) as with all SBF, were superior in strength to most late model, lightweight castings. Generally the 1969 to 1974 blocks are considered to be far superior in strength than the later blocks making these early units some of the strongest and most desirable in the entire SBF engine family including the 335 series. During the 1980s a four barrel version (intake manifold casting id E6TE-9425-B) was re-introduced for use in light trucks and vans. In 1988 fuel-injection replaced the four barrel carburetor. Roller lifters were introduced in this engine in 1994.

The original connecting rod beam (forging id C9OE-A) featured drilled oil squirt bosses to lubricate the piston pin and cylinder bore and rectangular head rod bolts mounted on broached shoulders. There were a number of fatigue failures attributed to the machining of the part and so the bolt head area was spot-faced to retain metal in the critical area, requiring the use of 'football head' bolts. In 1975, The beam forging (D6OE-AA) was updated with more metal in the bolt head area. The oil squirt bosses were drilled for use in export engines, where the quality of accessible lubricants was questionable. The rod cap forging remained the same on both units (part id C9OE-A). In 1982, the design of the Essex V6 engine used a new version of the 351W connecting rod (E2AE-A), the difference between the two parts was that the V6 and V8 units was machined in metric and SAE units respectively. The cap featured a longer boss for balancing than the original design.

The block underwent some changes since its inception. In 1971, The deck height was extended from 9.480 in. to 9.503 in. (casting id D1AE-6015-DA) to lower the compression ratio to reduce NOx emissions without the need to change piston or cylinder head design. In 1974 a boss was added on the front of the right cylinder bank to mount the air injection pump (casting id D4AE-A). In 1974 the oil dipstick tube moved from the timing case to the skirt under the left cylinder bank near the rear of the casting. These details made swapping older blocks from passenger cars with front sump oil pans to more recent rear-sumped Mustang and LTD/Crown Vic Ford cars more difficult unless an oil pan had the dipstick mounted therein. In the 1990s the rear main seal was changed from a two-piece component to a one-piece design and provisions for roller tappets were also added.

Introduced in 1969, it was initially rated (SAE gross) at 250 hp (186 kW) with a two-barrel carburetor or 290 hp (216 kW) with a four-barrel. When Ford switched to net power ratings in 1972 it was rated at 153 to 161 hp (114 to 120 kW), although actual, installed horsepower was only fractionally lower than in 1971.

During the 1990s, motor enthusiasts were modifying 351 Cleveland 2V cylinder heads (by re-routing coolant exit from the block surfaces to the intake manifold surfaces) for use in the 351W resulting in the Clevor (a portmanteau of Cleveland and Windsor). This modification requires the use of custom pistons by reason of differing combustion chamber terrain (canted valves vs. straight valves) and intake manifolds for the Boss 302 was not wide enough and the intake ports were too large. This combination yielded the horsepower potential of the 351C with the ruggedness of the 351W small block. This was possible because more 351C 2V cylinder heads were made than corresponding engine blocks (the 351M and 400 used the same head as the 351C 2V).

Boss 351

Main article: Ford Boss 351 engine

It is a crate engine version from Ford Racing.

255

In 1980, a very urgent need to meet EPA CAFE standards led to the creation of the 255 cu in (4.2 L) version, essentially a 302 with the cylinder bores downcored to 3.68 in (93.5 mm). Rated power (SAE net) was 115-122 hp (86-91 kW), depending on year and application. Cylinder heads used smaller combustion chambers and smaller valves and the intake ports were ovals whereas the others were rectangular. The only externally visible cue was the use of an open runner intake manifold with a stamped steel lifter valley cover attached to its underside, giving the appearance of previous generation engines, such as the Y-Block and the MEL. It was optional in Fox chassis cars including the Mustang and corporate cousin Mercury Capri, Thunderbird, Fairmont, and standard equipment in the Ford LTD. Poorly received thanks to its dismal performance and mediocre fuel economy, it was dropped after the 1982 model year, and is considered one of the worst modern Ford engines.

See also

List of Ford engines

References

^ http://www.fpv.com.au/theheritage/falcon/2001auiiite50andts50.aspx

External links

foxbodychallenge.com - Website & database dedicated Ford Mustang & the 302ho

302w.com - Website & Forums dedicated to the Ford Windsor 302 Engine

Short descriptions of Ford overhead valve V8 engines

Pirates Of Horsepower - blog on building a 351w Ford stroker

v  d  e

Ford Motor Company engine timeline, North American market, 1950s1970s Next

Type

1950s

1960s

1970s

0

1

2

3

4

5

6

7

8

9

0

1

2

3

4

5

6

7

8

9

0

1

2

3

4

5

6

7

8

9

Flathead

Flathead V8

Small Block

Y-block V8

Windsor V8

Medium Block V8

Lincoln Y-block

335/Cleveland V8

335/Modified V8

Big Block

MEL V8

FE V8

385 V8

v  d  e

Previous Ford Motor Company engine timeline, North American market, 1980s2010s

Type

1980s

1990s

2000s

2010s

0

1

2

3

4

5

6

7

8

9

0

1

2

3

4

5

6

7

8

9

0

1

2

3

4

5

6

7

8

9

0

Small Block

Windsor V8

Medium Block V8

335/Modified V8

Big Block

385 V8

Modular V8

Boss V8

Categories: History of Windsor, Ontario | Ford enginesHidden categories: Articles lacking sources from February 2008 | All articles lacking sources | Articles that may contain original research from August 2008 | Articles needing cleanup from February 2008 | All pages needing cleanup | All articles with unsourced statements | Articles with unsourced statements from June 2008 | All articles with specifically-marked weasel-worded phrases | Articles with specifically-marked weasel-worded phrases from February 2009

About the Author

The e-commerce company in China offers quality products such as Rear Projection Bulb , China Bare Projector Lamps, and more. For more , please visit projector lamps today!

KD Tools KDT80563 11 Piece 0.33 Inch Drive 12 Point Deep Sae Socket Set $82.7 11Piece 3/8Inch Dr. 12Point Deep SAE Socket Set. Includes the following part numbers:. 1/4 12 Pt. Deep SAE Socket 3/8 Dr. 5/16 12 Pt. Deep SAE Socket 3/8 Dr. 3/8 12 Pt. Deep SAE Socket 3/8 Dr. 7/16 12 Pt. Deep SAE Socket 3/8 Dr. 1/2 12 Pt. Deep SAE Socket 3/8 Dr. 9/16 12 Pt. Deep SAE Socket 3/8 Dr. 5/8 12 Pt. Deep SAE Socket 3/8 Dr. 11/16 12 Pt. Deep SAE Socket 3/8 Dr. 3/4 12 Pt. Deep SAE Socket 3/8 Dr. 13/16 12 Pt. Deep SAE Socket 3/8 Dr. 7/8 12 Pt. Deep SAE Socket 3/8 Dr.

KD Tools KDT80707 23 Piece 0.25 Inch Drive Sae Socket Set Standard And Deep $148.67 23Piece 1/2Inch Drive Standard And Deep SAE Socket Set. Includes the following part numbers:. 6 Pt. Deep Socket SAE 1/2 . 9/16 6 Pt. Deep Socket SAE. 5/8 6 Pt. Deep Socket SAE. 11/16 6 Pt. Deep Socket SAE. 3/4 6 Pt. Deep Socket SAE. 13/16 6 Pt. Deep Socket SAE. 7/8 6 Pt. Deep Socket SAE. 7/16 12 Pt. Std. SAE Socket. 1/2 12 Pt. Std. SAE Socket. 9/16 12 Pt. Std. SAE Socket. 5/8 12 Pt. Std. SAE Socket. 11/16 12 Pt. Std. SAE Socket. 3/4 12 Pt. Std. SAE Socket. 13/16 12 Pt. Std. SAE Socket. 7/8 12 Pt. Std. SAE Socket. 15/16 12 Pt. Std. SAE Socket. 1 12 Pt. Std. SAE. 11/16 12 Pt. Std. SAE Socket. 11/8 12 Pt. Std. SAE Socket. 6 Pt. Deep Socket SAE 15/16 . Full Polish Teardrop Ratchet. 5 1/2 Drive Standard Extension. 15 1/2 Drive Standard Extension.

K Tool International KTI23200 1/2 Inch Drive 8 Piece SAE Deep Socket Set $56.88 1/2 Drive 8 Piece SAE Deep Socket Set. Includes: 1/2 9/16 5/8 11/16 3/4 13/16 7/8 and 15/16 . Packaged on a rail. Manufactured with heat treated chrome vanadium steel.

KD Tools KDT80305 10Pc .25 Inch Drive 6Pt Deep Sae Socket Set $53.27 Features and Benefits. Shallow broach to standard nut depth. Rings at base Provide quick SAE identification. Turn down at base of socket Provides grip surface to pull sockets off ratchets. Large hard stamped part number and size on both sides of socket Easier visibility to socket size. Packaged in patented slide rail for easier positioning of sockets Eliminates interference10 Piece 1/4 Drive 6 Point Deep SAE Socket Set includes: 3/16 thru 9/16 Deep Sockets packaged on a clip rail.nbsp; Entry angle guides fastener.nbsp; Serrated depth as deep as the fastener.nbsp; Large hard stamped identification.nbsp; Double line to easily identify SAE vs. metric sockets.nbsp; Made of 6130 Alloy steel and full polish nickel chrome plated.

KD Tools KDT80555 11Pc 38 Inch Drive 6Pt Deep Sae Socket Set $61.3 Features and Benefits. Shallow broach to standard nut depth. Rings at base provide quick SAE identification. Turn down at base of socket provides grip surface to pull sockets off ratchets. Large hard stamped part number and size on both sides of socket for easier visibility to socket size. Packaged in patented slide rail for easier positioning of sockets internal slide rail eliminates interference / ball bearing retention11 Piece 3/8 Drive 6 Point Deep SAE Socket Set includes: 1/4 7/8 Deep Sockets packaged on a clip rail.nbsp; Entry angle guides fastener.nbsp; Serrated depth as deep as the fastener.nbsp; Large hard stamped identification.nbsp; Double line to easily identify SAE vs. metric sockets.nbsp; Made of 6130 Alloy steel and full polish nickel chrome plated.

KD Tools KDT80705 8Pc .5 Inch Drive 6Pt Deep Sae Socket Set $89.63 Features and Benefits. Shallow broach to standard nut depth. Rings at base provide quick SAE identification. Turn down at base of socket provides grip surface to pull sockets off ratchets. Large hard stamped part number and size on both sides of socket for easier visibility to socket size. Packaged in patented slide rail for easier positioning of sockets internal slide rail eliminates interference / ball bearing retention8 Piece 1/2 Drive 6 Point Deep SAE Socket Set includes: 1/2 15/16 Deep Sockets packaged on a clip rail.nbsp; Entry angle guides fastener.nbsp; Serrated depth as deep as the fastener.nbsp; Large hard stamped identification.nbsp; Double line to easily identify SAE vs. metric sockets.nbsp; Made of 6130 Alloy steel and full polish nickel chrome plated.

Stanley 85-919 10 Piece 3/8-in Drive Deep Socket Set - SAE $18.99 5/16-in SAE Deep Socket. 3/8-in SAE Deep Socket. 7/16-in SAE Deep Socket. 1/2-in SAE Deep Socket. 9/16-in SAE Deep Socket. 5/8-in SAE Deep Socket. 11/16-in SAE Deep Socket. 3/4-in SAE Deep Socket. 13/16-in SAE Deep Socket. 7/8-in SAE Deep Socket

Sunex SUN2641 19Pc .5 Inch Drive Deep Sae Impact Socket Set $204.48 Features and Benefits:. Forged from high quality ChromeMolybdenum alloy steel for long life. Each impact socket features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners. Packaged in a durable heavy duty blow mold case for convenient storage and transport. Fully Guaranteed. This 19 piece 1/2 drive deep SAE impact socket set is designed to extend the life of fasteners Sunex Impact Sockets tackle the toughest jobs with solid durability that keeps them pounding job after job. This set includes the following deep SAE socket sizes ranging from 3/8 to 11/2 .

KD Tools KDT80325 22 Piece 1/4 Inch Drive SAE 6 and 12 Point Socket Set Shallow and Deep $54.46 Features and Benefits Features a longer full polish ratchet with low profile head for greater comfort and access 60 tooth gear system for improved productivity and strength 1/4 spinner handle for versatility and added value Turn down at base of sockets provide grip surface for easy disengagement Shallow broach allows fasteners to be held in placeDouble line beauty rings allow for easy identification of SAE sizes. Set includes: 1/4 drive 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 6 point deep SAE sockets; 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 and 1/2 12 point standard SAE sockets; 2 and 6 1/4 drive extensions; 1/4 drive spinner handle and 1/4 drive full polish teardrop ratchet. Packaged in a blow molded case with removable lid.

Grey Pneumatic GY1312D 1/2 Inch 13 Pieces Deep SAE Set $81.69 Set contains 6 point sizes: 7/16 to 11/4 . Top quality Manufactured to the highest specifications. Satisfaction ensured.

Sunex SUN4011M 11 Piece 3/4 Inch Drive Deep SAE Truck Impact Socket Set $280.01 Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius corner design to extend the life of fasteners Included in an industrial strength double latch blow mold case Fully guaranteedNo doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 3/4 deep drive SAE impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener. The following sizes are included: 8 deep sockets: 27mm 30mm 32mm 33mm 35mm 36mm 38mm 41mm; 3 Square Sockets: 17mm 20mm 21mm.

Hansen Global HNE1201 1/2 Inch Drive SAE Socket Holder $28.46 Features and Benefits: Organize your sockets for quick easy identification by size and style See which socket is missing at a glance Each post is marked for socket size Each tray holds from 26 to 34 Standard and deep sockets Made of tough ABS plastic that resists oil grease Fit most U.S. and foreign made sockets Fit most standard tool boxes Made in the U.S.A. Pictured sockets are not included; each sold SeparatelyOther Available Size Socket Holders Sold Separately: HNE1201 1/2 Dr. SAE HNE1202 1/2 Dr. Metric HNE1401 1/4 Dr. SAE HNE1402 1/4 Dr. Metric HNE3801 3/8 Dr. SAE HNE3802 3/8 Dr. MetricA

Hansen Global HNE1401 1/4 Inch Drive SAE Socket Holder $26.64 Features and Benefits: Organize your sockets for quick easy identification by size and style See which socket is missing at a glance Each post is marked for socket size Each tray holds from 26 to 34 Standard and deep sockets Made of tough ABS plastic that resists oil grease Fit most U.S. and foreign made sockets Fit most standard tool boxes Made in the U.S.A. Pictured sockets are not included; each sold separatelyOther Available Size Socket Holders Sold Separately: HNE1201 1/2 Dr. SAE HNE1202 1/2 Dr. Metric HNE1401 1/4 Dr. SAE HNE1402 1/4 Dr. Metric HNE3801 3/8 Dr. SAE HNE3802 3/8 Dr. MetricA

Hansen Global HNE3801 3/8 Inch Drive SAE Socket Holder $26.64 Features and Benefits: Organize your sockets for quick easy identification by size and style See which socket is missing at a glance Each post is marked for socket size Each tray holds from 26 to 34 Standard and deep sockets Made of tough ABS plastic that resists oil grease Fit most U.S. and foreign made sockets Fit most standard tool boxes Made in the U.S.A. Pictured sockets are not included; each sold separatelyOther Available Size Socket Holders Sold Separately: HNE1201 1/2 Dr. SAE HNE1202 1/2 Dr. Metric HNE1401 1/4 Dr. SAE HNE1402 1/4 Dr. Metric HNE3801 3/8 Dr. SAE HNE3802 3/8 Dr. MetricA

Sunex SUN2659 9 Piece 1/2 Inch Drive Universal Deep SAE Impact Socket Set $175.48 Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius corner design to extend the life of fasteners Sockets are included in a heavyduty blow molded case Fully guaranteedThere s no doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 9 piece universal deep SAE impact socket set has a 1/2 drive. It s designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also it features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener. The set includes the following sizes: 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 and 5/16

Blackhawk 5781226NB Set Skt 26 Pc 12 Inch Dr 6Pt Std Deep Sae $165.9 Drive Size: 1/2 in. No. of Points: 6 12. Includes: (9) 6 Pt. Deep Sockets 1/2 1 in (13) 12 Pt. Std. Sockets 7/16 11/4 in Round Head Ratchet 6 in. Extension Universal Joint 18 in. Flex Handle Case. Measuring System: Inch. Height: 3 in. Length: 18.900 in. Width: 10.700 in.

Sunex Tools 1874 74 Piece 1/4 Inch Drive Master Sae and Metric Socket Set $348.65 10 SAE Standard: 3/16 thru 9/16 .10 SAE Deep: 3/16 thru 9/16 .14 Metric Standard: 4 thru 15mm.11 Metric Deep: 5.5 thru 15mm.6 SAE Universal: 1/4 thru 9/16 .12 Metric Universal: 5 thru 15mm.6 Internal Star Sockets: T10 thru T30.1/4 Drive Universal Impact Joint.1/4 Drive 1/4 female x 3/8 male Adapter.3 Piece 1/4 Drive Extension: 2 4 6 .

Blackhawk 5783820NB 20 Piece 38 Inch Drive Socket Set 6 Pt. Deep Sae $109.08 Drive Size: 3/8 in. No. of Points: 6. Includes: (8) Deep Sockets 3/8 13/16 in (9) Std. Sockets 3/8 7/8 in 3 and 6 in. Extensions Case Reversible Ratchet.

Sunex SUN3360DD 28 Piece 3/8 Inch Drive Master Deep Metric/SAE Impact Socket Set $124.59 Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius corner design to extend the life of fasteners Included in a heavy duty molded case Fully guaranteedIncludes sizes: 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 Deep 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 21mm and 22mm Deep; 3 Extension and 1/2 Female x 3/8 Male Adapter.

Sunex SUN5153DD 29 Piece 1/2 Inch Drive 6 Point SAE and Metric Deep Impact Socket Set $168.94 Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius corner design to extend the life of fasteners Ideal for working in tight areas Included in a heavy duty blow molded case Fully guaranteedNo doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/2 drive 6 point deep impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener. Set includes: 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 11/16 11/8 and 11/4 deep sockets; 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 21mm 22mm 26mm and 27mm sockets; and 2 deep flip sockets: 3/4 x 13/16 and 19mm x 21mm.

Sunex SUN4695 29Pc 34 Inch Dr Sae Deep Impact Socket Set $798.53 Features and Benefits . Made from impact grade chrome molybdenum alloy steel. Fully guaranteed. Includes heavy duty blow molded case over 30 tall . Includes wheel kit and grip handle for easy maneuvering Because of the extended size range of this set and the deep length of the industrial grade CrMo steel this set is extremely heavy; thus we have added a wheel kit for added convenience that enables the user to pull the set behind them to the desired workspace. All sockets in this set are fully guaranteed. 6 point deep socket sizes include: 3/4 13/16 7/8 15/16 1 11/16 11/8 13/16 11/4 15/16 13/8 17/16 11/2 19/16 15/8 111/16 13/4 113/16 17/8 115/16 nbsp; 2 21/16 21/8 23/16 21/4 25/16 23/8 27/16 and 21/2 .

Sae-Tcadapter - 1/4 inch Sae-Tc Adapter $41.86 [07700006903] UPC: 098268059977 1/4 - 7/16 inch 0.14 LB

Sunex SUN2668 39 Piece 1/2 Inch Drive 6 Point Standard and Deep SAE Impact Socket Set $246.6 Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius corner design to extend the life of fasteners Included in a heavy duty blow molded case Fully guaranteedNo doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/2 drive 6 point standard and deep impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener. Set includes: 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 11/16 11/8 13/16 11/4 15/16 13/8 17/16 and 11/2 standard sockets; 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 11/16 11/8 13/16 11/4 15/16 13/8 17/16 and 11/2 deep sockets; and a universal joint.

SUNEX TOOLS 2668 39 Piece .5 Inch Drive Deep And Shallow Sae Impact Socket Set $236.81 CRMO alloy steel for long life housed in a heavy duty blow mold case. Deep Well Socket Sizes are: 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2. Standard Socket Sizes are: 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2.

Sunex SUN3656 7 Piece 3/8 Inch Drive Deep SAE Universal Impact Socket Set $103.53 Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius corner design to extend the life of fasteners Included in a heavy molded storage tray Fully guaranteedNo doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 3/8 deep drive universal impact socket is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener. Sizes Included: 3/8 7/16 1/2 9/16 5/8 11/16 and 3/4 .

Sunex SUN2670 15 Piece 1/2 Inch Drive 12 Point Deep SAE Impact Socket Set $136.28 Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius corner design to extend the life of fasteners Ideal for working in tight areas Included in a heavy duty blow molded case Fully guaranteedNo doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/2 drive 12 point deep impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener. Set includes: 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 21mm 22mm and 24mm sockets.

Sunex SUN4685 17 Pc 34 Inch Dr Sae Deep Impact Socket Set $512.48 Features and Benefits:. Forged from the finest chrome molybdenum alloy steel ndash; the best choice for strength and durability. Fully guaranteed. Included in a heavyduty blow mold caseNo doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around.nbsp; This 3/4rdquo; deep drive impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job.nbsp; Also each socket features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener.nbsp; This set includes: 1 11/16 11/8 13/16 11/4 15/16 13/8 17/16 11/2 19/16 15/8 111/16 13/4 113/16 17/8 115/16 and 2 .

Sunex SUN2848 8 Piece 1/2 Inch Drive 6 Point Extra Deep SAE Impact Socket Set $195.49 Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius corner design to extend the life of fasteners Ideal for working in tight areas Included in a heavy duty blow molded case Fully guaranteedNo doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/2 drive 6 point extra deep impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener. Set includes: 1/2 9/16 5/8 11/16 3/4 13/16 7/8 and 15/16 .

Sunex SUN2845 5 Piece 1/2 Inch Drive 6 Point Extra Deep SAE Impact Socket Set $171.99 Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius corner design to extend the life of fasteners Ideal for working in tight areas Included in a heavy duty blow molded case Fully guaranteedNo doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/2 drive 6 point extra deep impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener. Set includes: 1 11/16 11/8 11/4 and 15/16 .

Sunex SUN3680 12 Piece 3/8 Inch Drive 12 Point SAE Deep Impact Socket Set $71.94 Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius corner designto extend the life of the fastener Ideal for working in tight areas Included in a heavy duty blow molded case Fully guaranteedNo doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 3/8 deep drive 12 point impact socket set designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener. This set includes the following sizes: 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 and 1 .

Sunex SUN2651 13 Piece 1/2 Inch Drive 6 Point Deep SAE Socket Impact Set $87.22 Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius corner design to extend the life of fasteners Included in a heavy molded storage tray Fully guaranteedNo doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/2 drive 6 point deep impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener. Set includes: 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 11/16 11/8 and 11/4 sockets.

Sunex SUN4681 8 Piece 3/4 Inch Drive 6 Point Deep SAE Impact Socket Set $122.83 Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius corner design to extend the life of fasteners Comes in a industrial strength double latch blow molded case Fully guaranteedNo doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 3/4 drive 6 point deep impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener. This set includes the following sizes: 1 11/16 11/8 11/4 15/16 13/8 17/16 and 11/2 .

Sunex SUN3361 12 Piece 3/8 Inch Drive 6 Point Deep SAE Socket Impact Socket Set $66.51 Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius corner design to extend the life of fasteners Included in a heavy molded storage tray Fully guaranteedNo doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 3/8 deep drive 6 point impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also each socket features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener. The following sizes included: 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 and 1

Sunex SUN5681 8 Piece 1 Inch Drive 6 Point Deep SAE Impact Socket Set $177.94 Features and Benefits: Chrome molybdenum alloy steel for long life Designed with radius corners this allows it to grab the sturdy wall of the fastener instead of grabbing the corners Industrial strength double latch blow mold case Fully guaranteedNo doubt Sunex Tools offers one of the most complete and toughest Impact Socket lines around. This 8 piece 1 drive deep impact socket set tackles the toughest jobs with solid durability that keeps them pounding job after job. The design results in less corner wear on the fastener. All are forged from the finest chrome molybdenum alloy steel the best choice for strength and durability. The following sizes are included: 7/8 15/16 1 11/16 11/8 13/16 11/4 and 11/2 .

Sunex SUN1811 10 Piece 1/4 Inch Drive Deep SAE Impact Socket Set $46.61 Features and Benefits: Forged from the finest chrome molybdenum alloy steel the best choice for strength and durability Radius corner design to extend the life of fasteners Comes in a heavy molded storage tray Fully guaranteedNo doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/4 deep drive socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also this set features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener. Included in this set are the following sizes: 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 and 9/16 .

Sunex SUN5693 21 Pc 1 Inch Dr Sae Deep Impact Socket Set $696.74 Features and Benefits:. Forged from the finest chrome molybdenum alloy steel ndash; the best choice for strength and durability. Fully guaranteed. Included in a heavyduty blow mold case over 30 tall. Includes wheel kit and grip handle for easy maneuveringNo doubt Sunex tools offer one of the most complete and toughest Impact Socket lines around.nbsp; This 1rdquo;nbsp; drive deep impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job.nbsp; Also each socket features a radius corner design causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners resulting in less wear on the fastener.nbsp; This set includes: 3/4 13/16 7/8 15/16 1 11/16 11/8 13/16 11/4 15/16 13/8 17/16 11/2 19/16 15/8 111/16 13/4 113/16 17/8 115/16 and 2 .

KD Tools KDT80700 49 Piece 1/2 Inch Drive 6 Point SAE / Metric Socket Set $280.78 Features and Benefits Features longer pattern 91/2 inch ratchet handle for added leverage Ratchet features low profile head for greater access Ratchet features flush mounted reversing lever for greater access Full range of 1/2 drive sockets complete coverage with no missing sizes Includes 1/2 Universal Joint for added value49 Piece 1/2 Drive 6 Point SAE/Metric Socket Set includes 7/16 11/8 standard sockets; 1/2 15/16 deep sockets; 10 24mm standard sockets; 10 19mm deep sockets; 1/2 Full Polish Teardrop Ratchet 3 and 5 Extensions and Universal Joint packaged in a blow mold case. Entry angle guides fastener. Serrated depth as deep as the fastener. Large hard stamped identification. Double line (SAE) and knurled line (Metric) to easily identify SAE vs. metric sockets. Made of 6130 Alloy steel and full polish nickel chrome plated.

KD Tools KDT80303 10 Piece 1/4 Inch Drive 6 Point SAE Socket Set $35.74 Features and Benefits Shallow broach to standard nut depth Rings at base provide quick SAE identification Turn down at base of socket provides grip surface to pull sockets off ratchets Large hard stamped part number and size on both sides of socket for easier visibility to socket size Packaged in patented slide rail for easier positioning of sockets internal slide rail eliminates interference / ball bearing retention10 Piece 1/4 Drive 6 Point SAE Socket Set includes 3/16 9/16 Standard Sockets on a clip rail. Entry angle guides fastener. Serrated depth as deep as the fastener. Large hard stamped identification. Double line to easily identify SAE vs. metric sockets. Made of 6130 Alloy steel and full polish nickel chrome plated.

KD Tools KDT80703 11Pc .5 Inch Drive 6Pt Standard Sae Socket Set $78.24 Features and Benefits. Rings at base provide quick SAE identification. Large hard stamped part number and size on both sides of socket for easier visibility to socket size. Packaged in patented slide rail for easier positioning of sockets internal slide rail eliminates interference / ball bearing retention. Entry angle guides fastener. Turn down at base of socket provides grip surface to pull sockets off ratchets11 Piece 1/2 Drive 6 Point Standard SAE Socket Set includes: 1/2 through 11/8 Standard Sockets packaged on a clip rail.nbsp; Entry angle guides fastener.nbsp; Serrated depth as deep as the fastener.nbsp; Large hard stamped identification.nbsp; Double line to easily identify SAE vs. metric sockets.nbsp; Made of 6130 Alloy steel and full polish nickel chrome plated.

KD Tools KDT80553 13Pc 38 Inch Drive 6Pt Standard Sae Socket Set $55.24 Features and Benefits. Rings at base provide quick SAE identification. Large hard stamped part number and size on both sides of socket for easier visibility to socket size. Packaged in patented slide rail for easier positioning of sockets internal slide rail eliminates interference / ball bearing retention. Entry angle guides fastener. Turn down at base of socket provides grip surface to pull sockets off ratchets13 Piece 3/8 Drive 6 Point Standard SAE Socket Set includes 1/4 1 Standard Sockets packaged on a clip rail.nbsp; Entry angle guides fastener.nbsp; Serrated depth as deep as the fastener.nbsp; Large hard stamped identification.nbsp; Double line to easily identify SAE vs. metric sockets.nbsp; Made of 6130 Alloy steel and full polish nickel chrome plated.