Regulator Lubricator Air
Regulator Lubricator Air
 |
US $54.99
Air Polution Riding Wave of Technological Change
1.0 Introduction
The search for a better managed human society and what brought human today threshold of civilization is as whole as man himself. The triple bottom factors of quest for knowledge, the need for production exchange, organizing power of social community – these factors have equally become interrelated and self reinforcing with each advanced technology and organization, scale, trio of energy, economy and environment and matter remaining keys to human civilization; followed by invention of language or ability to communicate, and facilitation of his mobility. All of which went through their course slowly through building stones out of stumbling blocks and some actually amazingly came out through extraordinary revolution. Likewise, all this dynamic changes through differential approach and methods which can be categorized as conventional methods of idea, hypothesis, experimentation and observation.
Over the years, time needs, growth, speed, and knowledge and of course scarcity and competition have created demand that necessitated man to build complex institution- all of which require energy to move them. Likewise vast range human development has flown precise measurement of energy and manipulation of delineated discrete object all which has no doubt reduce the crushing boarding of physical work and freed man for other pursuit. Today pollution from energy carry a very large percentage and as the carbon release has exhaust the little oxygen we are sharing and the ozone later that is protecting us from mother naturedue to lack of cogent risk assessment on systems we have been building. More so, because conventional assessment focus more on economics while environment and its associated cycle is put in oblivion, probably because of difficulties associated with uncertainties. For years many think that everything that run air is infinite, the atmosphere and the ocean is providing us source of freshening, winds and current are far more vulnerable to polluting activities that have run off into them too many poisons that the air and the ocean may cease to serve more purpose if care is not taking to prevent pollution. To this end the challenge of air emission is recognized to:
- Be main inherent consequence of powered shipping
- Have link to fuel oil burning as main source
- Have links with continuous combustion machineries - boilers, gas turbines and incinerators
This paper will discuss how the challenge climate change, ozone depletion , global warming touched engineering including engineering requirement of ship operation and the impacts of emission from ship, rising egalitarian techno economic and environmental sustainable abatement method to reduce and control emission. As well as matching development and improvement necessary for energy efficiency and performance of new propulsion system ( all electric ship for short sea shipping and hybrid gas electric system for high sea shipping) through comparison and simulation of extreme conditions.
2.0 Emission Ride on Ship Technology
This issue of environment become so sensitive recently with respect to infrastructure development and most especially in everything we use energy for because most of the past polluting activities has turned into poison through point form effect and are presently having advert effect on our in quality of air and water. In a nutshell, the three worlds we live are currently are out of balance and in potential conflict and man is in the middle. Historical records of number of calamity that has resulted to heavy lost and pollution are calling for news and philosophy of doing things through assessment of economics and environmental issue relating to energy, without compromising to the later has a lot of case have been based. This is already equally calling for a number of regulations, that will subsequently affect, policies change and procedures relating to the above and their effect to design of new systems and modification of existing one.
In regards to energy, It all started with environment natural source of energy,-animal, windmill, watermill, then steam, electricity and nuclear, with so much water and wind and even the sun all of which are the primary source of energy that goes through natural circle to support human life and the planet, the remain the leanest inherited resources, new technology has not turn this vast potential income into usable supplies- for years the
Figure 1. - Global warming potential
Cleanest and the safest are among the inexhaustible, the use of energy is likened to reckless try and error, experimentation, and age that discover the big gap between renewable and non renewable energy, and how human have adventurism has lead to replacing renewable natural given of nature by non renewable and associated backlash has called for new ways to do things and importance of using advantage of nature and its given. Renewable source of energy range from energy from the sun, hydrogen and biomass- as for the later, using waste to produce biomass is very. reasonable than growing crops that suppose to be used for food to produce energy or else we end up breaking the food chain and when scarcity of products involve come we all have to pay for it anyway. I am not going to discuss much about renewable source of energy or green house gas today. Land based technology will required to be transfer sympathetically to the marine industry via availability of engines, systems and technical assistance. Marine craft operation in inland water operation requires fuel supplied in bulk rendering the NG distribution viable. The use of an alternative fuel for vessel propulsion will leads to a design review of Power plant, associated fuel system and propulsion train; effectively reshaping areas such as Machinery Arrangement, Hull Form, Compartmentation, Cargo Deck, Payloads, Superstructure, Interior Layouts, Escape & Safety, Route Options, etc.
Recent environmental revolt from critical like issue of sea level rise, flooding, has brought awareness regarding system failure and reality of uncertainty and point form environmental degradation, which further show that the two world are currently out of balance and in potential conflict and human is in the middle. This call for new philosophy to design system based on risk and goal based holistic sensitivity. Since, it has become obvious that, everything we use on land end their way to the rivers through ground water which then end up to the sea, this make management of water quality, maintaining balance of its purity and preventing substance running into it is a crucial point in protecting the total environment as a result of this International environmental get serious and encourage and call for Galvanize the scientific community by set up panel's /collaborating scientists and technical bodies and encourage use existing scientific bodies and research centers for global observation systems that include taping informal sources of information related to early warning and dealing with problem of sharing sensitive data among countries as well using human capacity and rapid spread of Internet as a tool for information compilation, discussion, and dissemination. Some of the land base regulation that are passed are :
• (Oil Spills Protocol) - Protocol Concerning Specially Protected Areas and Wildlife (SPAW Protocol)
• Protocol Concerning Pollution from Land-based Sources and Activities (LBS Protocol)
• Agenda 21
• To address greenhouse gas emissions from ships- Adoption of control and prevention measures in 2003, as well as problems associated with the transfer of harmful aquatic organisms in ships' ballast water – adoption convention in 2004 to support the International Convention on the Control of Harmful Anti-fouling Systems in Ships 2001; and the diplomatic conference also address implementation of the International Convention on Oil Pollution Preparedness, Response and Co-operation 1990.
• IMO also get serious and passed MARPOL annex six under a diplomatic confernec and bypassing the usual taxcit procedure . MARPOL cover: Annex I- Oil ,Annex II- Noxious liquid chemicals ,Annex III- Harmful Goods (package), Annex IV- Sewage, Annex V – Ballast water whereby Annex VI- emission and air pollution (SOx, NOx and green house gas, emission of ozone depletion gas (ODG))
Figure 2 – Emission from marine engine - ABS
New annex VI to MARPOL focus on :
• Control and management of Ballast water to minimize transfer of harmful foreign species
• Global prohibition of TBT in antifouling Coating - phase out scheduled for 2008
• International convention on oil pollution, Response and cooperation (OPRC) - 1990
• Policy to combating major incidents or threats , control to prevent, mitigates or eliminates danger of marine pollution through port to its coastline from a maritime casualty
• Annex protocol under this convention (HNS Protocol) covers marine pollution by hazardous and noxious substances (HNS)
Chapter III of Annex VI on the requirements for the control of emission from ships include:
Regulation 12- Ozone depletion substances
Regulation 13 – NOx
Regulation 14 -SOx
Regulation 15- Volatile Organic Compounds
Regulation 16 – Shipboard Incinerator
Regulation 17 – Reception facilities
Regulation 18 – Fuel Oil Requirement
Regulation 19 – Requirement for platform and drilling rigs
Response to air emission from ships:
• Technical code for prevention of air emissions from ships
• Diesel engine test
• Survey
• Certification of compliance (IAPPC)
• NOx compliance limit -30% reduction
• Review of 5 years interval
• Restriction on use of fluorocarbons on board
• Carbon dioxide emission from ship
• Fuel quality
• SOx Emission Control Areas (SECA)
Requirement for control of emission from ship - Other requirement and standards :
• Fuel grade - ISO 8217
• Emission test - ISO 8178
• One common limits for all engine - International harmonization of regulation and equipment standards
Thus IMO and the shipping industry got the greatest credit today regarding the way we design and operate , but nonetheless, the value of water and the environment will operate will always require vivid demand for near zero intolerance to discharge or emission Regulation of maritime business and operations has for many year centralized focused philosophy of safer sea and cleaner ocean, however since the protection of marine environment became important international issues pollution of the world ocean augmented to linchpin of international legislation and this is calling all areas of human endeavor to move towards sustainable development. Thus, pollution from shipping only contribute10% of all discharge. Years of marine operation paid little attention to air pollution, IMO declaration for duction under new annex IV MARPOL change this. NOx is given limit of 30% reduction , and sulfur capping of 0.5-5.0% limit, Emissions from ocean-going are forecast to increase 9% to 13% by 2010 and 20% to 29% by 2020, above levels in 2002. Bulk carrier, container and tanker vessels are the three largest contributors.
(Fleisher, 1996).
Overall energy efficiency should ideally be defined as useful work done in relation to the energy consumption. Thus the efficiency is highly dependent upon the type, size and speed of the ship. Those considerations are generally outside of the scope for this study, although mention will be made when discussing machinery systems that are especially suited for certain types of ship. The interaction of propeller, underwater hull and rudder is important when propulsion efficiency is defined as efficiency in conversion from shaft power to thrust power, this is outside of our scope, consequently under power transmission the study will refer to free running (open water) efficiency of propellers when necessary.
.Study conducted by ABS concluded on the following configuration propulsion configurations as best practice hybrid option for large LNG carrier is given below:
Table1 – current propulsion configuration- source ABS
Slow Speed Engine
Direct drive
Medium Speed Engine
Reduction Gear
Electric Propulsion
High Speed Engine and
Reduction Gear
Gas Turbines
Electric Propulsion
Understanding the basis on which these fuel efficiencies are obtained makes it apparent that the efficiency gained over a conventionally powered vessel will vary according to environmental conditions and vessel use. Prof. Frankel paper on propulsion of LNG also supported this further comparation under emision concluded on the following data:
Table 2- Environmental comparison – Source – Prof Frankel
GTE
DFD
SSD
NOx
2
15
2
SOx
0
6
0.3
CO
0.1
0.3
0.3
CO2/100
5
4.6
4.7
Presently there is need to strengthen efficiency and effectiveness of short sea service towards sustainable distribution and intermodal link from Inland Waterways where is there is potential for future development at places where Inland Traffic originates and terminates from the waterfront.( Frankel, 2006). At a time when the pollution caused by the vehicular traffic is playing havoc with the environment, the ecofriendly mode of transport can be of some help.
Hybrid of gas turbine or Diesel with electric couple with dual fuelling that include natural gas, is explorable option for existing trans ocean vessels, while all electric ship using natural gas and microturbine generator are explorable for costal ships. While interesting development for new ship need exploration on technologies to improve integrated full electric propulsion with advanced power management systems:
- Improved converter and power electronics technology
- Improved generators and motors
3.0 Best Practice Generic Technology
Recent time have seen rapid general augmentation of awareness of environmental issues which is creating pressure of need for deeper understanding of engine propulsions system and treatment options, engine modification and new propulsion plant options. Emission restriction have long been imposed on land based power plant by authority, but the advent of green house gas has resulted to extension to marine diesel engine, especially in port and coastal traffic because ship has proved to be a significant contributors of NOx. Sequel to this IMO has passed the long standing resolution Annex IV under MEPC, for new limit to prevent air pollution at sea and coastal water. The research require urgent attention in order to be part of solution to states of the degrading ozone layers, acid rain and smog formation, water quality, detrimental effects on vegetation green house gas global warming and consequential catastrophe issues. Research conducted by Norwegian University of Technology and British Maritime Technology ltd deduced the following
Table 3 – Emission and reduction measures
category
components
sources
Current of method of reduction
Emission from air
COx
Machineries/incinerator/boiler
SOx
Machineries/incinerator/boiler
Low sulfur fuel exhaust washing
NOx
Machineries/incinerator/boiler
Exhaust cleaning, engine modification, or input media
HC
Machineries/incinerator/boiler
Noise
Machineries/cargo operations
insulation
Particles
Machineries/incinerator/boiler
HFC/Halon
Fire extinguisher / refrigeration system
Sequential loading , vapor return, recovery plant
VOC
Cargo operation
Table 4 – reduction potentials
category
components
Current reduction potentials
Emission from air
COx
1-40% operational planning and speed selection
3-7 % efficiency improvement of machineries
70-80 % ( figure uncertain) by limiting the sulfur content in the fuel and / or means of sea water washing
NOx
80-90 % by selective catalytic reduction (SCR)
10-30 % by engine turning / injection retarded
20-30 % by engine modification
Fuel or injected in cylinder, several alternative methods available with varying reduction potential
30-60 %by sequential loading gas transfer
VOC
70-90% by recovery plant
The research concluded with recommendation for need to conduct research on technical abatement related to technological energy efficiency and fuel use in fleet.(Morrall 2000)
3.1 Mitigation and Reduction Measures
There are 3 ways by which pollution can be controlled
• Cleaning fuel prior to combustion (fuel preparation such as fractionation , catalytic cracking , desulphurization )
• Reducing the production of pollutants during combustion ( state combustion, exhaust gas recirculation and reduced temperature level )
• Cleaning exhaust gas
All these methods attracts major design modification that heat economic of energy balance
Figure 3- Mitigation and Measures – Source – ABS
Primary measures:
Secondary measures:
Operationally
Retrofitting for existing engines:
For new engines
Use of low sulfur fuel – ( less than 6g/kwh)
HFO sulfur content - Need for oil company to change their equipment for low sulfur oil production-> ship-owner will face high cost, additive solution has been expensive so far
-Reduction of NOx, Sox, + cost saving through boiled off gas reuse.
-Exhaust gas cleaning system or technology
-Sox for SECA (Emission Control Area) & Fuel change over
-Nitrogen reduction - through choice of
propulsion system
-Sulfur reduction -in bunker fuel
-Reliquification plants for LNG/LPG carriers->
- Use of Turbo generator plant –>
--PM - SAC volume is the void space in the fuel valve downstream of the closing face
-On board Catalytic system like : Converter, water injection Emulsion
-speed reduction
(10-20% )
-Use of shore power connection
Dual fuel option for low sulfur restricted areas ( 1.5-4.5)– need for additional tanks. The content of hydrocarbons in the exhaust gas from large diesel engines depends on the type of fuel, the engine adjustment and design.
-Use of NOx injectors
-Retarding injection timing
-Temperature control of the charge air
-Exhaust Gas Recirculation (EGR)
-Fuel / water emulsion
-Water injection
-Humid Air Motor (HAM) Technique- addition of wet steam to the engine
50% reduction
-Selective Catalytic Reduction (SCR)
Engine certification
-Pre-certification,
-Technical file clarification on engine family and group,
-Final certification
Alfa Lubricator system - Reduction in cylinder oil consumption-> reduction in particulate emission
-Electronic control engine Programmed fuel injection for exhaust valve-Emission reduction
- Use of high efficiency air flow for power take off reduce fuel + reduction of emission.
3.2 NOx Technology -
• Minimizing the NOx emissions from diesel engines is a pressing international problem
• In response to this, engine manufacturers are exploring all means of reducing NOx emissions
• The graph shows the international regulation standards adopted by the IMO in September 1997
Figure 4 – NOx Compliance limit – Source Yanmar
Low-NOx type marine diesel engine for new series engines use the following methods to reduce NOx emissions: NOx depends on : Fuel efficiency, Large bore, Low speed, therefore most mitigation technology when after the above characters to :
• NOx is generated when combustion gas is held at high temperature.
• To reduce NOx generation, the following steps are required:
1. Lower the combustion temperature.
2. Shorten the combustion time.
• Improvements aimed at NOx reduction are:
- Delay of fuel injection time
- Use of SCR
The IMO NOx emission limit will reduce the average NOx emission factors for ocean-going vessels by 4.1% for main engines and 8.3% for auxiliary engines. The model could help reduced emission from MISC ship further and make MISC ship meet future local and international emission regulation. NOx reduction by means of SCR can only take place in the mentioned temperature window, because if the temperature is too high, NH3 will burn rather than react with the NO/NO2. At too low a temperature, the reaction rate would be too low, and condensation of ammonium sulfates would destroy the catalyst, To reduce the NOx level by up to 98%, it is necessary to make use of the SCR (Selective Catalytic Reduction) technique.
With this method, the exhaust gas is mixed with ammonia NH3 or UREA (as NH3 carrier) before passing through a layer of a special catalyst at a temperature between 300 and 400C, whereby NOx is reduced to N2 and H2O, the reactions are, in principle, the following:
• 4NO + 4NH3 + O2 ? 4N2 + 6H2O
• 6NO2 + 8NH3 ? 7N2 + 12H2O
The amount of NH3 injected into the exhaust gas is controlled by a process computer dosing the NH3 in proportion to the NOx produced by the engine as a function of the engine load. The flexibility of the electronically controlled engine can improve the emission control and operation of NOX reduction by means of water emulsion. When operating with an SCR catalyst, it is difficult to maintain the engine dynamics and the turbocharger stability at transient engine loads. With the electronically controlled engine, a faster load-up by early exhaust valve opening and late injection timing is possible; also, modulated exhaust valve timing stabilizes the turbocharger.
EGR system has two water injection stages, with a simple water separator unit after both. The first water injection stage involves humidification with salt water in order to ensure that there is no freshwater consumption in the second freshwater injection stage. The outlet temperature of the first stage is approximately 100oC, this stage has a single multi-nozzle injector. This system is connected to the exhaust system in the same way as the simple EGR system, but the EGR line is routed to a .bubble-bath. scrubber from the which cleans and cools the exhaust gas. the water loop in the scrubber system is cooled and monitored in a Water Treatment Skid with a filter and settling system, cleaning the used sea water.
Figure 5 – SCR Technology
The NOx production only takes place at very high temperatures (2,200°K and above), and it increases exponentially with the temperature. The EGR method is based on a reduction of the oxygen content in the cylinder charge, and the HAM method is partly based on reducing the oxygen content of the cylinder charge and partly on increasing the heat capacity of the cylinder charge by the addition of water vapor. The addition of water to the HFO by homogenization increases the viscosity, to keep the viscosity at the engine inlet at 10-15 cSt, max. 20 cSt, It is necessary to raise the temperature to more than the 150oC which is standard today (max. 170oC at 50% water) raise the fuel oil loop. 10% NOx reduction for each 10% water added, the water amounts refer to the injected amount of fuel oil
Figure 6 – NOx reduction performance
At increased recirculation amounts; the HC and PM emissions are reduced corresponding to the reduction of the exhaust gas flow from the engine.
Figure 7 - Typical Pressurized Fuel Oil System with Homogenizer
3.3 Sox technology
Annex VI to MARPOL 73/78 limits the sulfur content of MFO to 1.5% per mass and will apply in designated SECAs. The first SECA is the Baltic Sea ->enters into force on 19 May 2006. The North Sea Area and the English Channel SECA will enter into force 22 November 2007. The geographical boundaries for these two SECAs are defined in MARPOL 73/78. EU directive 2005/33/EC, requires ships to burn fuel oil with less than 1.5% sulfur in the North Sea SECA from 11 August 2007.) . New SECAs are expected to be adopted in the future based on certain criteria and procedures for designation of SECAs. MARPOL. Annex VI, Regulation 14 (4b) also gives the option of using an exhaust gas cleaning system (EGCS) which reduces the total SOX emissions to 6.0 g/kWh.
3.4 Particulate Matter Technology
Reduced sac volume in the fuel valves has greatly reduced PM emissions. Advantage brought by SAC is shown below
Figure 8 – SAC valve for injection performance
Alpha lubricator -This involve technology application of high-pressure electronically controlled lubricator that injects the cylinder lube oil into the cylinder at the exact position and time that optimize conventional lubrication lubricators. A parallel line is followed by the SIP (Swirl Injection Principle) lubricator, where the oil is injected prior to piston passage, thereby having the oil distributed by the air swirl. Use for marine engines and engines for power generation purposes, very low feed rates have been demonstrated, with oil consumption down to 0.5 g/bhph. By applying low oil dosage -> emission is lowered + less cylinder oil is wasted in the engine- where it could end up in the system oil, resulting in increased TBN and viscosity.
Figure 9- Alpha Lubricator – Source ABS
Figure 10 –Particulate Matter Measure Performance - ABS
The picture above show the use of alpha lubricator reduces lub. Oil consumption and PM. also the filters used for dilution tunnel PM. measurements taken before and after the scrubber at 75% load and 15% recirculation
3.5 Impact of using new fuel
• That technology will transfer sympathetically to the marine industry via availability of engines, systems and technical assistance.
• Marine craft operation in inland water operation as well as deep sea will require fuel supplied in bulk rendering the NG distribution viable
• The use of an alternative fuel for vessel propulsion will leads to a design review of:
- Power plant
- associated fuel system
- propulsion train;
• Effectively reshaping areas such as Machinery Arrangement, Hull Form, Compartment, Cargo Deck, Payloads, Superstructure, Interior Layouts, Escape & Safety, Route Options, etc.
Figure 11 – Fuel efficiency – Source - RINA
3.6 Technology for new built
• Alternative energy
• Alternative fuel and dual fuel engines
• Infusion of water mist with fuel and subsequent gas scrubbing units for slow speed engines
• Additional firing chamber
• Potential for gas turbine complex cycle
• Potential for turbocharger diesel engine
• Compound cycle with : gasified fuel, external compressor, combustion with pure oxygen
• Exhaust after treatment for medium speed engines
• Azipod
Exhaust Gas Recirculation Measure performance
Best Practice to meet compliance
• Lloyd performed a research on exhaust gas emission assessment
• Roll-Royce built Allen 5000 Series engine with electronics fuel injectors that control NOx
• Mak engine has developed a new MDS engine with reduction in NOX without fuel penalty
Electric Propulsion Technology
The overall power train efficiency with DEP is around 87-90%. Use of permanent magnets in electric generators and motors as well as general advances in semiconductor technology may improve this figure to around 92-95% in the near future. Electrical transmission will consist of three basic energy conversions:
- From (rotating) mechanical energy into electrical energy: E-generator
- From electrical energy into (rotating) mechanical energy: E-motor
- Some form of fixed or controlled electrical conversion in between: power converter
- Simulation, risk assessment and emission quantification are other remain supporting method for decision and selection of new systems.
Electric propulsion system require development of the following technological areas:E-generator - The following tree gives a systematic overview of existing types whose improvement will be sought: Mechanical ==> Electrical: E-Generators
Ø DC Generators
Ø AC Generators
E-Motors - The following tree gives a systematic overview of existing types whose improvement will be sough: Electrical ==> Mechanical: E-motors
Ø Driving motors
Ø Synchronous Motor
Ø Positioning motors
Power converters - The following tree gives a systematic overview of existing types: Electrical ==> Electrical: power conversion or transformation
Ø Fixed transformers
Ø Controlled converters
Ø Static converters
Ø -Inverter
References
- IMO (2000) marine environmental protection committee 44th session available at: http: www.imo.org/meeting/44.html
- R. A Karam and K. Z. morgan, energy and environment cost – benefit analysis: supplement o an international journal , Georgia Institute of Technology , London, 1975 pp. 491-507.
- N Slocombe, D. S. 1993. Environmental planning, ecosystem science, and ecosystem approaches for integrating environment and development. Environmental Management .
- Ghai, Dharam and Jessica M. Vivian ,.Introduction., in Dharam Ghai and Jessica M. Vivian (eds.), Grassroots Environmental Action: People.s Participation in Sustainable Development, Routledge, London, 1992, pp. 1-22.
- D. Stapersma. Diesel Engines: A fundamental approach to performance analysis, turbocharging, combustion, emissions and heat transfer. Part A: Performance analysis"; DUT wb 4408 A / R.Nl.N.C. CC 09; 1996
- "The new concept 3-way catalyst for automotive lean-burn engine: NOx storage and reduction catalyst ", Catal. Today 27, 63-69 (1996).
7. Henley,E.J. Kumamoto,H.,1981, Reliability Engineering and Risk Assessment. Prentice- Hall Englewood Cliff, NJ.
8. Kristiansen, S. and Krlsen, J.E., Analysis of Causal Factors and Situation Dependent Factors. Report No. 80-1144,Dets NORSKE Veritas, Hovik, Norway.
9. MSA, 1995, Project 366: Formal Safety Assessment: Draft Stage 1 Report. Marine Safety Agencies, Southampton, February.
- Safety of Life at Sea Convention, 1974, consolidated edition, IMO London, 1996.
- International Convention on the Prevention of Pollution at sea, 1973, consolidated edition, IMO London, 1997.
- Ingemar Palsson, Gert Swenson. Formal Safety Assessment, Introduction of Modern Risk
- Assessment into Shipping, Report 7594, Swedish National Maritime Administration, SSPA, Maritime Consulting, February 1996.
14. Barn thijsen, 2004 Dual Fuel Electric LNG carrier Propulsion, design and operation of gas carrier ,RINA, UK
15. Murphy, 1996]M. Murphy, Variable speed drives for marine electric propulsion, Trans IMarE, 1996, Vol 108, part 2, pp 97 – 107, [Niini, 1995], M. Niini, J. Laapio
16. Nigel Gee,2002 Power solution for new breed of high speed ro-Ro and Ro Pax Ferries,ship propulsion system
About the Author
marine engineer
|
|
Astro Pneumatic AST2616 Filter/Regulator and Lubricator with Gauge $105.28 Features and Benefits: Prevents costly damage to air tools caused by rust scale and moisture Convenient minimum installation time into your compressed air system Gauge has rugged polycarbonate case with 2 face 3/8 NPT with 0160PSI gaugeProvides clean dry regulated compressed air over a wide range of air flows with accurate control and fast response. |
|
|
Astro Pneumatic Filter/Regulator And Lubricator w/Gauge. Each $72.93 Manufacturer: Astro Pneumatic. Each. Features Benefits: Prevents costly damage to air tools caused by rust, scale and moisture Convenient minimum installation time into your compressed air system Provides clean, dry, regulated compressed air over a wid |
|
|
Pneumatic Lubricator $68.51 High Quality Content by WIKIPEDIA articles The pneumatic lubricator is a device which injects an aerosolized stream of oil into the airline. This is used to provide lubrication for internal working parts of pneumatic tools and components such as actuating cylinders, valves and motors. Pneumatics is that branch of technology, which deals with the study and application of use of pressurized gas to affect mechanical motion. Pneumatic power is used in industry, where factory machines are commonly plumbed for compressed air; other compressed inert gases can also be used. Pneumatics also has applications in dentistry, construction, mining, and other areas. A compressed fluid (also called a subcooled fluid) is a fluid under thermodynamic conditions that force it to be a steam. In a plot comparing absolute pressure and specific volume (commonly called a Pv diagram), of a real gas, a compressed fluid is to the left of the liquidvapor phase boundary; that is, it will be to the left of the vapor dome. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 88 Publication Date: 2010/08/30 Language: English Dimensions: 6.00 x 9.02 x 0.21 inches |
|
|
Morris IA174 Gauge for Air Regulator $31.2 Gauge for Air Regulator. |
|
|
Plews lubrimatic Plews lubrimatic 1 4 innpt Lubricator 24-501 $41.51 1/4?npt lubricator Compact 1/4? NPTF 18 SCFM rated flow 5 oz. polycarbonate bowl May be filled while system is under pressure Transparent sight dome 7.4 overall height Maximum operating pressure 150 P.S.I. at 125 F. Operating temperature range -10 F. to +175 F. For pressures up to 250 P.S.I., metal replacement must be used 1 per box Brand #: Plews/Lubrimatic 24-501 UPC: 028893245018 Keywords: lubricator comprssr air line |
|
|
Campbell Hausfeld MP2680 In-Line Lubricator $15.99 In-Line Lubricator - MP2680 |
|
|
Emerson's Patent Axel Lubricator $19.99 Emerson's Patent Axel Lubricator - Premium Poster |
|
|
Milton Ind incom Milton Ind incom 1 4npt Mini Regulator S1145 $25.44 1/4npt mini regulator 1/4? NPT mini regulator for use with Milton 1/4? filters Brand #: Milton Ind/INCOM S1145 UPC: 030937011459 Keywords: mini regulator lubricator |
|
|
Coilhose Pneumatics 16525 1/4" Lubricator. Each $43.18 Manufacturer: Coilhose Pneumatics. Each. A tamperproof cap allows oil delivery rate to be locked in, and once oil delivery is set, proportional oil-to-air delivery assures constant even lubrication Capacity Volume = 4 oz Bowl Material = Polycarbonate Inl |
|
|
Coilhose Pneumatics 16581 1/2" Lubricator. Each $48.04 Manufacturer: Coilhose Pneumatics. Each. A tamperproof cap allows oil delivery rate to be locked in, and once oil delivery is set, proportional oil-to-air delivery assures constant even lubrication Capacity Volume = 8 oz Bowl Material = Polycarbonate Inl |
|
|
SG Tool Aid Air Regulator. Each $9.29 Manufacturer: SG Tool Aid. Each. Customers also search for: Discount Air Regulator, Buy Air Regulator, Wholesale Air Regulator, 638570980004, ToolWeb, Paint Guns Filters |
|
|
Mini Air Regulator With Gauge $56.95 ? Small lightweight unit attaches to any spray gun (including HVLP) for accurate air pressure regulation ? A true diaphragm regulator ? Push-pull lock pressure setting ? Easy to read 0-160 PSI gauge ? Capacity - 22 CFMBy Sharpe. |
|
|
Sharpe Mini Air Regulator Gauge. Each $48.04 Manufacturer: Sharpe Manufacturing. Each. Features Benefits: Mini Air Regulator Gauge 0-160 PSI--22 CFM Customers also search for: Discount Mini Air Regulator Gauge, Buy Mini Air Regulator Gauge, Wholesale Mini Air Regulator Gauge, 755652501169, ToolW |
|
|
Brady® SMC Air Line Regulator Lock-Out $37.09 Air regulator lock-out locks regulators in on or off position. Easy to use - remove snap cap, install lock-out on regulator rod, and snap replacement cap on air line regulator. Supplied with lock-out, cap and allen wrench. Available in miniature or intermediate model. |
|
|
Air Regulator, Filter and Gauge for Air Compressors regulator, filter, and gauge $59.52 Essential for optimizing the performance of both airbrush and compressor, this combo unit has a 0-60 psi air gauge, a filter to remove any potential moisture particles, and an automatic locking regulator. It?s recommended for use on diaphragm compressors and non-oil lubricated compressors with tanks. |
|
|
Powershot Regulator Kit $99.99 Trigger regulator;Air line with tire chuck;Zippered storage bag;Pencil pressure gauge;CO2 bottle is NOT included Powershot Regulator Kit |
|
|
Astro Pneumatic AST5706 Brass Air Regulator $21.45 This brass air regulator increases or decreases air pressure as desired. Air Inlet: 1/4 npt. Air Outlet: 1/4 npt. Dimensions: 5 L x 3.55 W x 1 H. |
|
|
Brass Air Regulator $6.95 Control air pressure as needed. Designed with four position on-off detent stops. Openings: 1/4'' NPT Male x 1/4'' NPT Female. Not a shut-off valve. Brass construction resists oxidation.By Tool Aid. |
|
|
Coilhose Pneumatics 1/2" Lubricator w/Bowl Guard. Each $53.47 Manufacturer: Coilhose Pneumatics. Each. A tamperproof cap allows oil delivery rate to be locked in, and once oil delivery is set, proportional oil-to-air delivery assures constant even lubrication Bowl guard Capacity Volume = 8 oz Bowl Material = Polyca |
|
|
Coilhose Pneumatics 16616 3/4" lubricator w/Bowl Guard. Each $88.45 Manufacturer: Coilhose Pneumatics. Each. A tamperproof cap allows oil delivery rate to be locked in, and once oil delivery is set, proportional oil-to-air delivery assures constant even lubrication Capacity Volume = 23 oz Bowl Material = Polycarbonate In |
|
|
Crossfire Stealth 4500psi Regulator $32.95 Crossfire Stealth 4500psi Regulator Now you can install the Crossfire Stealth regulator on any of your favorite HPA Compressed Air tanks. The Crossfire Stealth regulator is very light weight yet durable enough to take some of toughest abuse in paintball. Features: * Weighs only 5.2 oz |
|
|
Western Enterprises - Regulator Inlet Nipples $2.8 High performance regulator and flowmeter parts for gasses. Regulator and flowmeter parts are recommended for gasses such as Argon, Nitrogen, Helium, Air, etc. Safe for use with medical mixtures. Regulator Inlet Nipple comes with a filter as an added feature. |
|
|
Sharpe SHP1410 Mini Air Regulator with Gauge $67.6 Small lightweight unit attaches to any spray gun (including HVLP) for accurate air pressure regulation. A true diaphragm regulator. Pushpull lock pressure setting. Easy to read 0160 PSI gauge. Capacity 22 CFM |
|
|
Sharpe Model 18C 3R Air Regulator. Each $45.75 Manufacturer: Sharpe Manufacturing. Each. Features Benefits: 3 Regulated outlets Air Inlet 3/8 F.P.T. All outlets ¼ F.P.T. Capacity 50 CFM Shipping Wt. 1 lb. 9 oz. Customers also search for: Discount Model 18C 3R Air Regulator, Buy Model 18C 3R Air Reg |
|
|
Mountain MTN6183 Air Regulator For Devilbiss Paint Guns $24.29 Features and Benefits. Made for Devilbiss paint guns. Easy installation 5/16 thread size. Includes 0160 psi pressure gauge. Included in a display package. 1 year limited warrantyThis air regulator is designed to provide better air control for Devilbiss paint guns. |
|
|
Sharpe Manufacturing SHA1410 Mini Air Regulator with Gauge $68.39 Features and Benefits: This small lightweight unit attaches to any spray gun including HVLP for accurate air pressure regulation It is a true diaphragm regulator with pushpull lock pressure setting and easytoread 0160 psi gauge Air flow capacity: 22 cfm |
|
|
SG Tool Aid SGT98025 Brass Air Regulator $22.13 Control air pressure as needed. Designed with four position onoff detent stops. Openings: 1/4 NPT Male x 1/4 NPT Female. Resists oxidation. Brass Air Regulator. Dimensions: 2.3 L x 2.1 W x 0.9 H. |
|
|
Sharpe 120CFM / 50CFM 1/2" let Air Filter / Regulator. Each $202.44 Manufacturer: Sharpe Manufacturing. Each. Air Control Units. Air Control Unit, 120 CFM Filter Capacity 160 psi Customers also search for: Discount 120CFM / 50CFM 1/2" let Air Filter / Regulator, Buy 120CFM / 50CFM 1/2" let Air Filter / Regulator, Wholes |
|
|
R07-100-Rnka - Regulator - Air $63.09 [R07-100-RNKA] UPC: 86607570 |
|
|
VIAIR 90150 PSI Air Pressure Regulator $43.64 Viair inline pressure regulator may be used to regulate air pressure from an air tank to any pressure between 0 to 200 PSI. This is useful for installations that supply air to locking differentials and air tools. The regulator also provides an easy to read gauge that allows adjustment of inline pressure a compression fitting for tank pressure side and a T fitting that will allow regulated pressure to be fed to two locations. Regulate air pressure at any point between 0 PSI and 200 PSI. Locking adjustment dial. Mounting bracket included. Includes the following brass fittings: Tfitting (1/4 inch NPT female x 1/4 inch NPT female x 1/4 inch NPT male) compression fitting for 1/4 air line 1/4 NPT Plug. Great for adjusting pressure for air locking differentials. |
|
|
Mountain Air Regulator for Devilbiss Paint Guns. Each $11.04 Manufacturer: Mountain. Each. Features and Benefits Made for Devilbiss paint guns Easy installation - 5/16" thread size Includes 0-160 psi pressure gauge Included in a display package 1 year limited warranty This air regulator is designed to provide bett |
|
|
Mountain MTN6182 Air Regulator With Gauge $25.08 Features and Benefits: Includes a 0160 PSI pressure gauge Provides fine air control for spray guns air tools Swivel top allows for easy installation Infinite adjusting range fits any spray gun or air tool inlet: Air outlet:1/4 NPT |
|
|
Mechanical Lubricator, AT&SF #3751 from the Railroad Series $19.99 Gordon Osmundson Mechanical Lubricator, AT&SF #3751 from the Railroad Series - Photographic Print |
|
|
Sharpe Manufacturing SHA6730 120CFM / 50CFM 1/2in. Inlet Air Filter / Regulator $271.83 Effective at removing water oil and contamination to protect air cylinders and air tools. Contains 18C3R regulator with a 160 lb. inverted gauge and air cock. Regulated outlet and filtered main line outlet with 200 lb. gauge included. 5 micron filtration. Filter capacity: 120 cfm; regulator capacity: 50 cfm. |
|
|
Guerrilla Air Myth G2 Regulator Only 4500psi $49.95 Features Include: Low-Profile Lite-Weight Increased Shot Count Only 0.75"" Length from ASA to Bottle Reg Weighs Only 3.5 oz. Virtually Instantaneous Recharge Rebuildable Replaceable Head Tip Multi positional brass thread collar 1800 psi low side PRO Burst Disk 7500 psi high side PRO Burst Disk Comes packaged in box with directions and allen key CAUTION: As with any situation in which a regulator is being removed from or installed onto an HPA tank, we recommend having the Myth Regulator installed and old regulator removed only by a qualified Airsmith. Working on a tank without an appropriate knowledge of standard safety precautions and procedures may cause personal injury as well as damage to the tank and/or regulator. |
|
|
MotorGuard Regulator / Filter. Each $117.69 Manufacturer: MotorGuard. Each. Features Benefits: An ultimate air pressure stabilizer, coupled with a world class water separator, this filter / regulator control system is unsurpassed in construction and performance All features contained in one stre |
|
|
Scubapro MK25/S600 Regulator $729 Our top performing balanced piston first stage paired with our best-selling high performance air balanced second stage; this combination is SCUBAPRO’s ultimate regulator combination. Size/Dimensions: Universal Color: As Shown |