Rear Axle Puller

Rear Axle Puller

2010 Ford F-150 News: SVT Raptor, Harley-Davidson Editions

Erase from your memory the F-150 Lightning, SVT's tire-smoking sports car/pickup. For 2010, SVT went the extreme opposite direction with the F-150 SVT Raptor: A mogul-jumping, off-road desert runner. Raising the number of F-150 models to nine is the Harley-Davidson F-150 edition, which features 22-inch-diameter polished, forged aluminum wheels, chrome exhaust tips and Harley-Davidson graphics and logos on just about every available space.

Existing models get several new features, too. A chrome billet grille is available on the XLT Chrome package, a chrome mesh grille insert comes on the Lariat Chrome package and black tubular running boards are available on the XL Regular Cab and SuperCab.

The first F-150 SVT Raptors will come with the 320-hp, 390 lb.-ft. torque, 5.4-liter V8 offered in other F-150s. Available later will be a 6.2-liter V8 with approximately 400 hp that'll launch the SVT Raptor into low-earth-orbit if you can find the right jump. Just make sure to nail the landing after re-entry. In addition to the Raptor's 6.2L V8 (which will come with a six-speed automatic), the 2010 F-150 is available with three engines, all V-8s: a 320-horsepower, 5.4-liter; a three-valve-per-cylinder 292-horsepower, 4.6-liter; and a two-valve-per-cylinder 248-horsepower 4.6-liter.

The first two come with a six-speed automatic, while the two-valve 4.6L is mated to a four-speed automatic. A two-wheel-drive F-150 with the 4.6-liter, three-valve engine is EPA estimated at 21 miles per gallon on the government's highway driving cycle. A 2WD 5.4-liter will achieve 20 mpg on the highway.

Some keys to successful desert race trucks are long suspension travel to soak up bumps and keep the drive wheels on the ground, robust shock absorbers with extra fluid reservoirs to prevent overheating, and reinforced suspension components to stand up to the constant pounding. The Raptor has over 12 inches of travel in the rear suspension and over 11 up front. While long for a stock vehicle, it's far less than half of pure race trucks, so don't challenge Robbie Gordon to a desert duel.

The Raptor is equipped with specially designed Fox Racing Shox shock absorbers, designed to maintain their performance over miles of washboard surfaces. To take the pounding of a sprint through the desert, Ford added a beefier rear axle housing and a completely new front suspension with strong upper and lower control arms and stronger tire rods, among other enhancements. In addition the Raptor has a seven-inch wider track - the distance between tires on the same axle - to improve stability while bouncing between the sagebrush and yucca plants.

For situations where deep sand or mud slow progress, the Raptor has a locking rear differential. In addition, selecting the off-road mode disables the electronic driver aids (electronic stability control and traction control) and switches the logarithm of the anti-lock brakes to a more off-road- appropriate setting. The Raptor is fitted with giant 315/70R17 BFGoodrich All-Terrain TA/KO tires. These 35-inch diameter tires add ground clearance to help avoid contact with rocks. Just in case that's not enough clearance, the Raptor comes standard with heavy-duty skid plates to protect the oil pan, transmission and other key bits under the vehicle.

Visually, the Raptor has a unique grille, front bumper and fenders. Inside, there's a revised console. The steering wheel features an orange stripe at the top, similar to those found on NASCAR racecars, to help the driver know how far the wheel is turned in case he loses track in the excitement. The Raptor is available only as a four-wheel-drive SuperCab with a 5.5-foot bed.

Studies have shown that many Harley riders like to tow their motorcycles to events, rather than eat June bugs all the way there and back. And the Ford F-150 is one of their most popular choices for that tow work, with Ford's Trailer Sway Control. Whether they know it or not, the 2010 Ford F-150's biggest advantage for Harley pullers is how Ford has reprogrammed the pickup's electronic stability control system computer to recognize when the trailer begins to sway then react to quell trailer motion by applying individual brakes or reducing acceleration. Also, an optional in-dash trailer brake controller prevents the bruised knees and scraped shins common with aftermarket controllers. And let's not forget...there are Harley-Davidson logos on the sides, front fenders, tailgate, ignition key, door trim panels, the windshield and a few other places.

The F-150 continues its reign as the "favorite" among pickups. The SVT Raptor and Harley-Davidson F-150 editions will only add to that lead.

About the Author

autoMedia.com, with their team of automotive experts, has been providing auto shoppers, car enthusiasts and do-it-yourselfers automotive advice they can trust for over 10 years. Enjoy reading more of their popular car reviews and road tests plus learn more about the 2010 Ford F-150, including the latest pricing, rebates and incentives, safety features, photo galleries and more, along with details on all Ford Models.

Rear Axle Bearing Puller Kit $41.95 ? Three pullers designed to make the removal of semi-floating rear axle bearings easier on most domestic cars. ? Includes: 1 in. x 1-7/8 in. Puller, 1-5/16 in. x 2-2/8 in. Puller, 1-3/8 in. x 2-7/8 in. Puller. ? Packaged in a blow molded case with laminated instruction cards or stickers integrated into case design for handy reference of application information. ? Removeable hinged style lid allows for convenient storage in tool box drawers. ? Individual part numbers molded into case for easy reference. Applications: 1 in. x 1-7/8 in. Puller - fits minimum bearing tube I.D. of 1 in. and maximum axle tube I.D. of 1-7/8 in. 1-5/16 in. x 2-3/8 in. Puller - fits minimum bearing tube I.D. of 1-5/16 in. and maximum axle tube I.D. of 2-3/8 in. 1-3/8 in. x 2-7/8 in. Puller - fits minimum bearing tube I.D. of 1-3/8 in. and maximum axle tube I.D. of 2-7/8 in. By K-D Tools.

OTC Rear Axle Bearing Puller. Each $43.47 Manufacturer: OTC. Each. Features and Benefits: Fits minimum bearing tube I.D. of 1" and maximum axle tube I.D. of 1-7/8" Customers also search for: Discount OTC Rear Axle Bearing Puller, Buy OTC Rear Axle Bearing Puller, Wholesale OTC Rear Axle Bearing

OTC 6540 Rear Axle Bearing Puller Set $213.58 OTC rear axle bearing service sets are designed to remove axle bearings from rear semifloating differentials. The kits work with any 5/818 in. threaded slide hammers. Small puller that fits 1 in. to 1 7/8 in. bearing tubes Medium puller that fits 1 5/16 in. to 2 3/8 in. bearing tubes Large puller that fits 1 3/8 in. to 2 7/8 in. bearing tubes Storage case

CTA Rear Axle Service Kit $118.95 For rear axle and bearing removal.     Includes: Slide hammer assembly Rear axle puller plate 3 Sizes of rear axle bearing pullers Puller hook for removing oil seals and bearings

OTC OTC6540 8 Piece Rear Axle Bearing Puller Set $282.5 Features and Benefits:. Rear axle bearing puller fits min. bearing tube I.D. of 1 and max axle tube I.D. of 17/8 . Rear axle bearing puller fits min. bearing tube I.D. of 15/16 and max axle tube I.D. of 23/8 . Rear axle bearing puller fits min. tube I.D. of 13/8 and max axle tube I.D. of 27/8 . Slide hammer tee bar. Slide hammer weight: 5 lbs . Pulling hook . Rear axle pulling plate . Bearing cup removerThis 8 piece set contains slide hammer and popular attachments needed for servicing flange type floating rear axle bearing and seals in most late model rear wheel drive cars and light trucks. Also included is a molded case for storage.

OTC OTC7792 Slide Hammer Rear Axle Service Puller Set $245.65 Features and Benefits: Weight: 11 lbs. 4 oz.The tools you need for flangetype rear axle and bearing removal on most late model passenger cars and light trucks. Set includes the No. 7374 rear axle pulling plate and 5 lb. slide hammer. The axle bearing pullers used with the slide hammer make short work of removing semifloating rear axle bearings. Consists of: No. 7374 Rear axle pulling plate with 5 lb. slide hammer. No. 7495A Rear axle bearing puller. Fits min. bearing tube I.D. of 1 and max. axle tube I.D. of 17/8 . No. 7496A Rear axle bearing puller. Fits min. bearing tube I.D. of 15/16 and max. axle tube I.D. of 23/8 . No. 7497A Rear axle bearing puller. Fits min. bearing tube I.D. of 13/8 and max. axle tube I.D. of 27/8 . No. 27315 Puller hook for use with the 5 lb. slide hammer. Removes oil seals bearings etc.

Rear Axle Bearing Puller Set by OTC $89.95 Each of the pullers included in this set make short work removing semi-floating rear axle bearings. The 3-piece set services most domestic cars. Works with OTC puller-type slide hammers. Weight: 2 lbs. 3 oz. in plastic carrying case. By OTC. Included sizes (Fit main bearing tube I.D.) 1'' to 1-7/8'', 1-5/16''-2-3/8'', 1-3/8''-2-7/8''

K-D Tools Rear Axle Bearing Puller Kit $36.69 Three pullers designed to make the removal of semi-floating rear axle bearings easier on most domestic cars. Includes: 1 in. X 1-7/8 in. Puller, 1-5/16 in. X 2-2/8 in. Puller, 1-3/8 in. X 2-7/8 in. Puller. Packaged in a blow molded case with laminated instruction cards or stickers integrated into case design for handy reference of application information. Removeable hinged style lid allows for convenient storage in tool box drawers. Individual part numbers molded into case for easy reference. Applications: 1 in. X 1-7/8 in. Puller - fits minimum bearing tube I. D. Of 1 in. And maximum axle tube I. D. Of 1-7/8 in. 1-5/16 in. X 2-3/8 in. Puller - fits minimum bearing tube I. D. Of 1-5/16 in. And maximum axle tube I. D. Of 2-3/8 in. 1-3/8 in. X 2-7/8 in. Puller - fits minimum bearing tube I. D. Of 1-3/8 in. And maximum axle tube I. D. Of 2-7/8 in.

KD Tools KDT41710 Rear Axle Bearing Puller Set $53.89 Features and Benefits:. Three pullers designed to make the removal of semifloating rear axle bearings easier on most domestic cars. Includes: 1 in. x 17/8 in. Puller 15/16 in. x 22/8 in. Puller 13/8 in. x 27/8 in. Puller. Packaged in a blow molded case with laminated instruction cards or stickers integrated into case design for handy reference of application information. Removable hinged style lid allows for convenient storage in tool box drawers . Individual part numbers molded into case for easy referenceApplications:. 1 in. x 17/8 in. Puller fits minimum bearing tube I.D. of 1 in. and maximum axle tube I.D. of 17/8 in.. 15/16 in. x 23/8 in. Puller fits minimum bearing tube I.D. of 15/16 in. and maximum axle tube I.D. of 23/8 in.. 13/8 in. x 27/8 in. Puller fits minimum bearing tube I.D. of 13/8 in. and maximum axle tube I.D. of 27/8 in.

KD Tools Rear Axle Bearing Puller Set. Each $36.58 Manufacturer: KD Tools. Each. Features and Benefits: Three pullers designed to make the removal of semi-floating rear axle bearings easier on most domestic cars Includes: 1 in. x 1-7/8 in. Puller, 1-5/16 in. x 2-2/8 in. Puller, 1-3/8 in. x 2-7/8 in. Pull

OTC OTC7372 Axle Puller Plate For OTC7374 $61.71 This puller will enable you to remove flangetype rear axles from most late model cars and light trucks. Works on axles having bolts and studs up to 9/16 Diameter. Rear Axle Puller Plate. Dimensions: 0.8 H x 4.61 W x 6.7 D.

OTC Rear Axle Bearing Puller Set - 3 Pc. $125.95 Each of the pullers included in this set make short work removing semi-floating rear axle bearings. The 3 piece set services most domestic cars. Works with OTC puller-type slide hammers.Included sizes (Fit main bearing tube I.D.)? 1'' to 1-7/8''? 1-5/16''-2-3/8''? 1-3/8''-2-7/8''

4277B - Puller Rear Axle Flange $39.42 [577-4277B] Truck Delivery UPC: 662679470937

OTC Slide Hammer Rear Axle Service Puller Set. Each $185.34 Manufacturer: OTC. Each. Features Benefits: The tools you need for flange- type rear axle and bearing removal on most late model passenger cars and light trucks. Set includes the No. 7374 rear axle pulling plate and 5 lb. slide hammer. The axle bearing

Proto Puller Set Rear Axle Flange Foot Edp#47142. 1 Set $86.78 Manufacturer: Proto. 1 Set. Spreading Cap. = 5 in [Min], 6 in [Max] Bolt/Screw Size = 5/8 in Bolt/Screw Rated Cap. = 6 tons Type = Slide Hammer Puller Wt. = 9 lb Customers also search for: Discount Puller Set Rear Axle Flange Foot Edp#47142, Buy Puller

OTC 8 Piece Rear Axle Bearing Puller Set. Each $209.99 Manufacturer: OTC. Each. Features Benefits: Set contains slide hammer and popular attachments needed for servicing flange type floating rear axle bearing and seals in most late model rear wheel drive cars and light trucks in a blow mold case. 7495A Rea

OTC Axle Puller Plate For OTC7374. Each $43.47 Manufacturer: OTC. Each. Customers also search for: Discount Axle Puller Plate For OTC7374, Buy Axle Puller Plate For OTC7374, Wholesale Axle Puller Plate For OTC7374, ToolWeb, Puller Tools

Rear Axle $4 hm-22e-z-26 Rear Axle

OTC OTC7208A Front Hub Puller with Spare Locknut $63.71 The 7208 puller removes front hubs without damaging the wheel bearing. Its universal design fits most FWD cars. The spare locknut lets you use it with a standard slide hammer puller for rear axle flanges.

Front Hub Puller With Spare Locknut $63.95 The 7208 puller removes front hubs without damaging the wheel bearing. Its universal design fits most FWD cars. The spare locknut lets you use it with a standard slide hammer puller for rear axle flanges.By OTC.

Sunex SUN3911 Slide Hammer Puller Set $156.55 Features and Benefits: Jaws can be set up for 2 or 3 jaw internal or external pulling Included in a heavyduty steel carrying caseThis professional slide hammer puller set eases removal of flangetype axles oil seals bearings and other press fit parts. It s made with the quality and durability to last This set includes the following: 5 lb. heavy duty slide hammer 8 function internal or external 3 jaw puller Internal or external 2 jaw puller Puller hook Rear axle puller Dent puller and Special grip wrench adapter.

OTC OTC4579 Stinger 9 Way Slide Hammer Puller Set $122.83 Features and Benefits Internal and External Jaws provide a variety of combinations to pull bearings gears and seals Pulls Flangetype rear axle and most front wheel drive hubs Set includes grip wrench adapter and dent puller Two and threeway cross blocks and cone provide perfect jaw configuration for many jobs Packaged in a blow molded case for easy storageThis 9 way slide hammer puller set is designed for use with other OTC 5/8 18 thread slide hammer attachments. Includes 2 way cross block front hub puller internal 3 jaw puller external 3 jaw puller rear axle puller internal 2 jaw puller external 2 jaw puller grip wrench adapter dent puller and puller hook. 5 lb. hammer in polished chrome finish.

Rear Wheel Axle 1P $5.26 Rear Wheel Axle 1P

50H03-26 Rear Axle $4 50H03-26 Rear Axle

OTC Silver Slapper - 10-Way Slide Hammer Puller Set $351.95 Includes:? Slide hammer with 5 lb. hammer? Rear axle pulling attachment? 3-way cross head? Cone? 2-way cross block? Puller hook attachment? Pulling jaws(3) for internal or external pulling jobs? Puller hook attachment? Grip wrench adapter with single lead (wrench not included)? Dent puller attachment? Internal/external pulling jaws (3) 6-1/2''? Internal puller jaws (3) 2-3/8''? Front hub puller assembly? Forcing screw? Sleeve? Blow molded case

OTC OTC7948 Silver Slapper 10Way Slide Hammer Puller Set $408.55 Includes: Slide hammer with 5 lb. hammer rear axle pulling attachment 3way cross head cone 2way cross block puller hook attachment pulling jaws(3) for internal or external pulling jobs puller hook attachment grip wrench adapter with single lead (wrench not included) dent puller attachment internal/external pulling jaws (3) 61/2 internal puller jaws (3) 23/8 front hub puller assembly forcing screw sleeve and blow molded case.

OTC OTC7947 EightWay Slide Hammer Puller Set with Plastic Case $230.26 Features and Benefits: Puller jaws can be set up for 2/3way internal or external jobs Attachments include a dent puller internal/external pulling jaws puller hook attachment rear axle pulling attachment and a grip wrench adapter Comes neatly packaged in a handy plastic carrying caseThis is one of the most popular slide hammer puller sets Add a variety of puller attachments to a 5 lb. slide hammer puller and you get the capability to pull flangetype rear axles stubborn oil seals and bearings and other pressfit parts.

CTA Flange Type Axle Puller $76.95 Works on most cars and light trucks Can use as a wheel puller with a CV Joint Puller or a Front Wheel Hub Puller 5lb. (2.3kg) hammer and 4-slot forged yoke for use on 4, 5 or 6 bolt or stud applications

4277 - Puller Set Rear Axle Flange Foot Edp#47142 $104.16 [577-4277] Truck Delivery UPC: 662679471422

OTC Silver Slapper - 8 Way Slide Hammer Puller Set $222.95 ? Use for 2/3-way internal and external jobs? Attachments include a dent puller, internal/external pulling jaws, hook attachments, rear axle pulling attachment, and more? Comes neatly packages in a handy storage case

OTC OTC7947 Silver Slapper 8 Way Slide Hammer Puller Set $230.26 Use for 2/3way internal and external jobs. Attachments include a dent puller internal/external pulling jaws hook attachments rear axle pulling attachment and more. Comes neatly packages in a handy storage case.

OTC OTC7948 10Way Slide Hammer Puller Set with Plastic Case $408.55 Features and Benefits: Puller jaws can be set up for 10way internal or external jobs Attachments include a dent puller internal/external pulling jaws puller hook attachment rear axle pulling attachment and a grip wrench adapter Comes neatly packaged in a handy plastic carrying caseThis is one of the most popular slide hammer puller sets Add a variety of puller attachments to a 5 lb. slide hammer puller and you get the capability to pull flangetype rear axles stubborn oil seals and bearings and other pressfit parts.Contains: OTC1155 Slide hammer w/5 lb. hammer OTC7372 Rear axle pulling attachment OTC24544 3way cross head OTC24545 Cone OTC27241 2way cross block OTC27315 Puller hook attachment OTC34698 Pulling jaws (3) for internal or external pulling jobs OTC 05378 Grip wrench adapter w/single lead (wrench not included) OTC205377 Dent puller OTC 4148 Internal/external pulling jaws (3) 61/2in. OTC32054 Internal puller jaws (3) 23/8 in. OTC7208 Front hub puller assembly OTC309321 Forcing screw and OTC215895 Sleeve.

OTC 7947 Silver Slapper Puller Set in Storage Case $208.92 You can pull flangetype rear axles remove Stubborn oil seals and bearings and other pressfit parts. Puller jaws can be set up for 2/3 jaw internal or externalpulling jobs. Includes: 5lb slide hammer Rear axle pulling attachment Grip wrench adapter Cone Dent puller attachment Puller hook attachment 2way cross block 3way cross head

Rear Axle Covers $102.95 Show Chrome Rear Axle Covers Sold in pairs

Rear Axle Hardware $8.99 Biker's Choice Rear Axle Hardware Spacers, washers and axle nut Chrome plated Axle available separately

Rear Swing Arm Axle 1P $5.26 Rear Swing Arm Axle 1P

OTC Stinger 9 Way Slide Hammer Puller Set. Each $85.09 Manufacturer: OTC. Each. Features Benefits Internal and External Jaws provide a variety of combinations to pull bearings, gears and seals Pulls Flange-type rear axle and most front wheel drive hubs Set includes grip wrench adapter and dent puller Two a