Pump Puller Kit

Pump Puller Kit

The Camping Checklist- What to Take Camping

If you're planning a camping trip, you need to also plan what you're going to bring.  There's nothing better than a fun filled camping adventure with family and friends, but there's nothing worse than getting to a far flung destination and not having what you need.

I recommend creating, or printing the list we have below to help you prepare for your trip.  As you're packing up the truck, van, mule or whatever vehicle you're traveling in, check off the items as you load them.  Another great organization tip is to purchase large duffle bags or rubber containers and label them with the appropriate name, e.g., cooking, cookware, etc…

Cooking: You have to eat!  Make sure to also plan you meals and don't forget to bring snacks!

• Camp stove and fuel
• Charcoal (if you'll be using on-site barbecue)
• Food preparation table
• Coffee pot
• Folding table and chairs

Cookware and Utensils: This is the section people typically forget an item or two.  Make sure that the items below coincide with the food you're going to be cooking.

• Measuring cup
• Pots and pans
• Pot holder
• Spatula/tongs
• Serving spoon
• Knives, forks, spoons
• Plates, cups, bowls
• Salt and pepper

Misc: Depending on your choice of camping activities this part of the list might vary quite a bit.  Yet, what we've provided below are highly recommended.  If you're going fishing, or canoeing, add the necessary items to this part of the list.

• Camera
• Spare batteries, Spare memory card
• Power charger for cell phone
• Radio
• GPS
• Compass and maps
• Multipurpose knife or camper's tool
• Folding table and chairs
• Clothesline/clothes pins
• Rope, cord or wire
• Whisk broom and dustpan
• Small sewing kit
• Duct tape
• Laundry bag

Sleeping: Weather is a huge factor when preparing these items. Make sure to check the weather before leaving for your trip.  If it's going to be cold, determine that your sleeping bag is adequate for the temperature.

• Ground sheet
• Sleeping pad
• Air bed and pump
• Sleeping bags and blankets
• Pillows and pillow cases
• Sheets
• Foam ear plugs
• Sleep mask
• Night wear
• Hat to wear on cold nights
• Flashlight
• Books/magazines

Camping gear: Ah…the gear that makes camping possible.  We recommend that you check this list twice.  Camping without a tent can be an uncomfortable experience if you're not prepared for it.

• Tent, poles and stakes
• Ground cover or tarp
• Stake mallet, stake puller and small hand axe
• Tent repair kit
• Screenhouse
• Flashlight
• Battery-operated lantern
• Extra batteries
• Lantern, fuel and extra mantles
• Firestarter sticks
• Firewood
• Folding saw
• Fuel funnel (for liquid fuel lantern or stove)
• Lantern carry case
• Lantern tree hanger
• Long-nosed butane lighter
• Matches
• Waterproof match container

 

About the Author

The Camping Equipment Company has designed top of the line family tents since 2000.  Providing innovative high quality designs at an affordable price and offering one of the largest selections of family camping tents, screen houses, canopies, hammocks, sleeping bags, self inflating mattresses and many more camping accessories.  The Camping Equipment Company caters to all camping enthusiasts. Camping Equipment

 

Exhaust Spring/ Puller Kit $11.99 Vance & Hines Exhaust Spring/Puller Kit For SS2-R exhaust Includes 10 springs and 1 puller

Steering Wheel Puller Kit $53.95 ? This kit has what it takes to remove a steering wheel from most domestic and import cars with or without telescoping tilt columns. Use the puller legs with the steering wheel puller to remove steering wheels on late model GM vehicles Contents: ? Steering Wheel Puller Yoke and Screw Extension Bushing ? Pivot Pin ? Lock Plate Removal Tool ? 2 Pc. Puller Leg Package ? Lock Plate Remover Collars and Nut Washer ? Lock Place Depressor Frame ? Screw PackageBy K-D Tools.

ATC Kit w/ Puller $2.99 Emergency Fuse Kits with Fuse Puller Blade Type ATC-5, 10, 15, 20, 25, & 30

Slide Hammer Puller Kit by Wilmar Tools $113.99 Best method of hub removal;Includes slide ha mmer with internal and external puller fingers;Locking pliers adapter, puller hook and dent puller;Sturdy storage case included Slide Hammer Puller Kit by Wilmar Tools

Slide Hammer Puller Kit $150.95 ? This kit provides a wide range of puller applications such as: Flange-type axles, oil seals and other press fit parts. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs. Contents: ? Shallow Flange ? Deep Flange ? Slide Hammer ? 2 Way Yoke ? 3 Way Yoke ? Center Bolt and Cone ? 3 Pc. Adapter Set ? Leg Package with ScrewsBy K-D Tools.

Rear Axle Bearing Puller Kit $41.95 ? Three pullers designed to make the removal of semi-floating rear axle bearings easier on most domestic cars. ? Includes: 1 in. x 1-7/8 in. Puller, 1-5/16 in. x 2-2/8 in. Puller, 1-3/8 in. x 2-7/8 in. Puller. ? Packaged in a blow molded case with laminated instruction cards or stickers integrated into case design for handy reference of application information. ? Removeable hinged style lid allows for convenient storage in tool box drawers. ? Individual part numbers molded into case for easy reference. Applications: 1 in. x 1-7/8 in. Puller - fits minimum bearing tube I.D. of 1 in. and maximum axle tube I.D. of 1-7/8 in. 1-5/16 in. x 2-3/8 in. Puller - fits minimum bearing tube I.D. of 1-5/16 in. and maximum axle tube I.D. of 2-3/8 in. 1-3/8 in. x 2-7/8 in. Puller - fits minimum bearing tube I.D. of 1-3/8 in. and maximum axle tube I.D. of 2-7/8 in. By K-D Tools.

Universal Flywheel Puller $64.95 Parts Unlimited Universal Flywheel Puller For most motorcycle, ATV, watercraft and snowmobile engines Complete with hardware kit and adapter for male or female removal

KD Tools Steering Wheel Puller Kit. Each $57.29 Manufacturer: KD Tools. Each. Features and Benefits: This kit has what it takes to remove a steering wheel from most domestic and import cars with or without telescoping tilt columns Use the puller legs with the steering wheel puller to remove steering w

Gearwrench KD41620 Steering Wheel Puller Kit $57.72 This kit has what it takes to remove a steering wheel from most domestic and import cars with or without telescoping tilt columns. Use the puller legs with the steering wheel puller to remove steering wheels on late model GM vehicles Contents:. Ste

CTA Power Steering Pump/Alternator Pulley Puller $29.95 The CTA Power Steering Pump/Alternator Pulley Puller removes pressed-on 1 or 2 groove pulleys from alternators and power steering pumps without causing damage. Fits both large and small pulleys found on older domestic and import passenger cars.     Features: Rigid, drop-forged jaws Solid block body Fine thread screw for easy pulling

Lisle Harmonic Balancer Puller Set $172.95 Updated jaw design on damper puller provides even greater strength. Clevis pins allow jaws to be quickly removed and replaced. This kit features the puller hardware and special pulling screws to remove most automotive harmonic balancers.     Includes: A standard harmonic balancer puller, pulling screws and adapters for 3300 and 3800 GM V6 engines Harmonic damper pulley puller for Chrysler, GM, Mitsubishi and Dodge

Bussmann Cooper Emergency Kit With Fuse Puller EK7 $23.26 Emergency kit with fuse puller. For automobile radio instrument protection. Kit contains 6 fuses most likely needed. American car AGC 5 15 30 SFE 9 14 and 20. Carded. Length: 0.38. Width: 4.75. Height: 2.75

KD Tools KD 41620 Steering Wheel Puller Kit $57.72 This kit has what it takes to remove a steering wheel from most domestic and import cars with or without telescoping tilt columns. Use the puller legs with the steering wheel puller to remove steering wheels on late model GM vehiclesContents:. Steering Wheel Puller Yoke and Screw Extension Bushing. Pivot Pin. Lock Plate Removal Tool. 2 Pc. Puller Leg Package. Lock Plate Remover Collars and Nut Washer. Lock Place Depressor Frame. Screw Package

CTA Combination 2-Jaw to 3-Jaw Gear Puller Kit $22.95 Convert from 2-jaw to 3-jaw puller Includes two yokes, center screw and 3 legs   Specifications: Spread: 4" Reach: 4-1/2" Capacity: 1 Ton

Lisle Pulley Puller / Installer $67.95 ? Removes and Installs Pressed on Power Steering, Alternator and Air Pump Pulleys? Makes removing pressed on pulleys an easy job? This puller will remove and install pulleys on most GM, Ford and Chrysler vehicles? Special adapters are included for GM 3.1 and Quad 4 engines? Works on traditional V-shaped pulleys and serpentine belt system pulleys? Tool comes with detailed instructions and a heavy-duty plastic storage case

Lisle LS51700 Harmonic Balancer Puller Set $153.4 Updated Jaw Design On Damper Puller Provides Even Greater Strength Clevis Pins Allow Jaws To Be Quickly Removed and Replaced This kit features the puller hardware and special pulling screws to remove most automotive harmonic balancers Includes a standard harmonic balancer puller pulling screws and adapters for 3300 and 3800 GM V6 engines and our updated harmonic damper pulley puller for Chrysler GM Mitsubishi and Dodge Replaces LIS49650

Johnson Pump / Johnson Pump Impeller Kit / 09-1028B $37.15 Johnson Pump - Johnson Pump Impeller Kit - 09-1028B

Johnson Pump / Johnson Pump Impeller Kit / 09-1026B-1 $26.84 Johnson Pump - Johnson Pump Impeller Kit - 09-1026B-1

Johnson Pump / Johnson Pump Impeller Kit / 09-812B-1 $39.02 Johnson Pump - Johnson Pump Impeller Kit - 09-812B-1

Johnson Pump / Johnson Pump Impeller Kit / 09-808B-1 $24.84 Johnson Pump - Johnson Pump Impeller Kit - 09-808B-1

Johnson Pump / Johnson Pump Impeller Kit / 09-810B-1 $26.11 Johnson Pump - Johnson Pump Impeller Kit - 09-810B-1

03875 - Plumbers Puller Kit $21.23 [0328278] UPC: 017197738753 7.63L x 4.63W x 11.25H 0.75 LB 0.23 Cubes

OTC OTC6575 Hub Grappler Puller Kit $723.15 The Hub Grappler Kit is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. This eliminates unnecessary alignments or the use of a shop press cutting service time dramatically. The new Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun to also minimize service time. The new jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners. The new 3/4 custom drive screw coupled with the special equalizer washer provides smooth operation while the proprietary heat treating extends its life 510 times longer than similar designs. Dimensions: 26 x 15 x 8 .

KD Tools Harmonic Balancer Puller Kit. Each $74.83 Manufacturer: KD Tools. Each. Features Benefits: Removes and installs the harmonic balancer on most popular Chrysler, Hyundai, and Mazda without removing the radiator Includes Puller Body Includes Pin Set Includes Holding Ring Packaged in a blow molded

KD Tools KDT41750 Harmonic Balancer Puller Kit $108.02 Features and Benefits:Removes and installs the harmonic balancer on most popular Chrysler Hyundai and Mazda without removing the radiatorIncludes Puller BodyIncludes Pin SetIncludes Holding RingPackaged in a blow molded case with laminated instruction cards or stickers integrated into case design for handy reference of application information

Master Compressor Clutch Puller Kit $245.95 ? Essential Kit for Safely Removing and Installing Compressor Clutches. ? Coverage for Domestic and Import Vehicles. ? Molded Case Included.By FJC.

Lisle Harmonic Balancer Puller Set. Each $148.95 Manufacturer: Lisle. Each. Features and Benefits This kit features the puller hardware and special pulling screws to remove most automotive harmonic balancers Updated jaw design on Damper Puller provides even greater strength Clevis pins allow jaws to be

Lisle LIS51700 Harmonic Balancer Puller Set $196.51 Features and Benefits This kit features the puller hardware and special pulling screws to remove most automotive harmonic balancers Updated jaw design on Damper Puller provides even greater strength Clevis pins allow jaws to be quickly removed and replaced For Chrysler GM Mitsubishi and Dodge Comes in a blow molded caseThe kit includes a standard harmonic balancer puller pulling screws and adapters for 3300 and 3800 GM V6 engines and our updated harmonic damper pulley puller for Chrysler GM Mitsubishi and Dodge. Shipping wt. 8 lb. Supercedes LIS49650.

K-D Tools Rear Axle Bearing Puller Kit $36.69 Three pullers designed to make the removal of semi-floating rear axle bearings easier on most domestic cars. Includes: 1 in. X 1-7/8 in. Puller, 1-5/16 in. X 2-2/8 in. Puller, 1-3/8 in. X 2-7/8 in. Puller. Packaged in a blow molded case with laminated instruction cards or stickers integrated into case design for handy reference of application information. Removeable hinged style lid allows for convenient storage in tool box drawers. Individual part numbers molded into case for easy reference. Applications: 1 in. X 1-7/8 in. Puller - fits minimum bearing tube I. D. Of 1 in. And maximum axle tube I. D. Of 1-7/8 in. 1-5/16 in. X 2-3/8 in. Puller - fits minimum bearing tube I. D. Of 1-5/16 in. And maximum axle tube I. D. Of 2-3/8 in. 1-3/8 in. X 2-7/8 in. Puller - fits minimum bearing tube I. D. Of 1-3/8 in. And maximum axle tube I. D. Of 2-7/8 in.

Comp Pump Brush Kit $17.99 Comp Pump Brush Kit; Internally Serviced Brushes;

Yoke Puller Kit For Heavy Duty Trucks $526.95 The Tiger Yoke Puller simplifies and expedites the removal of heavy-duty yokes on driveshafts, transmissions and rear-end differentials without damage to yokes or other components. Enginereed for use with a 1/2'' imact wrench. Fits full and half round yokes on Spicer and Meritor 1610, 1710, 1760, 1810 series, Spicer SPL 140, 170, 250 series and Meritor (Rockwell) RPL 20 and 25 series. ? CNC machined from billet chrome-moly steel. ? Heat treated and finished to provide maximum strength and wear resistance. ? Engineered and precision machined to provide maximum force. This puller easily generates 25,000lbs of pulling power. Tested and recommended by the Spicer Driveshaft Division of Dana Corporation.By Tiger Heavy Duty Tools.

Master Bolt Grip Kit - Multi-Use Puller Kit $68.95 ? Master Bolt Grip Kit works on harmonic balancers, steering wheels, crankshaft pulleys, and gears. Capable of handling almost every two or three-way bolt pull possible on most cars, pickups, SUVs, and small engines. Kit Contents: ? Two or three way yoke ? 4 pc. tip set ? Metric bolt set ? SAE bolt set ? Center screw for puller (2)By K-D Tools.

Lisle LIS38850 Pulley Puller / Installer $75.45 Removes and Installs Pressed on Power Steering Alternator and Air Pump Pulleys. Makes removing pressed on pulleys an easy job. This puller will remove and install pulleys on most GM Ford and Chrysler vehicles. Special adapters are included for GM 3.1 and Quad 4 engines. Works on traditional Vshaped pulleys and serpentine belt system pulleys. Tool comes with detailed instructions and a heavyduty plastic storage case.

Lisle Harmonic Balancer Puller GM $39.95 For GM 3300 And 3800 V6 Cylinder Engines.Removing the harmonic balancer on late model 3300 and 3800 V6 GMs requires pulling hardware much different than conventional pullers. The 45300 is equipped with the special bolts and adapters to pull the harmonic balancer cleanly without damage to the crank sensor. Order the 45350 Retrofit Kit to use with your Lisle 45500 Harmonic Balancer Puller.

H and S Auto Shot Uni-Puller T-Handle Slidehammer Service/Repair Kit. Each $31.49 Manufacturer: H and S Auto Shot. Each. Features and Benefits: Kit includes collet (jaws), o-ring, and spring for servicing your Uni-Puller Customers also search for: Discount H And S Auto Shot Uni-Puller T-Handle Slidehammer Service/Repair Kit, Buy H An

Lisle No Slip Pulley Puller Set $74.95 Removes and installs pressed on power steering, alternator and air pump pulleys Completely houses the pulley hub to prevent slipping on even the tightest pulleys Fits most domestic models including GM 3.1 and Quad 4 engines Works on traditional V shaped pulleys and serpentine belt system pulleys Works faster than other conventional pulley pullers   Includes: Handle Pusher shaft Jaw assembly Short 3/8-16 installer adapter Short 8mm installer adapter Medium 3/8-16 installer adapter Short pin Long pin Long 3/8-16 installer adapter Puller screw