Piece Hvlp Spray

Piece Hvlp Spray

Bumper Scratch Prep

Preparing a bumper scratch before painting is one of the more important stages of repair. It involves removing all surface scratches, chips and blemishes creating a smooth surface for the paint to be applied. It is considered to be an important stage of a body repair for if it's done incorrectly you will notice a poor and inconsistent finish after the paint and lacquer is applied. Other problems that are a direct result of poor preparation work are flaking paint and rough surface finish. In this article I will provide basic knowledge and information on carrying out standard prep work on a bumper scratch/bumper scuff.

Clean the repair area

The first stage of prep work on a bumper scratch or scuff would be to clean the damaged area. This will remove any dirt, silicon and cru stations from the area that is to be painted. A good alcohol based cleaner should serfice. Once the area has been cleaned the next stage is to flatten of any rough edges of the scratch.

Flatten off scratches

Flatten of the bumper scratches with some wet and dry paper or sand paper equivalent to remove any loose or rough edges from the scratches.

Fill the scratch

Once the scratches have been smoothed off mix some filler with some hardener and push the mixture into the bumper scratches with a razor blade, and leave to dry. Mask up around all sections that you don't want sprayed with tape and newspaper. Once the filler mixture has dried rub back with some course wet and dry paper until the filler is level with the surface. Next apply some primer to the area (either with a HVLP gun or spray can) and leave to dry. Once dried rub back again with some medium wet and dry paper until level with the surface, this will help fill in all those smaller scratches and chips. Repeat the application of primer until all minor scratches are filled and smooth to the surface. Dry off the repair and use an fine abrasive scotching pad and gently rough up the area that is to be sprayed, this will help adhere the paint to the repair.

Prepare for spraying

Finally use a tack rag or tack cloth to remove any remaining pieces of lint, dust or residue to prepare the prepped surface for painting.

Finally

Make sure you read all instructions of the products that you use and wear the appropriate protective items that they require.

 

About the Author

2 Piece HVLP Spray Gun Set $59.95 With these 3-piece HVLP gravity feed spray gun sets from Performance Tool, you'll be able to tackle a variety of jobs. Each set includes a small HVLP spray gun with a 200cc paint cup and 1.2mm needle and nozzle that will produce a 2 in. x 6.5 in. spray pattern. They also include a large HVLP gun with a 600cc paint cup and 1.5mm needle and nozzle with a 3 in. x 7 in. spray pattern, and a pressure regulator with a gauge.     Includes: 600cc Paint Cup with 1.5mm Needle and Nozzle 200cc Paint Cup with 1.2mm Needle and Nozzle Regulator with gauge Connectors Multi Wrench Cleaning Brush

ATD Tools ATD6900 9 Piece HVLP Spray Gun Set $120.84 ATD6900. 9Piece HVLP Spray Gun Set. Guns have stainless steel needle and nozzle setsKnob for spray pattern adjustmentOperating pressures of 1545 psiAir inlet: 1/4 Air consumption: 7.0 to 9.0 CFM. Contains:(1) 1.8mm Primer spray gun(ATD6902)(1) 1.4mm Topcoat spray gun (ATD6901)(1) 1.0mm Touchup spray gun(ATD6903)(2) 1L Aluminum cups (ATD690009 ATD690008 Lid for cup)(1) 125cc Stainless steel cup (ATD690021 ATD690020 Lid for cup)(1) Locking pressure regulator (0180 psi 012 BAR)(1) Face maskCleaning kit:(1) Spanner wrench(1) Hex wrench(1) Brush(2) Filters

AmStar Deluxe 4 Piece HVLP Spray Gun Kit $697.95 Gun setups in one kit to cover all your painting needs primer/filler to top coats HVLP for less overspray and wasted paint Stainless steel needle and nozzle sets Sturdy aluminum storage case included Pressure regulator with gauge locks desired setting in P.S.I. for precise air pressure Air Consumption: 7.0-9.0 CFM   Kit Includes: 1.0mm Detail Gun for lighter materials and touch up work 1.4mm Color and Top Coat Gun for lighter materials such as high quality bases and clear coats 1.7mm Primer/Filler Gun for heavier materials such as primers, surfacers and fillers Accessories: - (2) 1-Liter Aluminum Cups - 150CC Stainless Paint Cup - Pressure Regulator - Filter - Spanner - Brush

HVLP Spray Gun $39.95 All purpose gun sprays primers, base coats, sealer and clear coats Lightweight, comfortable grip Fully adjustable spray pattern 20 ounce drip-free cup 1.4 mm brass nozzle spray nozzle Stainless steel needle 3-7 inch spray pattern with regulator and hanger with 0-80 psi gauge Includes a multi-wrench and a cleaning brush

Sharpe FX3000 HVLP Spray Gun. Each $120.59 Manufacturer: Sharpe Manufacturing. Each. Features and Benefits Includes 600 cc aluminum cup, wrench and cleaning brush Large pattern size, up to 12.5" A HVLP gun with multiple nozzles ranging from 1.0 to 1.8 to spray primer, base, and clear PPS adapter

Factory Reconditioned Graco HV2900USG 39 CFM HVLP Paint Spray Station $74.99 39 CFM HVLP Paint Spray Station - HV2900USG. Precision Spray Gun. 1 Quart Wide Mouth Paint Container. 13-ft Hose. Filter. 2mm Brass Stain/Latex Tip. How To DVD

Factory Reconditioned Graco HV1900USG 32 CFM HVLP Paint Spray Station $49.99 32 CFM HVLP Paint Spray Station - HV1900USG. Standard Lightweight Spray Gun. 6 Quart Paint Container. 6-ft Hose. Filter. 2mm Brass Stain/Latex Tip. Shoulder Strap. How To DVD

Sharpe Manufacturing SHA288879 FX3000 HVLP Spray Gun 1.3mm $174.08 Features and Benefits Large spray pattern size up to 12.5 1.3mm nozzle recommended usage: base coat high solid single stages clear coat Includes FX3000 gun 600cc aluminum cup wrench and cleaning brush Includes one year warranty Repair kits availableThe FX3000 is a full size HVLP spray gun for larger jobs and the gun of choice when HVLP is required. Other features include: best in class atomization and largest spray pattern easily repairable and lightweight and ergonomic. Specifications air consumption: 9.5 scfm; maximum Inlet HVLP psi: 29; Finish: Black Nickel.

Iwata IWA5553 LPH400144LV Fravity Fed HVLP Spray GunCup PCG10DM $797.48 The Iwata 5553 is High performance center post gravity fed HVLP spray gun with low air consumption and superior atomization. Usage: Base Coat Clear Coat Single Stage Woodwork Metal.

Sharpe Manufacturing SHA288880 FX3000 HVLP Spray Gun 1.4mm $174.08 Features and Benefits Large pattern size up to 12.5 1.4mm nozzle recommended usage: base coat clear coat single stages sealers low solid clear clear coat Includes FX3000 gun 600cc aluminum cup wrench and cleaning brush Includes one year warranty Repair kits availableThe FX3000 is a full size HVLP spray gun for larger jobs and the gun of choice when HVLP is required. Other features include: best in class atomization and largest spray pattern easily repairable and lightweight and ergonomic. Specifications air consumption: 9.5 scfm; maximum Inlet HVLP psi: 29; Finish: Black Nickel.

Iwata AZ3HV2-13GC HVLP Spray Gun with 1.3 Nozzle. Each $145.07 Manufacturer: Iwata. Each. Features and Benefits: Redesigned performance Low cost affordable spray gun New ergonomic lighter body Soft trigger pull to reduce fatigue New polished surface for easier clean up An affordable center post gravity HVLP spray gu

Iwata AZ3HV2-15GC HVLP Spray Gun with 1.5 Nozzle. Each $145.07 Manufacturer: Iwata. Each. Features and Benefits: Redesigned performance Low cost affordable spray gun New ergonomic lighter body Soft trigger pull to reduce fatigue New polished surface for easier clean up An affordable center post gravity HVLP spray gu

Iwata AZ3HV2-18GC HVLP Spray Gun with 1.8 Nozzle. Each $145.07 Manufacturer: Iwata. Each. Features and Benefits: Redesigned performance Low cost affordable spray gun New ergonomic lighter body Soft trigger pull to reduce fatigue New polished surface for easier clean up An affordable center post gravity HVLP spray gu

Iwata AZ3HV2-20GC HVLP Spray Gun with 2.0 Nozzle. Each $145.07 Manufacturer: Iwata. Each. Features and Benefits: Redesigned performance Low cost affordable spray gun New ergonomic lighter body Soft trigger pull to reduce fatigue New polished surface for easier clean up An affordable center post gravity HVLP spray gu

Sharpe SHP288882 FX3000 HVLP Paint Spray Gun 1.8mm $177.08 The FX3000 is a full size HVLP spray gun for larger jobs and the gun of choice when HVLP is required.Innovations of the Finex gun include 29 fewer parts precision lids repair kits optional 3M PPS adapter optional interchangeable aluminum cups and lowest trigger pull among all guns in its class. Base coat clear coat single stages sealers low solid clear clear coat. Includes: FX3000 gun 600cc aluminum cup wrench and cleaning brush. One year warranty

Sharpe SHP288880 FX3000 HVLP Paint Spray Gun 1.4mm $177.08 The FX3000 is a full size HVLP spray gun for larger jobs and the gun of choice when HVLP is required.Innovations of the Finex gun include 29 fewer parts precision lids repair kits optional 3M PPS adapter optional interchangeable aluminum cups and lowest trigger pull among all guns in its class. Base coat clear coat single stages sealers low solid clear clear coat. Includes: FX3000 gun 600cc aluminum cup wrench and cleaning brush. One year warranty

Iwata LPH200-126LVP Pressure Fed HVLP Spray Gun. Each $541.34 Manufacturer: Iwata. Each. Features and Benefits LV technology for fine atomization and less overspray LV technology will put more material in the pattern thus reducing costs Lightweight HVLP spray gun Pressure fed LV technology makes this gun more envir

Iwata LPH400-144LV HVLP Spray Gun with 700 ml Aluminum Cup. Each $636.84 Manufacturer: Iwata. Each. Features and Benefits LV technology for more material in pattern and less overspray, and fine atomization 11.4" pattern Low air consumption of 9.5 cfm Superior atomization Center post gravity fed HVLP spray gun LPH400 high perf

Wagner Spray Tech. Wagner Spray Tech. Cntrl Spray Hvlp Sprayer 0417005 $76.83 Cntrl spray hvlp sprayer Uses HVLP air technology to spray lacquers, stains, enamels, and urethanes with maximum control and lower overspray than traditional sprayers Pattern shapes can be changed from vertical or horizontal fan patterns for larger surfaces to round patterns for more detail work Material size and flow rate are adjustable at the trigger Sprayable materials include deck stains, clear wood sealers, waterproofers and enamels Great for deck railings, yard play sets, kids toys, and yard furniture Features: Maximum control, low overspray, 3 pattern shapes, and variable flow control Provides 4 P.S.I. at 40 cfm with 90% transfer efficiency Brand #: Wagner Spray Tech. 0417005 UPC: 024964169887 Keywords: paint sprayer air control hvlp deck stain waterproofing wood sealer

Iwata IWA4926 LPH80104G HVLP Mini Spray Gun With 150 ML Cup $520.1 HVLP miniature center post spray gun. It s spray patterns range from 1.6 round pattern to a full 5.5 fan pattern which makes it ideal for large backgrounds spot repair blending shading and touch up. Low operating air pressure and low 1.8 CFM allow the LPH80 to run with small air compressors perfect for mobile repair .

Iwata IWA5640 LPH400134LV Center Post Gravity Feed HVLP Spray Gun $805.14 LPH400 high performance center post gravity fed HVLP spray gun comes with 1.3 nozzle size. This spray gun comes with Iwata s patented LV technology providing fine atomization less overspray and thus is environmentally friendly. LV Technology for fine atomization and less overspray. Low air consumption operates on 9.5 CFM. Superior atomization. Applicable in solvent or waterborne products. Designed for Base and Clear coat single stage products.

0417005 - Control Spray Hvlp Sprayer $86.26 [6749725] UPC: 024964169245 33L x 11.38W x 11.25H 4.5 LB 2.44 Cubes

Starting Line Hvlp Mini Spray Gun - 1.0Mm Tip $102.95 ? Value priced mini HVLP detail gun ? 1.0mm fluid tip is suitable for a spraying a variety of materials. ? Includes cleaning brush and wrench ? 30 PSI inlet pressure delivers 10 PSI at the air cap; 8 CFM air consumption. ? Comes with Devilbiss 1 Year Limited WarrantyBy DeVilbiss Auto Refinish Products.

Iwata IWA9231 AZ3HV215GC HVLP Spray Gun with 1.5 Nozzle $191.01 The New AirGunsa guns from Anest Iwata have been redesigned for performance. These low cost affordable guns include a ergonomic lighter body with a softer trigger pull to reduce fatigue. The new polished surface allows for easier cleanup. An affordable center post gravity HVLP spray gun. Nozzle Size: 1.5. Usage: Sealer. Dimension: 6.25 W x 9 L x 5.25 H.

Iwata IWA9233 AZ3HV220GC HVLP Spray Gun with 2.0 Nozzle $191.01 The New AirGunsa guns from Anest Iwata have been redesigned for performance. These low cost affordable guns include a ergonomic lighter body with a softer trigger pull to reduce fatigue. The new polished surface allows for easier cleanup. An affordable center post gravity HVLP spray gun. Nozzle Size: 2.0. Usage: HS Primer. Dimension: 6.2 W x 9 L x 5.2 H.

Iwata IWA9230 AZ3HV213GC HVLP Spray Gun with 1.3 Nozzle $172.48 The New AirGunsa guns from Anest Iwata have been redesigned for performance. These low cost affordable guns include a ergonomic lighter body with a softer trigger pull to reduce fatigue. The new polished surface allows for easier cleanup. An affordable center post gravity HVLP spray gun. Nozzle Size: 1.5. Usage: Sealer. Dimension: 6.2 W x 9 L x 5.2 H.

Sharpe FX3000 HVLP Spray Gun (1.3mm). Each $125.43 Manufacturer: Sharpe Manufacturing. Each. Features and Benefits Large spray pattern size, up to 12.5 1.3mm nozzle recommended usage: base coat, high solid, single stages, clear coat Includes FX3000 gun, 600cc aluminum cup, wrench and cleaning brush Incl

Iwata IWA5276 LPH50102G HVLP Spray Gun With Side Mounted 130 ML Cup $578.1 The LPH50 is a high performance miniature HVLP spray gun with side mounted cup. This gun offers superior atomization with low air consumption for small touch up work and custom painting. This gun can also adapt to a side mounted airbrush bottle for custom work. Miniature high performance gravity feed (HVLP) spray gun provides ideal spray control when blending or shading. Side mounted gravity cup allowing 360 degree rotation gives the operator options to spray at a wide variety of angles. Featuring adjustable spray pattern from round to fullfan shape while producing spray patterns from 1/8 up to 4 . Miniature spray gun adaptable to small touch up work or custom painting. Spray pattern can open to 3.9 inches. Side mounted cup for easy viewing of target. Low air consumption operates on 1.8 CFM. Superior atomization.

Gti Millenium Hvlp Gravity Feed Spray Gun $389.95 ? Advanced technology for the professional painter ? Precision engineered #2000 gold air cap - meets exacting performance demands, producing extremely fine finish with all materials ? Even distribution of metallics for no mottling or striping - Excellent color matching capabilities ? 30 PSI inlet pressure delivers 10 psi at the air cap and 15.5 cfm ? Includes: 1.3mm, 1.4mm, and 1.5mm fluid tips, 32 oz. aluminum cup, Air adjusting valve with gauge, air cap cleaining kit, spray lube, fluid filter, gun hook, & (9) E-Z Liner? disposable cup linersBy DeVilbiss Auto Refinish Products.

Amstar Deluxe 4 Pc. HVLP Spray Gun Kit With Aluminum Case $122.95 ? Gun Setups in One Kit to cover all your painting needs - Primer/Filler to Top Coats? HVLP for less overspray and wasted paint? Stainless Steel Needle and Nozzle Sets? Sturdy Aluminum Storage Case included? Pressure regulator with gauge locks desired setting in P.S.I. for precise air pressure? Air Consumption: 7.0-9.0 CFMKit Includes:? 1.0mm Detail Gun for lighter materials & touch up work? 1.4mm Color and Top Coat Gun for lighter materials such as high quality bases and clear coats? 1.7mm Primer/Filler Gun for heavier materials such as primers, surfacers and fillers? Accessories: (2) 1-Liter Aluminum Cups; 150CC Stainless Paint Cup; Pressure Regulator; Filter; Spanner; Brush

Sharpe FX3000 HVLP Spray Gun (1.4mm). Each $120.59 Manufacturer: Sharpe Manufacturing. Each. Features and Benefits Large pattern size, up to 12.5 1.4mm nozzle recommended usage: base coat, clear coat single stages, sealers, low solid clear, clear coat Includes FX3000 gun, 600cc aluminum cup, wrench and

Devilbiss ITW FLG-647-WB HVLP Finishline Waterborne Spray Gun Value Kit. Each $217.88 Manufacturer: Devilbiss. Each. Features and Benefits: Multiple fluid tips included 1.3, 1.5, 1.8mm High grade stainless steel parts Easy to clean, blue anodized finish Includes 20 oz. Acetal cup Includes air adjusting valve with gauge The FLG-647-WB HVLP

Mountain Detail Gravity Feed .8 mm HVLP Spray Gun. Each $70.58 Manufacturer: Mountain. Each. Features Benefits: Very low over spray and fine atomization Stainless steel needle fluid tip Plastic cup 38-44 PSI 10 CFM Air Inlet: 1/4" Compressor: 3HP Max pattern at 8" distance -- 9-10 1/2" Customers also search for: D

Alltrade Tools 840761 Kawasaki HVLP Detail Spray Gun $34.53 For precision painting with less overspray and waste.A Superfine 0.8mm nozzle sprays most material (thinning required on higher viscosityAfluids).AAAdjustable flow rate pressureAand spray pattern.AA10 oz. cup capacity.AA Diecast aluminum gun andAplastic cup reduces weight and user fatigue.A Requires 4358 PSIAinlet pressure for proper operation.A .25 in. NPS air inlet. 3/8 in. air hose recommended.A One year warranty.A

Amstar Ams4000 Deluxe 4 Pc. Hvlp Spray Gun Kit With Aluminum Case $133.87 Gun Setups in One Kit to cover all your painting needs Primer/Filler to Top Coats. HVLP for less overspray and wasted paint. Stainless Steel Needle and Nozzle Sets. Sturdy Aluminum Storage Case included. Pressure regulator with gauge locks desired setting in P.S.I. for precise air pressure. Air Consumption: 7.09.0 CFM. Kit Includes:. 1.0mm Detail Gun for lighter materials and touch up work. 1.4mm Color and Top Coat Gun for lighter materials such as high quality bases and clear coats. 1.7mm Primer/Filler Gun for heavier materials such as primers surfacers and fillers.

Mountain MTN4052 HVLP Gravity Feed Spray Gun 0.8mm Nozzle $101.77 Features and Benefits: Gravity feed action lets fluid flow downward using less air and offering better control over atomization and fluid output General purpose air cap sprays enamels lacquers metallics and urethane and handles a range of viscocities from fine surface finish to heavy body coatings Forged aluminum gun body and air cap for durability and long lasting performance Nylon cup with drip check device to prevent spillage from the vent hole Stainless steel needle and fluid tipSpecifications: Use for spot repair and detail painting jobs 0.13L plastic cup Maximum spray pattern approximately 4 Operating pressure: 30 PSI Avg. air consumption: 10 cfm Air inlet thread size: 1/4 NPT

Campbell Hausfeld HV0126 HVLP Turbine Engine Filter $19.99 HVLP Turbine Engine Filter - HV0126