Installer Locking Holder

Installer Locking Holder

Door Holders Provide Secure Control at Entrances and Exits

Doors are designed to open and close in order to control traffic and building environment. Sometimes a door needs to be held open for an extended period of time. The best solution in commercial applications is to invest in an overhead door holder or stop. These devices are designed to lock a door open securely until the locking mechanism is released. When choosing overhead holders and stops, take note of door design and how frequently it will be locked open.

Holders and stops can be designed as interior/exterior or as only one or the other. Exterior applications or installations in any environment where corrosion may be a factor require holders/stops constructed of stainless steel or brass. Steel is acceptable in interior installations, although many users consider brass designs more attractive. Make sure you purchase the appropriate mechanism for your application.

The most effective holders and stops are surface-mounted. These allow the user to easily and quickly lock the door open and then release it through the use of a thumbturn. The best designs allow the hold-open feature to be turned on and off. The user can preset the mechanism to act only as a door stop or as a hold open when the door is fully open. In addition, look for overhead holders that allow dead-stop templating; this feature allows the holder to be set to stop opening once it reaches a particular point. For example, the user could set the door to never open beyond 110 degrees. This prevents the door from swinging open wildly and banging into a wall or another door installed back-to-back.

Surface-mounted overhead door holders/stops should be purchased to match the door size and usage. Most models will use specifications such as industrial use, heavy-duty, high-traffic, medium- or light-duty. Work with closely with the supplier to make sure you get the right product for your application. Also, be sure to specify whether you need a stop only or and hold-and-stop mechanism.

Finish may not be a concern in industrial applications, but retail buildings, hospitals, schools, and entertainment venues may want to use door holders and stops that complement the architecture of the facility. Luckily, the finest holders and stops come in a variety of finishes, including satin stainless steel, polished stainless steel, chrome coating, polished brass, satin brass, satin bronze and oil-rubbed bronze.

Finally, if your holders/stops will be installed on fire doors, you must be sure to find models that are UL labeled as “miscellaneous fire door accessories.” This ensures that the hardware does not in any way adversely impact the fire rating of the door.

About the Author

Glynn-Johnson holders/openers are some of the best in the industry. Buy the 81 Series heavy-duty models at Popular Hardware. Amy Garner is a freelance writer in Oklahoma who writes on a variety of business topics.

Ram Mount / RAM Mount Apple iPad Locking Holder / RAM-HOL-AP8LU $59.95 Ram Mount - RAM Mount Apple iPad Locking Holder - RAM-HOL-AP8LU

Lisle Locking Air Tool Holder $20.95 Organize your air tools with this lockable tool holder. It can hold up to five pneumatic tools in a 10" space. Comes with five slots that fit all popular quick connect fittings from Milton, Lincoln, Amflo and others. Can be mounted on a tool box, cart or wall for easy access. Locking feature protects your air tools from theft (provide your own lock). Durable powder-coated finish.     Tool In Use:

Mastercool MSC91490 Standard Valve Core Remover / Installer $48.43 Features and Benefits: Sturdy ball valve design controls refrigerant flow with 1/4 turn of the valve lever Lever position also gives visual indication of whether valve is opened or closedThis tool allows the user to service valve cores without losing the systems charge. Mastercool s new unique design offers a patented locking device that holds the shaft in place while removing or installing the valve core. This remover/installer makes removal or insertion much easier.

MMF Locking Security Bag With Label Holder $25.99 0% 1 1 Each 11" Height x 8.50" Width 233110808 8.50" Locking Security Bag is perfect for the night deposit. Made of laminated nylon with brown simulated leather grips on both ends of the bag. Bag features a seven-pin lock to secure money and belongings. Brown leatherette vinyl pocket with clear window on front holds a 3"x 4" index card that you can change every night to identify contents. Currency Bag Deposit Locking Security Bag With Label Holder MMF MMF Industries Navy No Nylon Secure www.mmfind.com

Lisle LIS49960 Locking Air Tool Holder $37.51 Features and Benefits. Fits all popular quick connect fittings. Holds five pneumatic tools in a 10 space. Locking feature protects air tools from theft. Durable powdercoated finish. Can be mounted on a tool box cart or wall for easy accessOrganize your air tools with this lockable tool holder. Tool can hold up to five pneumatic tools in a 10 space. Comes with five slots to fit all popular quick connect fittings from Milton Lincoln Amflo and others.nbsp;

KD Tools KDT492 Oil Seal Remover/Installer $47.15 Features and Benefits: Release of locking mechanism on all 4 sizes: A (3/4 ); B (5/8 ); C (1/2 ) and D (3/8 ) Use with Ford air conditioning or fuel line spring locksThis is a very handy tool to have when working with Ford airconditioning or fuel line spring locks. Most Ford vehicles are equipped with spring lock couplings. This tool is the necessary for the release of locking mechanism on all 4 sizes: A (3/4 ); B (5/8 ); C (1/2 ) and D (3/8 ). Do not use with engine running. Release system pressure before disconnecting coupling.

Sunex Extra Large Locking Screwdriver/Pry Bar Holder. Each $37.04 Manufacturer: Sunex. Each. Features Benefits: Will work with most all service carts Dimensions: 16" x 11" x 3.75" Weight: 8.5 lbs. Customers also search for: Discount Extra Large Locking Screwdriver/Pry Bar Holder, Buy Extra Large Locking Screwdriver/

Lisle Locking Air Tool Holder. Each $22.18 Manufacturer: Lisle. Each. Features and Benefits Fits all popular quick connect fittings Holds five pneumatic tools in a 10"" space Locking feature protects air tools from theft Durable powder-coated finish Can be mounted on a tool box, cart or wall for

Ultimate Locking Console by Rugged Ridge $117.99 1976-95 YJ Wrangler and CJ;Spice;Fully lined locking storage area;Built-in cup holders;Removable 6 can cooler;Sunglass holder

Mastercool MSC58490 Universal A/C Valve Core Remover and Installer Kit R12 / R134a $203.56 Features and Benefits: These tools allow the user to service valve cores without losing the systems charge This remover/installer kit makes removal or insertion much easier especially on the larger R134A valve cores Mastercool s new unique design offers a locking device (patent pending) that holds the shaft in place while removing or installing the valve core Less down time saves money All packaged in a plastic molded box The 58490 Universal R12/RI34A Master Kit includes: valve assembly R134A high side 16mm connector R134a low side 13mm connector 1/4 FL swivel connector standard valve core remover/installer assembly GM large bore valve core remover/installer assembly JRA R134A valve core remover/installer assembly Eaton R134A low side valve core remover/installer assembly Eaton R134A high side valve core remover/installer assembly Adapter 1/4 M x 3/16 F high side GM/Ford adapter 1/4 M x 1/8 F high side all packaged in a plastic molded box.

Service Cart With Locking Top And Locking Drawer - Blue $449.95 Complete unit comes with accessories 8016, 8011, 8004, and 8014 included The locking drawer and locking top are keyed the same, so the user only has one set of keys Clip-on roller-bearing slides on drawer Large, easy to maneuver 4'' wheels: 2 locking and 2 standard Chrome 16 gauge steel frame Durable powder coated finish 3'' deep shelves Load Capacity (Lbs.): 350 3 Drawer Unit For Service Cart (8016) has clip-on roller-bearing slides Attaches to 8005SC & 8013A and most other carts Up to 2 units can be installed on the same cart Durable powder coated finish Drawer dimensions: Small Drawers: 1.5'' deep x 15'' long x 12.25'' wide; Large Drawer: 1.5'' deep x 15'' long x 26.5'' wide Large Locking Screwdriver/Pry Bar Holder (8011) Easily attaches onto the side of the 8013A, 8005SC, and 8003SC Service Carts or any cart or tool box Locking for more secure tool storage - Two keys come with holder Large capacity for a greater number of hand tools - 26 individual storage slots Side Work Bench (8004) folds down when not in use for storage 30 lb. capacity Leg extensions (8014) add 4.75'' to the height of cart Use to maintain shelf clearance when adding additional drawer units Easy to install By Sunex International. NOTE: Cart does not come with drawer liners pictured in photograph.

Service Cart With Locking Top And Locking Drawer - Red $449.95 Complete unit comes with accessories 8016, 8011, 8004, and 8014 included The locking drawer and locking top are keyed the same, so the user only has one set of keys Clip-on roller-bearing slides on drawer Large, easy to maneuver 4'' wheels: 2 locking and 2 standard Chrome 16 gauge steel frame Durable powder coated finish 3'' deep shelves Load Capacity (Lbs.): 350 3 Drawer Unit For Service Cart (8016) has clip-on roller-bearing slides Attaches to 8005SC & 8013A and most other carts Up to 2 units can be installed on the same cart Durable powder coated finish Drawer dimensions: Small Drawers: 1.5'' deep x 15'' long x 12.25'' wide; Large Drawer: 1.5'' deep x 15'' long x 26.5'' wide Large Locking Screwdriver/Pry Bar Holder (8011) Easily attaches onto the side of the 8013A, 8005SC, and 8003SC Service Carts or any cart or tool box Locking for more secure tool storage - Two keys come with holder Large capacity for a greater number of hand tools - 26 individual storage slots Side Work Bench (8004) folds down when not in use for storage 30 lb. capacity Leg extensions (8014) add 4.75'' to the height of cart Use to maintain shelf clearance when adding additional drawer units Easy to install Sunex International NOTE: Cart does not come with drawer liners pictured in photograph.

RAM MOUNT RAMHOLAP8LU Apple Ipad and Ipad 2 Locking Holder $75.55 RAM high strength composite cradle with dial combination lock for the Apple iPad.This cradle is designed to hold the following devices:Apple iPad WiFi 16GB 32GB and 64GBApple iPad WiFi + 3G 16GB 32GB and 64GBFeatures:1. Easy access to electronic ports2. Dial combination lock3. (4 qty) mounting points with predrilled holes including the universal AMPS hole pattern.Material:High Strength Composite. Product : RAM MOUNT APPLE IPAD LOCKING HOLDER. Manufacturer : RAM MOUNT. Manufacturer Part No : RAMHOLAP8LU. UPC : 793442928598

Locking In $24.99 Locking In - Photographic Print

Locking Stor-A-Key $6.07 This simple, secure key holder lets you hide your house or car key in a discreet spot for emergency access or just as a spare. Type: Security & Motion

Portable Locking Stor-A-Key $7.4 This portable, secure key holder lets you hide your house or car key in a discreet spot for emergency access or just as a spare. Type: Security & Motion

Balt Locking Computer Workstation $248.99 0% 0.75" Thick 1 1 Each 1 x CPU Holder 1 x Drawer for Keyboard 14.50" Width x 21.75" Height - CPU Bay 22" Width x 10.50" Depth - Keyboard Drawer 89843 Locking CPU cabinet features molded plastic keyboard tray with a pen and pencil holder, and large black laminate CPU bay. Design offers a 3/4" thick top with teak laminate finish, 16 gauge steel base with black powder-coat finish and grommet holes for cable management through top, legs and CPU bay. Pullout keyboard drawer measures 22" wide x 10-1/2" deep. CPU bay measures 14-1/2" wide x 21-3/4" high. Balt Black Cord Management Grommet - Base Laminated Locking Computer Workstation MooreCo, Inc No Plastic Plastic - Keyboard Tray Powder Coated Powder Coated - Base Steel Steel Base Teak Teak Top Workstation Yes www.moorecoinc.com

Sunex SUN8011BK Extra Large Locking ScrewdriverPrybar Holder for Service Cart Black $67.66 Attaches to SUN8003SC SUN8005SC and SUN8013A and most other carts. Holds up to 26 items. 3 different hole sizes. Locking lid for security. Durable powder coat finish.

Sunex SUN8011 Extra Large Locking Screwdriver / Pry Bar Holder $53.3 Attaches to SUN8003SC SUN8005SC and SUN8013A and most other carts. Holds up to 26 items. 3 different hole sizes. Locking lid for security. Durable powder coat finish. Dimension: 16 x 11 x 3.75 .

Sunex Tools 8011 26Pc Locking Pry Bar Holder Red $50.43 Attaches to 8003SC 8005SC amp; 8013A and most other carts. Holds up to 26 items with 3 different hole sizes forconvenience. Locking lid for security. Durable powder coated finish

Billing Boats USA PPV2002 Sliding Locking Holder $24.29 Billing Boats has been a market leader in the USA since 1965 with over 400 000 model boat kit varieties sold. These model boat kits are renowned for their authenticity and quality and are highly sought after by model and hobby boat enthusiasts the world over. Our Billing Boats products are your one stop source for consumers museums and hobby shop retailers interested in purchasing our quality model boats hobby tools craft tools model boat fittings and accessories.all metal clamp' hand held' up to 1.5mm. Jaws

Holder $1.2 Holder

Startech.com / PROFESSIONAL NETWORK INSTALLER / CTK400LAN $169.58 Startech.com - PROFESSIONAL NETWORK INSTALLER - CTK400LAN

Krups GX610050 Die Cast Conical Burr Grinder, Transparent Bean Hopper with Lid, Holds up to 8oz of Ground Coffee, Self Locking, Exchangeable Holder $139.99 Krups GX610050 Die Cast Conical Burr Grinder, Transparent Bean Hopper with Lid, Holds up to 8oz of Ground Coffee, Self Locking, Exchangeable Holder

RB Wire HOLDERSINGLE3L Chemical Bottle Holder with Locking Lid $34.49 These Chemical holders will accommodate three 3 liter bottles. Units are made from sturdy 7 guage wire and come with locking lids locks not included. These holders are powder coated with a tough white finish that can be easily cleaned. Plastic wall anchors and mounting screws are included.

Sunex SUN8013ABLDLX Service Cart with Locking Top and Locking Drawer Blue $497.98 The locking drawer and locking top are keyed the same so the user only has one set of keys. Rollerbearing slides on drawer. Large easy to maneuver 4 wheels: 2 locking and 2 standard. Chrome 16 gauge steel frame. Durable powder coated finish. 3 deep shelves. Load Capacity (Lbs.): 350. Drawer dimensions: Small Drawers: 1.5 deep x 15 long x 12.25 wide; Large Drawer: 1.5 deep x 15 long x 26.5 wide. Large Locking Screwdriver/Pry Bar Holder (8011) Easily attaches onto the side of the service cart. Locking for more secure tool storage Two keys come with screwdriver holder. Large capacity for a greater number of hand tools 26 individual storage slots. Side Work Bench (8004) folds down when not in use for storage; 30 lb. capacityNOTE: Cart does not come with drawer liners pictured in photograph.

Sunex SUN8013ADLX Service Cart with Locking Top and Locking Drawer Red $497.98 The locking drawer and locking top are keyed the same so the user only has one set of keys. Rollerbearing slides on drawer. Large easy to maneuver 4 wheels: 2 locking and 2 standard. Chrome 16 gauge steel frame. Durable powder coated finish. 3 deep shelves. Load Capacity (Lbs.): 350. Drawer dimensions: Small Drawers: 1.5 deep x 15 long x 12.25 wide; Large Drawer: 1.5 deep x 15 long x 26.5 wide. Large Locking Screwdriver/Pry Bar Holder (8011) Easily attaches onto the side of the service cart. Locking for more secure tool storage Two keys come with screwdriver holder. Large capacity for a greater number of hand tools 26 individual storage slots. Side Work Bench (8004) folds down when not in use for storage; 30 lb. capacityNOTE: Cart does not come with drawer liners pictured in photograph.

Sunex SUN8013ABKDLX Service Cart With Locking Top and Locking Drawer Black $497.98 The locking drawer and locking top are keyed the same so the user only has one set of keys. Rollerbearing slides on drawer. Large easy to maneuver 4 wheels: 2 locking and 2 standard. Chrome 16 gauge steel frame. Durable powder coated finish. 3 deep shelves. Load Capacity (Lbs.): 350. Drawer dimensions: Small Drawers: 1.5 deep x 15 long x 12.25 wide; Large Drawer: 1.5 deep x 15 long x 26.5 wide. Large Locking Screwdriver/Pry Bar Holder (8011) Easily attaches onto the side of the service cart. Locking for more secure tool storage Two keys come with screwdriver holder. Large capacity for a greater number of hand tools 26 individual storage slots. Side Work Bench (8004) folds down when not in use for storage; 30 lb. capacityNOTE: Cart does not come with drawer liners pictured in photograph.

Universal Transparent Deluxe Locking Project File with CD ROM Holder, 9 x 12, Clear, 25/Pack. Pack of 25 $11.8 Manufacturer: Universal Office Products. Pack of 25. Transparent Deluxe Locking Project File with CD-ROM Holder Clear 9 x 12 file jackets protect and store loose and odd-sized papers, yet keep them visible. Non-expanding jackets hold 50 sheets of paper. S

17600 - Top Performance Dxl Locking D-Ring Binder With Label Holder, 5 inch Capacity, Black $37.95 patented Flexaround Construction Prevents Top-loading Sheet Protectors And Oversize Indexes From Extending Outside Binder. Features Locking Angle-d Rings, Curved Spine, Inside Front Pocket, Spine Label Holder And Sheet Lifters. [SAM17600] Recycled UPC: 050362176004 UNSPC: 44122003 2.83 LB

17690 - Top Performance Dxl Locking D-Ring Binder With Label Holder, 4 inch Capacity, Black $20.71 patented Flexaround Construction Prevents Top-loading Sheet Protectors And Oversize Indexes From Extending Outside Binder. Features Locking Angle-d Rings, Curved Spine, Inside Front Pocket, Spine Label Holder And Sheet Lifters. [SAM17690] Recycled UPC: 050362176905 UNSPC: 44122003 2.5 LB

17680 - Top Performance Dxl Locking D-Ring Binder With Label Holder, 3 inch Capacity, Black $15.8 patented Flexaround Construction Prevents Top-loading Sheet Protectors And Oversize Indexes From Extending Outside Binder. Features Locking Angle-d Rings, Curved Spine, Inside Front Pocket, Spine Label Holder And Sheet Lifters. [SAM17680] Recycled UPC: 050362176806 UNSPC: 44122003 1.92 LB

17682 - Top Performance Dxl Locking D-Ring Binder With Label Holder, 3 inch Cap, Dark Blue $15.8 patented Flexaround Construction Prevents Top-loading Sheet Protectors And Oversize Indexes From Extending Outside Binder. Features Locking Angle-d Rings, Curved Spine, Inside Front Pocket, Spine Label Holder And Sheet Lifters. [SAM17682] Recycled UPC: 050362176820 UNSPC: 44122003 1.92 LB