Hydraulic Floor
Hydraulic Floor
![]() |
![]() 20 Ton Hydraulic Shop Press Floor Press US $279.99
|
![]() A Frame 30 Ton Hydraulic Shop Floor Press US $599.99
|
![]() 22 Ton Service Air Hydraulic Floor Jack US $215.99
|
![]() 3 TON ALUMINUM RACING GARAGE HYDRAULIC FLOOR JACK LOW US $289.99
|
How Hydraulic Jacks Function
Many of us have often wondered how some technological advancements like a hydraulic jack work. The secret is simple and has nothing to do with complex mechanisms. This device, as many other, work on the basis of Blaise Pascal's Principle that in a closed container, the pressure at all points is the same. Mathematically pressure is described by Force divided by Area. This means that if you have two connected cylinders – a large and a small one and apply some force on the second one it will result in a pressure, and since it is the same at all points, the large cylinder will be under the same pressure.
Hydraulic jacks use that principle and work with the force that the larger container emits and because it has greater area, the produced force is greater as well. It turns out that if there is big difference in the areas of the cylinders used, the potential force output of the bigger one will be much more powerful. Therefore, this device is constructed in a very simple way – two connected cylinders and the answer to how it works is leverage. The pressure described above is a result of the following – the cylinders are full with fluid under pressure that exert that same pressure through its own volume and against the surface of the cylinders containing it. This compressed fluid is typically oil, because it lubricates the system and is forced to the cylinders with a plunger. As it comes up the liquid goes through a valve pump. As the plunger goes down it sends the liquid to another valve into the cylinder.
This is the reason that these devices can generate great amounts of force while applying a small force to it. If a small one square inch piston applies a one pound weight to a hydraulic fluid, it will provide a pressure of 1 pound per square inch. In addition, if a larger container is in contact with the small one and has a piston area of 10 square inches it will have the force of 10 pounds to lift a heavy object with the big piston.
Floor jacks for instance, are used in almost any industry and as their name suggests they are positioned on the floor – you can see them in the automobile industry, they can lift a building to replace foundation as well, using a pump arm to lift things. This type of jack needs a solid ground for maximum stability and it can lift tremendous amounts of weights between 2 and 20 tons.
Some of the great inventions like the hydraulic jacks are built in a very simple way and follow simple rules, but they truly work wonders.
About the Author
Managing the aclickahead writers team is the major activity Sue Mitchell performaing these days. She is expert in writing on Hydraulic Jacks. Besides handsome experience being a leading writer on Hydraulic Jack
|
|
ALJ2T Hydraulic Floor Jack $439.38 This versatile ALJ2T hydraulic floor jack highlights a low profile design to get it where you need to. This quick lift service jack boasts a durable aluminum construction.Hydraulic floor jackQuick lift service jackFeatures a low profile designMaterials: AluminumDimensions: 32 inches long x 14 inches high x 8 inches deepModel: ALJ2T |
|
|
Hydraulic Floor Jack - 2 Ton $536.95 ? The strongest jack frame in its class; features flanged edges, both top and bottom, to resist twisitng ? Sealed cylinder prevents contamination of hydraulic system ? Conforms to ANSI PALD Part 10 ? Carries OTC's Lifetime Marathon Warranty? ? Assembled in U.S.A. Specifications: Lifting range: 3-3/4'' to 22-3/4'' Saddle: 6'' diameter Handle length: 48'' Frame height: 6-1/2'' Frame length: 30'' By OTC. |
|
|
OTC OTC1525 Hydraulic Floor Jack 2 Ton $581.77 The strongest jack frame in its class; features flanged edges both top and bottom to resist twisitng. Sealed cylinder prevents contamination of hydraulic system. Conforms to ANSI PALD Part 10. Carries OTC s Lifetime Marathon Warranty. Assembled in U.S.A.Specifications:Lifting range: 33/4 to 223/4 Saddle: 6 diameterHandle length: 48 Frame height: 61/2 Frame length: 30 |
|
|
Black Bull Hydraulic 8-ton Bottle Jack $65.5 Floor jack boasts a solid cast iron base for maximum stabilityHydraulic bottle jack contains an adjustable extension screw capJack uses a replaceable pump cartridgeCleated, non-slip screw capHydraulic bypass prevents ram over-travel |
|
|
OTC 5 Ton Hydraulic Floor Service Jack. Each $895.49 Manufacturer: OTC. Each. Features Benefits: Spring loaded 40" handle Built in safety load prevents use beyond rated capacity Foot pedal speeds the lifting operation Handle can be locked into any position Lifitng range: 6" to 22" OTC's 5 ton hydraulic f |
|
|
OTC OTC1505B 5 Ton Hydraulic Floor Service Jack $1051.25 Features and Benefits: Spring loaded 40 handle Lifting range: 6 to 22 Saddle diameter: 51/8 Overall reach: 47 Frame height: 73/4 OTC s 5 ton hydraulic floor jack is very easy to use and handy to have around your shop. It has a builtin safety overload that prevents using the jack beyond its rated capacity. The convenient foot pedal speeds the lifting operation. Also the handle has a lock and release control located on the top of it which can be locked into any position form vertical to horizontal. |
|
|
Hydraulic Groove $8.99 Hydraulic Groove |
|
|
2-1/2 Ton Quick Lifting Hydraulic Floor Jack $349.95 ? Double plunger design for faster lifting ? 8-9 pumps to full height ? Holes in sideplates to reduce overall weight without reducing strength Specifications: Min. Saddle Height: 4.33? (110mm) Max. Saddle Height: 19.3? (490mm) Chassis Length: 27.5? (700mm) Height with Handle: 56.5? (1435mm) Frame Height: 6.5? (165mm) Saddle Diameter: 4.8? (123mm)By Astro Pneumatic. |
|
|
Omega OME90000 Strut Spring Compressor Hydraulic $761.67 Smooth long stroke 4ton ram with remote hydraulic pump provides effortless safe one man operation. Angle rotatable spring clasp bracket adjusts to fit most strut spring makes and models. Adjustable strut shaft clasp secures the strut during operation. Sliding ram bracket provides multiple height adjustment. Can be permenantly mounted to concrete wall or floor |
|
|
Hydraulic Mining $14.99 Hydraulic Mining - Premium Poster |
|
|
Hydraulic Systems $49.99 Hydraulic Systems - Giclee Print |
|
|
OTC OTC1510B 10 Ton Hydraulic Service Jack $1342.58 Features and Benefits: 10 ton capacity with a lifting range of 63/8 to 22 Saddle diameter: 63/8 Reach: 49 Frame height: 97/8 Floor space: 613/8 x 181/8 OTC s 10 ton hydraulic floor jack is very easy to use and handy to have around your shop. It has a builtin safety overload that prevents using the jack beyond its rated capacity. The convenient foot pedal speeds the lifting operation. Also the handle has a lock and release control located on the top of it which can be locked into any position form vertical to horizontal.Superceded: OTC1510A |
|
|
Lumex Hydraulic Lift, Blue Powder Coated $433.22 Features of the Lumex Hydraulic Lift:* Heavy gauge steel construction.* Six point spreader bar with 360° rotation.* Uses Lumex® six-point, four-point slings or 2-point slings.* Manually adjustable base* Ergonomic placement of hydraulic pump handle facilitates ease of use.* Disassembles for easy storage.* Available in either chrome-plated or blue powder-coated finish.* Maximum weight capacity 400 lb.* Optional digital scale available.* Designed to meet the requirments of HCPCS code:E0630.* 1 year limited warranty. Product Specifications:* Max. Weight Capacity: 400 lbs.* Floor Clearance: 5.5".* Lifting Range Min. Height: 27.4".* Lifting Range Max. Height: 77.7".* Overall Length: 45.3".* Overall Height: 55.1".* Overall Width: 25.6".* Max. Base Width: 39.4".* Min. Base Width: 25.6".* Weight: 94.8 lbs. The shipping demensions for the Blue Powder Hydraulic Lift is 55" X 29" X 10". |
|
|
Graham Field Hydraulic Patient Lift, Blue $589.5 Patient Lift Product Detail Heavy gauge steel construction. Six point spreader bar with 360° rotation. Uses Lumex six-point, four-point slings or 2-point slings. Manually adjustable base. Ergonomic placement of hydraulic pump handle facilitates ease of use. Disassembles for easy storage. Available in either chrome-plated or blue powder-coated finish. Maximum weight capacity 400 lb. Optional digital scale available. Designed to meet the requirments of HCPCS code:E0630. 1 year limited warranty. Product Specifications: Floor Clearance: 5.5". Lifting Range Min Height: 27.4". Max Height: 77.7". Overall Length: 45.3". Overall Height: 25.6". |
|
|
Hydraulic Devices $49.99 Leonardo da Vinci Hydraulic Devices - Giclee Print |
|
|
Gibraltar Hydraulic Moto Throne $139.99 Gibraltar Hydraulic Moto Throne |
|
|
SSBC Hydraulic Brake Line $8.99 SSBC Hydraulic Brake Line |
|
|
Hydraulic Ram Steering Assist $1451.99 Hydraulic Ram Steering Assist; |


US $150.40













































































