Handle Slide Hammer

Handle Slide Hammer

How to Install a Keyed Entry Door Lever the Easy Way

The breeze of installing a keyed entry door lever the easy way is a project that most with a little bit of mechanical ability’s can perform.  The ease that the project requires makes it a prime candidate for saving you a little cash.  Saving some cash is a welcome sign to anyone’s pocket book.

This project of how to install a keyed entry door lever the easy way is a prime candidate to save you approximately $95.00 or more depending on where and how far you live from the local locksmith or handyman.

Tools Required

• 1 number 2 Philips Screwdriver
• 1 ½ inch Cold Chisel
• 1 hammer
• 1 pencil

Entry Lock Choices

There are many choices to choose from in regards to keyed entry door lever locks.  Some are better than others.  The choice ultimately is yours.  Some things to consider before purchasing the keyed entry door lever are to decide if you need a lever that opens on the left or right.  This is a very important step to find out because the lock will not function correct if you choose the wrong keyed door lever.  Stay with known name brands like Quickset, Master, or Forsyth.  These brands have been around a long time and have a good warranty and usability report to go along with their fine products.

How To Install The Keyed Entry Door Lever The Easy Way

Unpack the new lock and make sure all pieces are present.  Remove both strike plate screws from the packaging and also remove the strike plate for the door frame.  Line strike plate up with existing precut hole and install both screws supplied with your number 2 screwdriver.  Make sure the strike plate is aligned with the curved edge facing the closing door.  This is very important.  The finished installed plate must be flush with door frame if not remove as much material with your hammer and chisel to facilitate this result.  You’re done with that step.  Your next step is taking the locking handle part of the lock and inserting this into the pre-drilled hole.  Make sure the keyed lock handle faces the entrance from where you want to lock the door.  Next pick up the other lock end with the lever and no lock slide.

Slide lock mechanism and striker into 1 inch hole on the door.  The two halves of the lock and handle will go through this piece in the larger holes made for them.  Secure the striker too the door with the 2 screws provided.  Make sure that the mechanism on the lock is flush with the side of the door.   If not, remove enough material with your chisel and hammer to facilitate this.  Slide both pieces of the handle and keyed half together sandwiching the door and the lock striker mechanism in the middle between them.  Install both screws to secure both halves together with your number 2 screwdriver.  Insert key and make sure lock works and turns freely. Without closing door!  If all is well close door and try the locks features.

About the Author

Ryan Rollins is an expert on decorative home hardware, including keyed entry door levers. Visit his company website, www.ATouchOfBrass.com, to learn more about decorative door levers and other hardware for your home.

Dent Puller And Slide Hammer $35.95 The largest selling and most economical body shop dent puller in the industry. 3lb. slide weight is mounted on 12'' plated steel shaft. Famous blue vinyl hand grip over steel handle reduces sting on technicnian's hands and provides 100% grip. Broached hex in nose cone locks pulling screw in place...ends breakage. Supplied with two hardened pulling screws and ''L'' puller hook fabricated of aircraft quality steel. Nose cone and shaft threads are 1/2''-20.By Tool Aid.

OTC Head Assembly for OTC1173 Special Slide Hammer Puller. Each $81.67 Manufacturer: OTC. Each. Features and Benefits: The head has a jaw spread of 1/2" to 1-3/8" , adjusted by turning the slide hammer handle Customers also search for: Discount OTC Head Assembly for OTC1173 Special Slide Hammer Puller, Buy OTC Head Assembl

Hammer Handle - Olympian Straight $27.27 Olympian Straight Handle for Hammer

OTC OTC1176 Reversible Jaw Slide Hammer Puller $176.85 Features and Benefits: The basic slide hammer unit can be removed and used independently This puller with a 21/2 lb. hammer 2way and 3way head is 27 in length The inside 2jaw spread minimum 11/4 to the maximum 31/2 and the outside minimum 1 to the maximum 41/2 The inside 3jaw spread minimum 11/2 to the maximum 41/4 and the outside minimum 11/2 to the maximum 41/2 Weight 8 lbs.Here is an extremely versatile puller which will accomplish many pulling jobs involving gears bearings outer races grease retainers oil seals etc. Either two or three puller jaws may be used to handle inside pulling jobs such as bearing cups and outer races as well as regular outside pulling jobs. It s a very dependable and versatile tool to have around.

SG Tool Aid Junior Slugger Slide Hammer Dent Puller. Each $35.62 Manufacturer: SG Tool Aid. Each. Features Benefits: The finest shop engineered heavy duty slide hammer with 3 lb. slide weight Features a soft vinyl "Hang-It" handle grip for easy storage and shock cushioning Total weight is 5 lbs. Customers also sea

KD Tools KDT2290 Puller Set Slide Hammer Dent Pulling $60.02 Features and Benefits:. Pulls dented sheet metal back into place. 13 long shaft enables high pulling force. Slide hammer shaft has a 1/2 13 UNC thread. Handle length: 3.75 . To use drill a hole in the deepest part of the dent insert the hook or selfthreading screw tip and tap lightly with the 21/2lb slide hammer to remove the dent. . Replacement part: 229070 Hook and Screw Package. Replacement part: 229076 Nose Nut

Steel Hammer Handle $17.86 This is a competition level steel hammer handle.

Anaconda Slide-Hammer Log Splitter ANAC878 $49.99 Anaconda Slide-Hammer Log Splitter ANAC878Garden & Patio

SG Tool Aid SGT81500 Junior Slugger Slide Hammer Dent Puller $52.79 Features and Benefits: The finest shop engineered heavy duty slide hammer with 3 lb. slide weight Features a soft vinyl HangIt handle grip for easy storage and shock cushioning Special wide aircraft steel body hook is used to pull curls and creases in quarter rocker back and door panels L hook broached nose cone two jam nuts and two hardened pulling screws are supplied Total weight is 5 lbs.Designed for the professional body technician a lifetime tool. Nose cone and shaft threads are 1/2 20.

Tool Aid TA 81500 Junior Slugger Slide Hammer Dent Puller $45.15 The finest shop engineered heavy duty slide hammer with 3 lb. slide weight. Features a soft vinyl "HangIt handle grip for easy storage and shock cushioning. Special wide aircraft steel body hook is used to pull curls and creases in quarter rocker back and door panels. "L hook broached nose cone two jam nuts and two hardened pulling screws are supplied. Designed for the professional body technician a LIFETIME tool. Total weight is 5 lbs. Nose cone and shaft threads are 1/2 20.

OTC OTC1177 Puller Slide Hammer 5Lb 2 3 Way Head $196.51 Features and Benefits:. The basic slide hammer unit can be removed and used independently. This puller with a 5 lb. hammer 2way and 3way head is 27 in length. The inside 2jaw spread minimum 11/4 to the maximum 31/2 and the outside minimum 1 to the maximum 41/2 . The inside 3jaw spread minimum 11/2 to the maximum 41/4 and the outside minimum 11/2 to the maximum 41/2 . Weight 10 lbs. 8 oz.Here is an extremely versatile puller which will accomplish many pulling jobs involving gears bearings outer races grease retainers oil seals etc.nbsp; Either two or three puller jaws may be used to handle inside pulling jobs such as bearing cups and outer races as well as regular outside pulling jobs.nbsp; It s a very dependable and versatile tool to have around.

Slide Hammer Puller Kit $150.95 ? This kit provides a wide range of puller applications such as: Flange-type axles, oil seals and other press fit parts. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs. Contents: ? Shallow Flange ? Deep Flange ? Slide Hammer ? 2 Way Yoke ? 3 Way Yoke ? Center Bolt and Cone ? 3 Pc. Adapter Set ? Leg Package with ScrewsBy K-D Tools.

Esco Equipment ESC70150 Slide Hammer $198.65 Breaks stubborn truck tire beads with ease. Spring action design. Prevents kick back. Wedge foot is forced between the bead and the rim flange delivering a blow directly to the tip. Heavy duty tool. Dimension: 3.25 W x 48 L x 3.25 H. The Esco Slide Hammer is used to break the bead on truck tires. It will brake the most stubborn beads with ease. It has a spring action design preventing the slide hammer from kick back.

Tool Aid TA 81400 Dent Puller and Slide Hammer $39.17 The largest selling and most economical body shop dent puller in the industry. 3lb. slide weight is mounted on 12 plated steel shaft. Famous blue vinyl hand grip over steel handle reduces sting on technicnian s hands and provides 100 grip. Broached hex in nose cone locks pulling screw in place...ends breakage. Supplied with two hardened pulling screws and L puller hook fabricated of aircraft quality steel. Nose cone and shaft threads are 1/2 20.

CTA 8-Way Slide Hammer Set $103.95 Service rear axles, bearings, oil seals and press-fit parts.     Includes: Reversible jaws for internal/external work 3 Jaws 5 lb. slide hammer Rear axle pulling plate Screw Hook Dent puller adapter Cone Other adapters

OTC OTC7508 Slide Hammer Extension $61.71 Features and Benefits:. Use with OTC7507 CV joint fork and OTC1155 slide hammer to remove an axle assembly from the transaxle without causing damage to expensive aluminum transmission cases or other components. 171/2 long. 5/8 x 18 thread. Wt. 2 lbs. 7 oz.. nbsp;

SG Tool Aid SGT81400 Dent Puller and Slide Hammer $48.44 Features and Benefits: 3 lb. slide weight is mounted on 1/2 plated steel shaft Famous blue vinyl hand grip over steel handle reduces sting on technician s hands and provides 100 percent grip Broached hex in nose cone locks pulling screw in place...ends breakage Supplied with two hardened pulling screws and L puller hook fabricated of aircraft quality steel Nose cone and shaft threads are 1/2 20The largest selling and most economical body shop dent puller in the industry.

Gill Replacement Hammer Handle $30.66 Replacement hammer handle with aluminum grip.Please Note: This item CANNOT ship to P.O. Boxes, APO, or FPO Addresses. It CAN ONLY ship to a Street Address.

OTC 7703 10LB Slide Hammer/ Shank Unit $101.19 TenPound Slide Hammer Puller This heavyduty slide hammer puller gets tough with those really stuck parts. It has all the features of our smaller versions heat treated 24 long and a 5/8 18 threaded end to adapt to most pulling attachments. The difference is the tenpound hammer that gives you the extra muscle for really stubborn pulling jobs.

OTC Reversible Jaw Slide Hammer Puller. Each $122.52 Manufacturer: OTC. Each. Features Benefits: The basic slide hammer unit can be removed and used independently This puller with a 2-1/2 lb. hammer, 2-way and 3-way head is 27" in length The inside 2-jaw spread minimum 1-1/4" to the maximum 3-1/2" and th

Slide Hammer Puller Kit by Wilmar Tools $113.99 Best method of hub removal;Includes slide hammer with internal and external puller fingers;Locking pliers adapter, puller hook and dent puller;Sturdy storage case included

H & S Auto Shot Uni Pull Slide Hammer. Each $103.29 Manufacturer: H & S Auto Shot. Each. Customers also search for: Discount Uni Pull Slide Hammer, Buy Uni Pull Slide Hammer, Wholesale Uni Pull Slide Hammer, 842005000704, ToolWeb, Stud and Spot Welders

Enmergency hammer $5 Material: plastic + metalComfortable to handle and useSOS red hammer Size: 135*80*35 mmWeight: 185 g

Hammer Handle - Olympian Curved $27.27 Olympian Curved Handle

Tool Aid TA81600 Taper Slide Hammer Dent Puller $30.28 Taper slide hammer dent puller. Manufactured to the highest quality available. Meets the standard of excellence. Latest technical development.

Hammer $12.99 Hammer

Nylon Wire Hammer hammer $4.29 This nylon head hammer is designed for wire working. It safely flattens and strengthens your designs. Also great for setting eyelets and grommets. The wooden handle is 5 in. long x 1/2 in. wide. The rubber nylon head is 2 1/2 in. long x 1/2 in. wide.

Sunex Slide Hammer Puller Set. 1 Set $108.46 Manufacturer: Sunex. 1 Set. Features Benefits: Jaws can be set up for 2 or 3 jaw internal or external pulling Included in a heavy-duty steel carrying case This professional slide hammer puller set eases removal of flange-type axles, oil seals, bearings

Sunex SUN3911 Slide Hammer Puller Set $156.55 Features and Benefits: Jaws can be set up for 2 or 3 jaw internal or external pulling Included in a heavyduty steel carrying caseThis professional slide hammer puller set eases removal of flangetype axles oil seals bearings and other press fit parts. It s made with the quality and durability to last This set includes the following: 5 lb. heavy duty slide hammer 8 function internal or external 3 jaw puller Internal or external 2 jaw puller Puller hook Rear axle puller Dent puller and Special grip wrench adapter.

Truper TRP30929 Truper 30929 Sledge Hammer 8 No. Fiberglass Handle $51.23 8lb sledge hammer with durable fiberglass handle

Flute Noise Hammer $5.99 FLUTE HAMMER has a whistle on handle and noise making squeezable hammer top. A great clown accessory.

KD Tools Inner CV Joint Pullers for Slide Hammer. Each $41.81 Manufacturer: KD Tools. Each. Features Benefits: Used with a 2-1/2 lb. slide hammer Inner CV joint pulley puller only, fits slide hammer with 1/2"-13 UNC threads Works on GM and some Ford vehicles This tool will pull most CV joints that use a hidden sn

Stanley Stanley 20oz Fbgls Handle Hammer 51-627 $13.75 20oz fbgls handle hammer Forged high-carbon steel head for durability Fiberglass handle absorbs shocks and vibrations Diamond pattern grip 20 oz. rip hammer Brand #: Stanley 51-627 UPC: 076174516272 Keywords: rip hammer fiberglss hndl fiberglass handle

OTC OTC1179 Silver Slapper 8Way Slide Hammer Puller Set $207.27 Features and Benefits: You can pull flangetype rear axles remove stubborn oil seals and bearings and other pressfit parts Puller jaws can be set up for 2/3jaw internal or external pulling jobs Slide hammer with 5lb. hammer Complete set provides most common pulling attachments more can be added Our most popular slide hammer pulling setThe Silver Slapper 8Way Slide Hammer Puller Set includes: the 1155 Slide hammer with 5lb. hammer 7372 Rear axle pulling attachment 3way crosshead 24545 Cone 27241 2way crossblock 27315 Puller hook attachment 34698 Pulling jaws (3) for internal or external pulling jobs 205378 Grip wrench adapter with single lead (wrench not included) and 205377 Dent puller attachment.

OTC OTC4579 9Way Slide Hammer Puller Set $122.83 Pulls flangetype rear axles and most frontwheel drive hubs. Internal and external jaws provide a variety of combinations to pull bearings gears and seals. Twoand threeway cross blocks and cone provide the perfect jaw configuration for most jobs. Set also includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. Designed for use with other OTC 5/8 18 thread slide hammer attachments. Packaged in blowmolded case.

Seymour Sledge Hammer With 36in. Hickory Handle SH10 $48.2 Sledge hammer. 36 Hickory handle. 10 lbs. Length: 3. Width: 36.5. Height: 7.25

OTC 5 lb. Reversible Jaw Slide Hammer Puller. Each $148.95 Manufacturer: OTC. Each. Features Benefits: The basic slide hammer unit can be removed and used independently This puller with a 5 lb. hammer, 2-way and 3-way head is 27" in length The inside 2-jaw spread minimum 1-1/4" to the maximum 3-1/2" and the ou

OTC Silver Slapper 8 Way Slide Hammer Puller Set. Each $156.59 Manufacturer: OTC. Each. Features Benefits: You can pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts. Puller jaws can be set up for 2/3-jaw internal or external pulling jobs Slide hammer with 5lb. hammer Com