Gear Wrench Set

Gear Wrench Set

Step By Step Oil Change

This is an, easy to follow, step by step guide to doing an oil change.

You can easily save over a hundred dollars a year changing your own oil. Also, when you do it yourself, you'll have the satisfaction of knowing the job was done right, with the right materials.

Here are the tools you will need:

- a 3/8-drive socket set (metric will work for both)
- a set of combination wrenches (close, and open-ended, netric)
- an oil filter wrench
- something to catch the old oil -- an oil pan, an old bucket, etc.
- 2 or 3 one gallon milk containers with screw-on lids
- a funnel - a one quart Ziploc baggie
- a lot of old newspapers
- several dirty rags
- work clothes
- a new oil filter (see vehicle's owner's manual for requirements)
- as much oil as needed to refill the engine (check owner's manual for grade and how many quarts.)

STEP ONE - Drive your car around for a few minutes to heat the oil, and make it thin enough, tol drain more completely from the engine block. Find a flat spot on your driveway, and park.

STEP TWO - Turn off the engine, put the car in gear, and set the parking brake. Block the tires with bricks, rocks, or wood. Jack up the car if you need to, slide under, and locate the oil drain plug.

It will be the closest thing to the ground, a large nut with a slim washer under it. Sometimes it will be labeled. Find the right socket for the nut.

STEP THREE - Turn the nut counter-clockwise. Loosen, but don't remove it.

STEP FOUR - Spread newspaper under the car. Slide the drain pan under the drain plug. Loosen the plug and put it aside. The oil will drain in about two minutes.

STEP FIVE - Slip the oil filter wrench onto the socket wrench. You'll probably have to use the short extension. Set the oil filter wrench up to grab counterclockwise. Slip it over the oil filter and pull. Carefully, remove it all the way and pour the contents into the drain pan. Put the used oil filter, right-side-up, on the newspaper.

STEP SIX - Get out, open the hood, and remove the oil filler cap. S

STEP SEVEN - Before putting the new oil filter in, dip your finger into the pan, and rub some of the oil on the rubber gasket at the bottom of the filter. This will help it seal better against the engine block. Use a rag to wipe off the round metal circle on the engine, where the oil filter goes, then thread the new filter onto the post. Tighten it by hand, if you can, (it takes about a half to three=quarters of a turn, not more: check instructions on filter), or use the oil filter wrench to tighten.

STEP EIGHT - Put the washer in place and thread the drain plug back into its spot. Make it tight, but not so tight you can't get it off next time. Now, using the funnel, pour the old oil into the milk bottles. Then, wipe the funnel out with a rag.

STEP NINE - Put the funnel into the oil filler hole and pour in as many quarts of oil as the manufacturer recommends. Once the oil is in, twist the cap back on, and check the oil level with the dipstick.

STEP TEN - Turn on the car, and let it run for five minutes. Check for leaks. That's it.

Important note: The EPA now levies a huge fine for improper, or illegal oil disposal. Find a local oil place that will accept your dirty oil.

About the Author

A E Bates is a do-it-yourself-er, and writer of hot, adult books. For information:

http://stores.shop.ebay.com/Audio-Erotica__W0QQ_armrsZ1

KD Tools 4 Piece SAE Combination Gear Wrench Set. Each $41.5 Manufacturer: KD Tools. Each. Features Benefits: Sizes: 3/8" - 9/16" Customers also search for: Discount 4 Piece SAE Combination Gear Wrench Set, Buy 4 Piece SAE Combination Gear Wrench Set, Wholesale 4 Piece SAE Combination Gear Wrench Set, 082171093

Dib Tool Imports Dib Tool Imports Gear Wrench Adapter Set 397539 $4.47 Gear wrench adapter set Adapter converts gear wrench into a socket and ratchet Available in standard and metric adapter Each set includes 4 popular adapter sizes Metric (includes: 8mm, 10mm, 12mm, 13mm adapters) Brand #: DIB Tool Imports 397539 UPC: 009326318318 Keywords: gear wrench adaptor adapter

Apex Tool Group KD85099 XLarge 16 Piece Gear Wrench Set $301.9 XLarge Gear Wrench Set Sizes. Longest ratcheting wrench available today. Up to 25 increased length for a superior torque load. Oval shape handle for improved comfort and grip. Surface Drive Plus allows off corner loading on the open end giving greater torque and minimizing fastener rounding. Surface Drive on box end minimizes fastener rounding. Needs as little as 5 degrees of sweep to move a fastener. Size: 8mm23mm and 24mm. Thin head shank design allows you to reach the tightest of areas.

Dib Tool Imports Dib Tool Imports Gear Wrench Adapter 397520 $4.47 Gear wrench adapter Adapter converts gear wrench into a socket and ratchet Available in standard and metric adapter Each set includes 4 popular adapter sizes SAE (includes: 3/8?, 7/16?, 1/2?, 9/16? adapters) No. 397539: Metric (includes: 8mm, 10mm, 12mm, 13mm adapters) Brand #: DIB Tool Imports 397520 UPC: 009326318301 Keywords: gear wrench adaptor adapter

KD Tools 4 Piece E-Torx Gear Wrench Set. Each $66.43 Manufacturer: KD Tools. Each. Features Benefits: Provides the speed performance advantage over the traditional wrench Fast ratcheting action Includes: E6 x E8, E10 x E12, E14 x E18, E20 x E24 Customers also search for: Discount 4 Piece E-Torx Gear Wr

Dib Tool Imports Dib Tool Imports 8pc Gear Wrench Set Mm 9645 $51.3 8pc gear wrench set mm All-metal construction, fully hardened, mirror finished, nickel chrome-plated Combines the feature of a combination wrench with a ratchet 5 precision movement ratcheting Box end Set includes: 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm, and 18mm wrenches Brand #: DIB Tool Imports 9645 UPC: 099575096457 Keywords: gear wrench

Dib Tool Imports Dib Tool Imports 8pc Gear Wrench Set Sae 9595 $51.3 8pc gear wrench set sae All-metal construction, fully hardened, mirror finished, nickel chrome-plated Combines the feature of a combination wrench, with a ratchet 5 precision movement ratcheting Box end Set includes: 5/16?, 3/8?, 7/16?, 1/2?, 9/16?, 5/8?, 11/16?, and 3/4? wrenches Brand #: DIB Tool Imports 9595 UPC: 099575095955 Keywords: gear wrench

Dib Tool Imports Dib Tool Imports 4pc Gear Wrench Set Sae 9665 $29.52 4pc gear wrench set sae All-metal construction, fully hardened, mirror finished, nickel chrome-plated Combines the feature of a combination wrench with a ratchet 5 precision movement ratcheting Box end Lifetime warranty SAE 3/8?, 7/16?, 1/2?, 9/16? Brand #: DIB Tool Imports 9665 UPC: 099575096655 Keywords: wrench gear

Dib Tool Imports Dib Tool Imports 4pc Gear Wrench Set Mm 9660 $29.52 4pc gear wrench set mm All-metal construction, fully hardened, mirror finished, nickel chrome-plated Combines the feature of a combination wrench with a ratchet 5 precision movement ratcheting Box end Lifetime warranty Metric 10mm, 12mm, 13mm, 14mm Brand #: DIB Tool Imports 9660 UPC: 099575096600 Keywords: wrench gear

KD Tools 7 Piece SAE Combination Gear Wrench Set. Each $53.91 Manufacturer: KD Tools. Each. Features Benefits: Provides the speed and performance advantage over the traditional wrench, providing fast ratcheting action. Sizes: 5/16 in., 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in. and 3/4 in. Customers also sear

Gear set $3 Gear set

Gear Set $5 Gear Set

gear set $6.92 gear set

Gear A set $2 Gear A set

25-662 - 7Pc. Sae Gear Combo Wrench Set $178.11 [069-25-662] Truck Delivery UPC: 781412256628

Blackhawk™ By Proto® Set Wrench Reverse Gear 8 Pcmetric. Each $91.25 Manufacturer: Blackhawk™ By Proto®. Each. Thin head and slim shank Fine tooth gears for smooth ratcheting Angled wrench for knuckle clearance One finger reverse lever for quick change Opening Size = 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 8

Gear Wrench 81910 5 Piece SAE Flex Flare Nut Wrench Set $94.55 Flexible flare ends; Great for access Full polished Sizes and part number stamped on both sides of the wrench Long pattern length Includes: 1/4 x 5/16 ; 3/8 x 7/16 ; 1/2 x 9/16 ; 5/8 x 11/16 ; 3/4 x 7/8

Blackhawk™ By Proto® 8 Piece Reverse Gear Combination Wrench Set. 1 Set $91.25 Manufacturer: Blackhawk™ By Proto®. 1 Set. Thin head and slim shank Fine tooth gears for smooth ratcheting Angled wrench for knuckle clearance One finger reverse lever for quick change Opening Size = 5/16 in, 3/8 in, 7/16 in, 1/2 in, 9/16 in, 5/8 in, 11/

Apex Tool Group KD85299 5 Piece Metric S Style Gear Wrench Set $198.47 Metric S Style Box Gear Wrench Set 1017 19 and 22. Reversible levers on both ends to allow direction changes from either side. Eliminates the problem of reaching around obstructions. Two double reversing 5 degree ratcheting heads. Needs as little as 5 degrees to turn a fastener 1017 and 19 x 22 Sizes. Manufactured to the Highest Quality Available. Satisfaction Ensured. Huge selection to choose from.

KD Tools 4 Piece Flex Head Gear Wrench Completer Set SAE. Each $103.35 Manufacturer: KD Tools. Each. Features Benefits: Surface Drive on open end for better fastener gripping Expands and compliments the 9701 Gearwrench flex head ratcheting wrench set Adds more storage to include smaller size set Completer set for 9701 Gea

KD Tools 4 Piece Flex Head Gear Wrench Completer Set Metric. Each $102.11 Manufacturer: KD Tools. Each. Features Benefits: Expands and compliments the 9901 GearWrench Flex Head Ratcheting Wrench Set Provides additional storage for 9901 smaller and new larger size wrenches Adds 21mm - 25mm sizes Complete set for 9901 GearWren