Filter Wrench Socket

Filter Wrench Socket

How to Change Your Car’s Oil

There are many places you can go to get your oil changed. Most of the places are not too expensive, but they are often busy, and it is hard to get to the shop when you are busy working. If you are interested in changing your car’s oil yourself, there are things you should know. First of all most cars are pretty much the same in this regard. If you have changed one car’s oil you can probably change it in most cars. While the oil pan may be located in a different area of each individual model it is generally on the bottom of the vehicle. Below are a few tips that will help you make this task easier.

• You will need at least six quarts of oil. Preferably you should use the same type of oil as you had in the engine before.
• You will also need to purchase a new oil filter designed specifically for the model of your car.
• During an oil change most people also change the air filters on their cars. The air filter tends to become dirty in about the same time as the oil needs changing, especially on older model vehicles. Therefore it may not be a bad idea to purchase an air filter as well.
• If you have not done any prior work on the vehicle at home, you will need to purchase a car jack or tire racks. These racks allow you to drive up on them to elevate the front end of the car where you will be working. If you are using a jack or the racks you will need to place blocks behind the other two tires to keep the car from rolling because the parking brakes do not always hold the grip reliably.Make sure that the parking brakes are on and that the transmission is in park position. You need to elevate the car so that the oil will run out of the oil pan completely as well as make it easier for you to reach the oil pan.
• Prepare a canister or a pan to catch the oil in. Most auto parts shops including those online will have oil pans that you can drain the oil into. These pans have a special design to make disposing of the oil into an oil drum easy.
• You will also need an oil filter wrench. This wrench must be the correct wrench for the size of filter you have. There are many sizes depending on the type of car you have.Another tool you will need is the wrench for the oil pan nut. This nut has to be removed to let the oil escape. This is usually a metric or standard wrench depending on who manufactured your car. The best tool for this job is a socket wrench.
• Once you have all of the tools and other items you will need to locate the oil pan. It is best to look in your car's manual for this information. Keep plenty of towels on hand as well.
• First, loosen the nut on the oil pan, making sure that you are prepared for the first gush of oil by having the waste pan underneath the oil pan.
• Next, locate the oil fill cap and remove it. Some manuals may tell you to do this first. I have found that this creates more of a gush if you wait to remove the hexagonal nut after, so the potential for a spill is higher.
• Once you have gotten the oil flowing out of the vehicle you can then set a bucket just under the oil filter. There will be a little oil drainage from the filter so having the bucket under there will help keep you from causing a spill. Once you have removed the old filter you can then screw on the new filter following the instructions on the box.

Now that you have removed all of the oil from your vehicle you will need to make sure that you replace the hexagonal nut on the oil pan and make sure that the oil filter is screwed on tight. Then, you can begin replacing the oil. It is best to fill the engine with at least four quarts of oil and then let it settle. Check the engine oil level and then add a quart until it is full. Check with your manual on the exact amount of oil required for the engine.

Source:
http://www.abccarparts.com/
About the Author

Tim Kraines is an active contributing member of ABC Car Parts - an international used car parts marketplace and a provider of professional car parts inventory software solutions.

Assenmacher 36mm Oil Filter Socket Wrench. Each $22.06 Manufacturer: Assenmacher. Each. Features and Benefits: Fits BMW, Ford, VW/Audi and Mini Cooper S (through 2007) 36mm with 6 flats Steel construction Customers also search for: Discount Assenmacher 36mm Oil Filter Socket Wrench, Buy Assenmacher 36mm Oil

Socket Wrench $68.51 High Quality Content by WIKIPEDIA articles A socket wrench, more commonly referred to as a ratchet, is a type of wrench, or tightening tool, that uses separate, removable sockets to fit many different sizes of fittings and fasteners, most commonly nuts and bolts.The socket wrench includes a ratcheting mechanism that allows the nut to be tightened or loosened with a reciprocating motion, without requiring that the wrench be removed and refitted after each turn. Typically, a small lever behind the socket switches the wrench between tightening and loosening mode. The sockets are attached to the ratchet through a square fitting that contains a spring loaded ball detent mechanism to keep the sockets in place. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 84 Publication Date: 2010/08/24 Language: English Dimensions: 6.00 x 9.02 x 0.20 inches

Lisle Filter Wrench for GM 2.2L $8.99 Removes and installs oil filters on 2.2 liter GM Ecotec engines. Removes and installs oil filters on 2.2 liter GM engines. The low profile 1 1/4'' socket is specially designed for operating clearance. 3/8'' drive. Not for use with an impact wrench.

OilFilter Wrench $58.94 High Quality Content by WIKIPEDIA articles An oilfilter wrench is a tool for removing spinon type oil filters. These filters are smooth, cylindrical canisters with knurling on the bottom that are difficult to grip, especially when they are oily. One common type of wrench is shown on the right. The loop of chain is placed around the filter, and the bar is turned anticlockwise by hand until the chain wraps itself tightly around the filter. A socket wrench or adjustable spanner is then used to turn the hexagonal bar further in the same direction. This increases the tension in the chain, which bites into the soft metal casing of the oil filter which helps prevent slippage. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 72 Publication Date: 2010/08/17 Language: English Dimensions: 6.00 x 9.02 x 0.17 inches

Lisle Oil Filter Socket For 2.2L GM $14.32 Removes and installs oil filters on 2. 2 liter GM Ecotec engines. The low profile 1 1/4 inch socket is specially designed for operating clearance. 3/8 inch drive. Not for use with an impact wrench.

Assenmacher Specialty AH2101 7 Piece Oil Filter and Socket Set $102.42 This 7piece set contains oil filter wrench sockets for many domestic and foreign applications. Set covers all MercedesBenz applications. The 27mm 32mm and 36mm hex sizes covers VW/Audi BMW newer Mercedes 4cylinder engines Saturn and GM 2.2 L Ecotec engines. Covers Ford Escape Hybrid and Ford OEM FL 910 and FL 793. The four cupstyle wrenches covers many VW BMW Toyota and Mazda 3. Also covers Dodge Sprinter and Jeep 3.0L CRD engines and 19992010 Volvo models. Includes:. 27mm Oil Filter Socket. 2132 32mm Oil Filter Socket. 2136 Oil Filter Socket Wrench. 2175 74.5mm Oil Filter Socket. M 0219 74mm Oil Filter Wrench. M 0284 84mm Oil Filter Wrench. V 410 86.5mm Oil Filter Wrench. Covers All MercedesBenz Applications. Coverage for VW/Audi BMW Saturn Toyota Mazda and GM. Covers Ford Escape Hybrid. Also Covers Dodge Sprinter Jeep and Volvo (See Application Charts for Detailed Applications).

8 in 1 Socket Wrench $19.99 8-in-1 Socket Wrench Is a Time and Space Saver. No need for separate wrenches. Eight sizes—from 3/8" up to 13/16"—are all on this one wrench. Simply pivot into place to use. Designed for tight spaces; position socket to the side for extra leverage. Heavy-duty carbon-steel construction stands up to tough use.

HeliProz Socket Wrench Set (5/5.5/7/8mm) $18.99 HeliProz Socket Wrench Set (5/5.5/7/8mm) Type: Replacement Parts Color: Multi-Color Gender: Unisex Age: Adult

American Standard M9622730070A Wrench 17mm Deep Socket $18.55 Wrench 17 mm Deep Socket. 3/8 Drive. 12 Pt

Lisle Oil/Fuel Filter Socket for 6.0L Ford Diesel $12.95 Removes and installs filters on 6-liter Ford Diesel pickups. The low profile socket fits both the 35mm and 36mm fuel and oil filters. The low profile socket works in confined spaces. 3/8'' drive. Not for use with an impact wrench.

Oil Filter Strap Wrench $7.95 BikeMaster Oil Filter Strap Wrench Undo nearly any size oil filter with this innovative Strap Wrench method. BikeMaster's Strap Oil Filter Wrench uses your torque to tighten around the filter and unscrew it - the harder you twist the wrench the tighter the wrench gets. Make your life easier by having the right tool for the job. Will cover just about any need Universal fit and high friction will tackle just about any job Made from quality materials for years of use

8-in-1 Socket Wrench $23.99 BikeMaster 8-in-1 Socket Wrench Have eight socket wrenches in your hand at one time! This amazingly innovative tool is the one of the most versatile and compact?on the market today. The rotating heads serve 2 purposes: they allow quick easy selection of different sizes and they allow you get?power onto bolts and nuts in confined spaces. Great idea to save space in a toolbox or to keep in you machines tool kit/saddle bags. Made from durable, drop forged chrome vanadium steel Turn socket tip to access tight spaces Turn socket to side for extra leverage Replaces 8 wrenches and/or sockets 12-point style means you can index the wrench in tight spaces Fits 10, 12, 13, 14, 15, 17, 17, 19 and 21 mm sizes Manufacture's lifetime warranty

18mm Spark Plug Socket Wrench $16.99 Motion Pro 18mm Spark Plug Socket Wrench Specifically designed for Honda XR400's as a trail tool, but fits many models with 18mm plugs The socket is designed to fit into the spark plug cavity Can be used with a 3/8" ratchet, 13/16" wrench or a screwdriver through an 8.5mm hole for removal and installation

3 Filter Wrench $9.95 Drag Specialties 3" Filter Wrench Black stamped steel Cutout design to clear crank sensor

Assenmacher ASS2132 32Mm Oil Filter Socket Saturn Audi $33.48 (32mm 6 flats) Oil Filter Socket Wrench. Applicable: GM: newer models with 4 cylinder Ecotec engine. Saab: 93 2003. Saturn: Ion 4 cylinder Ecotec. Steel construction. Also available in the AST 2100 kit.

Lisle Corporation LS14500 6.0 Liter Ford Filter Socket Fits 35mm and 36mm $22.88 36mm Low Profile Filter Socket. Removes and Installs Filters on 6 Liter Ford Diesel Pickups. The low profile socket fits both the 35mm and 36mm fuel and oil filters. The low profile socket works in confined spaces. 3/8 drive. Not for use with an impact wrench.

Assenmacher ASS2136 Vwith AudiBmwith Volvo 36mm Oil Filter Socket $37.38 Fits multiple European and Domestic vehicles. 36mm with 6 flats. See applications chart. Included in the 2100 Oil Filter Wrench kit. Steel Construction

Drive Socket Lisle Drive Socket 14700 $18.65 LISLE LOW PROFILE OIL FILTER SOCKET -- 32 mm; 3/8 in. drive; Specially designed for operating clearance; Removes and installs oil filters on 2.2 liter GM Ecotec engines; Not for use with an impact wrench.. Auto Parts Warehouse has extensive Lisle Drive Socket catalogs.We are now offering FREE shipping on all Lisle Drive Socket orders over $50.00. Our secure lisle drive socket catalog is available every hour of everyday. Shop with confidence for all your lisle drive socket needs. Lisle Drive Socket are In Stock and available today. Save up to 60% off dealer price on your next Lisle Drive Socket purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices

Lisle Filter Wrench $11.95 Straight Handle Filter Wrench. 1'' stainless steel band with special ''teeth'' grips tightly. Vinyl-covered handle provides firm, comfortable grip.

Lisle Corporation LS14700 Oil Filter Socket for 2.2Liter GM 32mm $22.23 Removes and installs oil filters on 2.2 liter GM Ecotec engines. The low profile 11/4 socket is specially designed for operating clearance. 3/8 drive. Not for use with an impact wrench.

Cobra Shower Valve Socket Wrench PST160 $23.67 21/32 x 27/32 socket wrench. Carded. Length: 0.92. Width: 6.31. Height: 3.88

Cobra Shower Valve Socket Wrench PST158 $24.37 Shower valve for socket wrench. 11/32 x 13/32 . Carded. Length: 1.32. Width: 6.31. Height: 3.88

Cobra Shower Valve Socket Wrench Set PST141 $30.79 Shower valves for socket wrench. Carded. Length: 2. Width: 10.06. Height: 7.5

Adjustable Filter Wrench $62.99 BikeMaster Adjustable Filter Wrench Don't have the wrong sized oil filter wrench again! BikeMaster's Adjustable Filter Wrench will work on filter from 65mm?to 80mm (2-3/8" to 3-1/4"). A great tool for any?DIY mechanics?arsenal. Dirt bikes, cruisers, scooters, sport tourers, and anything in between. Get the job done faster so you can get out on your machine. BikeMaster's specially tempered stainless steel safety wire Stiffer than the "full soft" annealed temper of other manufacturers Holds shape better Resists sheering better Superior 300 series stainless steel

Assenmacher Toyota Oil FIlter Wrench. Each $16.46 Manufacturer: Assenmacher. Each. Features and Benefits: 64mm with 14 flats Use in conjunction with a 24mm or 15/16" socket Made in the U.S.A. Toyota Models: Avalon (2005-2008), Camry 4 cyl (1983-2008), V6 (2007-2008), Celica (1986-2005), Corolla (1983-2

Duttonlainson Fuel Filter Wrench 491 $25.49 Fuel filter wrench. Fits 4954 filter bowl (47415187) perfectly for easy removal without cracking. Length: 0.6. Width: 11.75. Height: 6

KD Tools XLarge Oil Filter Wrench. Each $14.32 Manufacturer: KD Tools. Each. KDT3527 Oil filter Wrench X-Large Customers also search for: Discount XLarge Oil Filter Wrench, Buy XLarge Oil Filter Wrench, Wholesale XLarge Oil Filter Wrench, 082171035272, ToolWeb, Oil Change Tools

Cobra Shower Valve Socket Wrench PST159 $23.94 Shower valve socket wrench. Removes 2932 and 3132 hex shower faucet stems. Steel. Carded. Length: 1.4. Width: 6.31. Height: 3.88

K Tool International Oil Filter Wrench 36mm. Each $14.12 Manufacturer: K Tool International. Each. Features and Benefits: Designed to handle a variety of applications, oil filter cap socket is rugged, laser marked and works even in confined areas Use to remove housings with cartridge-type oil filters Applicat

75 Piece Socket and Wrench Set. $29.99 Ideal mechanics tool set that includes a selection of sockets,wrenches, pliers and screwdirver bits.75 piece socket ; wrench set.Size H7.8, W35, D24.5cm.Weight 3.25kg.Accessories included: 3/8in Dr. ratchet socket driver.3/8in Dr. 3in extension bar.3/8in Dr. 5/8in spark plug socket.3/8in Dr. to in adapter.in dr. 3in extension bar.8x 3/8in Dr. sockets.20x in Dr. sockets.Bit driver.20x 1in hex bits.8x combination wrench.11x hex key wrenches.6in long nose pliers.6in diagonal pliers.Made for carbon steel, TPR, PP, PVC, HDPE.Blow moulded carry case included.Internal manufacturer's 1 year guarantee.

Plews Strap Filter Wrench. Each $8.42 Manufacturer: Plews. Each. Universal in application, this filter wrench quickly adapts to any spin-on filter up to 6" in diameter Drive Opening Size = 6 in [Max] Used With = 1/2 in. Square Drive Wrench Opening Type = Strap Overall Handle Material = Steel

Lisle Import Filter Wrench $9.99 Removes all oil filters from 2 ?'' to 3 1/8'' in diameter Extra large range enables the wrench to fit almost all import car filters plus the common 3'' domestic car filters Steel jaws grip filter without slipping Works in tight spots from the front of the filter using a 3/8" drive

Dib Gs Dib Gs 21 32 in Socket Wrench 453412 $1.56 21/32? socket wrench For removing faucet stems from 2 or 3-handle tub and shower valves 21/32? x 27/32? Brand #: dib GS 453412 UPC: 009326411439 Keywords: socket wrench tub shwr valve

Dib Gs Dib Gs 29 32 in Socket Wrench 453420 $1.66 29/32? socket wrench For removing faucet stems from 2 or 3-handle tub and shower valves 29/32? x 31/32? Brand #: dib GS 453420 UPC: 009326411446 Keywords: socket wrench tub shwr valve

Dib Gs Dib Gs 1-1 32 in Socket Wrench 453439 $1.89 1-1/32? socket wrench For removing faucet stems from 2 or 3-handle tub and shower valves 1-1/32? x 1-3/32? Brand #: dib GS 453439 UPC: 009326411453 Keywords: socket wrench tub shwr valve

Hydrotech 21401003 Filter Wrench HTHTF $21.59 The Hydrotech 21401003 water filter wrench fits all Hydrotech 101 Series 123 Series HT Series HTF Series HTHTF Series Reverse Osmosis and Aquafier Filter Systems. The Hydrotech 21401003 wrench fits all Hydrotech 3 and 4 vessel reverse osmosis systems. The Hydrotech Filter Wrench 21401003 also fits some Arrowhead Puritap Fillmaster Nutripure Sierra Springs and US Pure Water filtration housings. Use for twisting off the Hydrotech water filter housing sumps. Do not use the Hydrotech 21401003 spanner wrench to tighten the housing sumps. Overtightening the sump can cause damage to the orings and make reopening the housing sump difficult. You should only hand tighten the housing sump. The Hydrotech wrench makes replacing water filters easy.

Lisle Spring For LIS63600 Oil Filter Wrench. Each $4.62 Manufacturer: Lisle. Each. Customers also search for: Discount Spring For LIS63600 Oil Filter Wrench, Buy Spring For LIS63600 Oil Filter Wrench, Wholesale Spring For LIS63600 Oil Filter Wrench, 083045636304, ToolWeb, Oil Change Tools

Pentek SW2 Filter Housing Wrench $24.29 Use the SW2 filter wrench to loosen the bottom of the housing during cartridge replacement. Slide circular end over housing until a snug fit is achieved and unscrew. Do not use the SW2 housing wrench to secure the water filter canister to the water filter cap. Over tightening the sump can cause damage to the oring and make reopening the water filter housing difficult. You should only hand tighten the housing sump. The SW2 wrench makes changing water filters easy. The SW2 can be used with standard whole house housings.

Toyota Oil Filter Wrench $19.95 ? Oil Filter Wrench. ? Applicable: Lexus GS 300 2006, Scion xA, xB, tC 2004-up, Toyota Avalon 2005, Camry (4 cylinder) 1983-2004, Corolla 1983-2004, Echo 2000-2004, Highlander (4 cylinder) 2001-2004, Matrix 2003-2004, MR2/spyder 1985-2004, Paseo 1992-1997, Prius 2001-2004, RAV4 1996-2004, Solara (4 cylinder) 1999-2004, and Tercel 1980-1998By Assenmacher Specialty Tools.

Challenge Xtreme 41 Piece Socket and Wrench Set. $24.99 Combined ; ; 3/8 Drive socket setHeat treated carbon steel combination wrenches for strength and durabilitySize: 30×5.5×21cm.41 piece socket ; wrench set.Size H30, W5.5, D21cm.Accessories included: 1 x 50mm bits holder.8 x ; Dr socket - 4, 5, 6, 7, 8, 9, 10, 11mm.8 x 3/8 Dr socket - 12, 13, 14, 15, 16, 17, 18, 19mm.1 x 3/8 Dr 16mm spark plug socket.1 x 3/8 Dr x Dr extension adaptor.1 x 3/8 Dr x 3in socket extension bar.1 x 3/8 Dr ratcheting socket handle.1 x bits driver.1 x 3/8 Dr x Dr extension adaptor.9 x combination wrench 8, 9, 10, 11, 12, 13, 14, 15, 16mm.Carbon steel plated.Blow moulded carry case included.