Epoxy Resin

Epoxy Resin

Epoxy Resin Repair Of Ancient Buildings

HC coating Network News: Abstract: Epoxy resin Has many good characteristics, in building maintenance, heritage conservation plays a very important role. In actual use, the use is very important.

Key words: epoxy resin repair of ancient architecture structure reinforcement

1 Introduction Epoxy resin is the molecule contains two or more genes of the organic polymer epoxy. Colorless, yellow or brown viscous liquid. Density (20 ) 1.1 ~ 1.2g/cm3. Cross-linked hard transparent resin, mostly yellow. Density 1.2-1.38g/cm3. Soluble Acetone , Fat, aromatic and chlorinated hydrocarbons. Crosslinked resin is stable. Insoluble in any organic Solvent . Polyester resin , Phenolic resin Than in the curing process show very low shrinkage (less than 2%).

(5) mechanical properties. Cured epoxy resin system with excellent mechanical properties.

(6) electrical properties. Cured epoxy resin system is a high dielectric properties, resistance to surface leakage, excellent insulation resistance arc.

(7) chemical stability. Typically, the cured epoxy resin system with excellent alkali resistance, acid resistance and solvent resistance. As curing epoxy system, like other properties, chemical stability also depends on the selected resin and Curing agent . Appropriate use of epoxy resin and curing agent, can make a special chemical stability.

(8) dimensional stability. Many properties of the integrated, so that epoxy resin has outstanding dimensional stability and durability.

(9) resistance to mold. Most resistant epoxy resin system cured mold can be used harsh tropical conditions.

3 repair of wooden structures Age-old wooden building, regardless of the main load-bearing components or decorative elements, are an integral part of the heritage buildings. If you take a simple replacement of maintenance practices, will reduce the heritage value, so as to retain the existing heritage building maintenance component is a basic principle. This can be applied to find an old wooden building components reinforcement bonding material, epoxy resin just right to meet this requirement. Epoxy resin used in the reinforcement of timber structures, mainly used for wooden pillars initiations, Liang Fang joints stick by, modulation epoxy Putty And so on and concrete construction technology are as follows:

3.1 wooden pillars Generally pests (especially termites) decay or rotten hollow, wooden pillars and the shell intact for water reinforcement approach. First column of the damaged parts of the slot 13cm knife saws sawing, keep sawing wood under the article to be cleared within the paste back into place after. Wooden pillars inside the rotten wood rotten or termite dust cleared, the notch of wood with epoxy paste back, and back sealing with epoxy putty around the joint and stakes of the above paste crack and hole size, water leaving the upper parts of water holes, sub-irrigation, each about 1M, poured into the unsaturated polyester material of about 3 ~ 4Kg? (excluding fillers) for each irrigation interval of 0.5h, until the filling date, the wooden pillars were ants termite damage parts of the surface with a ring epoxy resin pick up new material, with polyester putty to fill the size of the crack, filling material formula: unsaturated polyester resin ring has been ketone peroxide (curing agent) 3.2 Lanna tenon of production and the amount of cleaning will Lanna amount of viscous decay assembled and the extension removed, and the amount of centers in the Lanna width and thickness of sawn rather, about 70cm of d I (length and width and the length of Lanna amount) and the d population size produced two quite Fang, with alkali-free wax glass cloth sticking in the Fang, the brushing of unsaturated polyester resin slurry, brushing to algae and even to be resin, glass cloth Ling Yun was declared. Brushing process, brush off any air bubbles (bubbles will decrease strength glass fiber reinforced plastic), wrapping made of two glass fiber reinforced plastic shell pouring new tenon. After the glass because of the new tenon and mortise exit the Lanna good amount of the transfer agreement, and cracks with epoxy resin infusion, both tired of epoxy putty well, Lanna bond amount and the new parts were fitted together with polyester resin and glass cloth wound about 1cm thick, until the amount of cross section with a high degree of consistency Lanna (Lanna advance the amount of the removed section about 1cm). This made a 1cm thick glass fiber reinforced plastic hoop, using the formation of polyester resin shrinkage Hoop close. Wood surface cracks, holes and large defect filled with polyester resin putty fill compaction. D in the mouth in the brush on the wooden pillars anti-termite agents, connect Lanna amount assembled. Unsaturated polyester resin grout formula: unsaturated polyester resin (307 #): Cyclohexanone peroxide between dibutyl phthalate (curing agent): naphthalene Cobalt styrene (accelerator): quartz powder (320 mesh ) = 100:4:3:120 (weight ratio)

Epoxy putty formula: epoxy resin (6101 #): Polyamide (203 #): diethylenetriamine: acetone: ethanol: quartz powder (320 mesh) = 100:40:8:10:10:150 (weight)

Unsaturated polyester, curing agent and accelerator are belong to toxic, flammable, explosive materials, preparation of income distribution must be in order, and mix thoroughly then add the accelerator, the operation should make labor protection.

3.3 patch Liang Fang 1981 in Mount Wutai Nanzenji the maintenance of long-term decay, weathering and break the small minute fly mission? Flood-employed Lai is the thumb? Intestinal worm? Message after media milling Yoshiharu kill key Ying S did not cost bear in mind the narrow skeletal mane?? Kill vehicle mu? toad thumb? Jia Huang Zhen Chen enamel brag 4 trunk? mm wide cracks with crack pouring formula, less than 4mm wide crack injection formula. Treatment, the indoor temperature is maintained at 15-25 , easy to complete curing of epoxy resin to improve strength, the specific formula: Bond formula: 6101 100 +501 # # epoxy resin active diluent 10 + polyethylene polyamine 14

Pouring formula: 6101 100 +501 # # epoxy resin active diluent 15 + polyethylene polyamine 15.

Injection formula: 6101 100 +501 # # epoxy resin active diluent 20 + polyethylene polyamine 16.

3.4 Other component repair

Column foot wooden rafters of the old material and end of defects and decay parts of immersion can increase the strength of acrylic resin, epoxy resin where needed to be plastic. Column base of the pier to take in new material, the use of marketing and original wooden pillars connect with epoxy resin adhesive. Cross-section of wood is generally sold pillar section 1 / 4 of a length of 2 times the column diameter. Can be square or round. The first nest of white pillars with acrylic resin soaked, and then filled with epoxy polysulfide rubber. Doors and windows of the upper threshold, lower threshold of interfaces repaired with epoxy resin. Advantages and disadvantages of dealing with wood epoxy, curing few wrinkles, can be cold cured resin with flexibility and strength, pieces of treated wood, strength and markedly improved bacteria, insect damage, a variety of solutions and the impact of climate change, and so on has a strong resistance and tolerance.
About the Author

I am China Quality Digital writer, reports some information about gsi technology , oilless bearing.

Epoxy Adhesive Formulations $150 Unmodified, epoxy resins cause certain problems for both the adhesive formulator and end-user. They are often rigid and brittle; hence, impact resistance and peel strength are poor. For decades, Chemist have been vigorously working to minimize these major shortcomings. Based on a popular course sponsored by the Society of Plastics Engineers and written by an authority in the field, this comprehensive text presents a variety of methods to accomplish what up to now has been a formidable task. Beginning with epoxy chemistry, moving on to fillers, filler treatments, and surfactants, and ending with current and future development in formulating Epoxy Adhesives, this rigorous text addressed the problem of improving flexibility, durability and strength by adding chemical groups to the epoxy structure either via the base resin or the curing agent or by adding separate flexibilizing resins to the formulation to create an epoxy-hybrid adhesive.

Epoxy Resin Technology : Developments Since 1979 $46.8 No Synopsis Available

Resin Casting $68.51 High Quality Content by WIKIPEDIA articles Resin casting is a method of plastic casting where a mold is filled with a liquid synthetic resin which then hardens. It is primarily used for small scale production like industrial prototypes and dentistry. It can be done by amateur hobbyists with little initial investment, and has been appropriated for the production of collectible toys, models and figures, as well as small scale jewelry production. Most commonly a thermosetting resin is used that polymerizes by mixing with a curing agent at room temperature and normal pressure. The synthetic resins used include polyurethane resin, epoxy resin, unsaturated polyester resin and silicone resin. Epoxy resin has a lower viscosity than polyurethane resin and polyester resin shrinks quite a bit while curing. Author: Surhone, Lambert M./ Timpledon, Miriam T./ Marseken, Susan F. Binding Type: Paperback Number of Pages: 78 Publication Date: 2010/07/15 Language: English Dimensions: 6.00 x 9.02 x 0.19 inches

Quikrete? Epoxy Garage Floor Coating $84.95 QUIKRETE? products contain a special resin technology that works to maximize the bond between the floor coating and the concrete. This bond is 2-times stronger than the concrete itself, extending the life of your finish and giving you maximum durability.     Features: 2-times stronger than concrete for the toughest garage floor One coat gives a beautiful semi-gloss finish Durable high solids 2-part water-based epoxy One kit covers 250 square feet Available in light gray or tan     Application: STEP 1: Prepare Concrete surface using BOND?LOK? to clean, degrease and etch. STEP 2: Apply Epoxy Floor Coating Apply the epoxy in 2' x 6' sections using a premium-quality roller. Distribute the decorative flakes as you work your way out of the garage. You can walk on the surface in 12 hours, replace items in 24 hours and drive on it in 3 days.

Itw Consumer 7031 Epoxy 5 Minute Cement DevTube 1Oz $20.36 Devtube the original epoxy dispenser gives you correct amounts of resin and hardener automatically. No measuring required. The easiest way to make clear fast epoxy repairs. 1 oz.

Alessi FM15 R Colombina Stainless Steel Tray with Red Epoxy Resin Finish $95 Colombina tray was designed with the basic shape of the "Colombina collection" series: the rounded scalene triangle. At the same time this shape is presented as oriented but disoriented, which has no internal edge - would perfectly complete the extremely varied group intended by the designers. The tray is made from 1.2 mm thick stainless steel plate, lightly drawn and with no edging. 18/10 stainless steel or colored with epoxy resin. Design: Doriana and Massimiliano Fuksas, 2009 for Alessi, Italy. Approximate Size: 20" x 15.8" Type: Serving Pieces Color: Red Style: Formal

Devcon FlowMix 5 Minute Epoxy 20445 $24.25 Apply epoxy right where you need it without having to mix. Use for automotive or household repairs and hobbies. Works best on steel concrete fiberglass glass metal and rubber. 5 minute set time. Super high strength 1500 psi. Waterproof. Includes two InstaMix nozzles. Made in USA. Contains epoxy resin and polymercaptan amines. Length: 4. Width: 8.5. Height: 1.25

Uses of Epoxy Resins by Potter, W. G. [Hardcover] $125.78 Section I GENERAL Introduction 2 Why use Epoxy Resins? Section II SURF ACE COATINGS 3 Anticorrosive Paints 4 Marine Coatings 5 Coatings for Steel Pipes 6 Epoxy Powder Coatings Section III ELECTRICAL AND ELECTRONIC INSULATION 7 Rotating Machines 8 Distribution Switchgear and Transformers; Cable Jointing 9 Epoxy Resin Insulation for Outdoor Use 10 Electronic Applications; Printed Circuits Section IV CONSTRUCTION INDUSTRY 11 Floorings 12 Roads and Bridges 13 Adhesion and Grouting in Building 14 Grouts for Leveling; Miscellaneous Applications Section V OTHER PRINCIPAL APPLICATIONS 15 Composites 16 Adhesives 17 Arts and Crafts, Antiquities and the Home 18 Production Engineering Index Author: Potter, W. G. Binding Type: Hardcover Number of Pages: 296 Publication Date: 1976/02/15 Language: English Dimensions: 9.02 x 5.98 x 0.81 inches

Diversified Woodcraft 3516KFR No Sink Epoxy Right Side $5372.67 This unique LShaped unit is designed so four students can use the workstaiton while all facing the teacher. the unit has storage on the peninsula and on the wall It is made of oak and oak veneers with black powdercoat accents. This unit comes with a 1 epoxy resin top and a popup duplex outlet and data port. Finished with an earth friendly UV clear finish. This unit goes on the starboard side of the room. (Model shown is unit with sink)

Diversified Woodcraft HLB6030ER HiLo Bench 1X30X60 Epoxy $2212.88 HiLo benchDesigned with today s challenging ergonomic and ADA issues in mind. These tables allow the work surface to be adjusted for a comfortable and efficient positioning of the arms and hands. The 11 ranges goes from 25 to 36. Turning the hand crank 10 times moves the work surface 1. 1 epoxy resin top. 60 W x 30 D. Color: black.

Diversified Woodcraft HLB7230ER HiLo Bench 1X30X72 Epoxy $2439.54 HiLo benchDesigned with today s challenging ergonomic and ADA issues in mind. These tables allow the work surface to be adjusted for a comfortable and efficient positioning of the arms and hands. The 11 ranges goes from 25 to 36. Turning the hand crank 10 times moves the work surface 1. 1 epoxy resin top. 72 W x 30 D. Color: black.

Devcon High Strength 5Minute Fast Drying Epoxy 20845 $23.88 Devtube gives you correct amounts of resin and hardener automatically. No measuring required. The easiest way to make clear fast epoxy repair. 1 oz tube. Carded. Length: 1.88. Width: 7.88. Height: 3.88

Valspar Valspar Clear Garage Floor Epoxy 002.0050032.022 $82.91 Clear garage floor epoxy This water-based, 2-part epoxy provides the toughest garage floor protection in 1 coat This epoxy is fortified with new heavy-duty resin technology to provide superior durability It beautifies and protects with a durable clear finish that protects against damage from hot tires, gasoline, oil, scuffs, wear, and tear Do not apply this product over sealed surfaces Allow 60 days minimum for new concrete surfaces to cure before painting Clean and etch new or bare concrete with Bond-Lok cleaner 1 kit covers approximately 250 sq. ft. Dries to the touch in 8 to 12 hours, wait 12 to 24 hours for light foot traffic, 72 hours for automobile traffic Clean up with warm, soapy water Kit contains: Part A and B (1 gallon equivalent), 1 How To DVD, and 1 stir stick Brand #: Valspar 002.0050032.022 UPC: 080047020872 Keywords: concrete floor coating clear quikrete kit epoxy garage sealer paint

Valspar Valspar Gray Garage Floor Epoxy 002.0050020.022 $81.11 Gray garage floor epoxy This water-based, 2-part epoxy provides the toughest garage floor protection in 1 coat This epoxy is fortified with new heavy-duty resin technology to provide superior durability It beautifies and protects with a durable finish that protects against damage from hot tires, gasoline, oil, scuffs, wear, and tear Do Not apply this product over sealed surfaces Allow 60 days minimum for new concrete surfaces to cure before painting Clean and etch new or bare concrete with Bond-Lok cleaner 1 kit covers approximately 250 sq. ft. Dries to the touch in 8 to 12 hours, wait 12 to 24 hours for light foot traffic, 72 hours for automobile traffic Clean up with warm, soapy water Kit contains: Part A and B (1 gallon equivalent), 1 gallon Bond-Lok cleaner, 1 How To DVD, and 1 stir stick Gray kit comes with blue/black/white color flakes Tan kit comes with tan/brown/white color flakes Tintable base kits do not have color flakes Refer to model No. 002.000020C.000 for selection of decorative color flakes Gray kit (with blue color flakes) Brand #: Valspar 002.0050020.022 UPC: 080047020087 Keywords: garage floor paint epoxy concrete coating quikrete

Valspar Valspar Tan Garage Floor Epoxy 002.0050021.022 $81.11 Tan garage floor epoxy This water-based, 2-part epoxy provides the toughest garage floor protection in 1 coat This epoxy is fortified with new heavy-duty resin technology to provide superior durability It beautifies and protects with a durable finish that protects against damage from hot tires, gasoline, oil, scuffs, wear, and tear Do Not apply this product over sealed surfaces Allow 60 days minimum for new concrete surfaces to cure before painting Clean and etch new or bare concrete with Bond-Lok cleaner 1 kit covers approximately 250 sq. ft. Dries to the touch in 8 to 12 hours, wait 12 to 24 hours for light foot traffic, 72 hours for automobile traffic Clean up with warm, soapy water Kit contains: Part A and B (1 gallon equivalent), 1 gallon Bond-Lok cleaner, 1 How To DVD, and 1 stir stick Gray kit comes with blue/black/white color flakes Tan kit comes with tan/brown/white color flakes Tintable base kits do not have color flakes Refer to model No. 002.000020C.000 for selection of decorative color flakes Tan kit (with tan mixed flakes) Brand #: Valspar 002.0050021.022 UPC: 080047020094 Keywords: garage floor paint epoxy concrete coating quikrete

Valspar Valspar Light Base Garage Epoxy 002.0050026.022 $81.11 Light base garage epoxy This water-based, 2-part epoxy provides the toughest garage floor protection in 1 coat This epoxy is fortified with new heavy-duty resin technology to provide superior durability It beautifies and protects with a durable finish that protects against damage from hot tires, gasoline, oil, scuffs, wear, and tear Do Not apply this product over sealed surfaces Allow 60 days minimum for new concrete surfaces to cure before painting Clean and etch new or bare concrete with Bond-Lok cleaner 1 kit covers approximately 250 sq. ft. Dries to the touch in 8 to 12 hours, wait 12 to 24 hours for light foot traffic, 72 hours for automobile traffic Clean up with warm, soapy water Kit contains: Part A and B (1 gallon equivalent), 1 gallon Bond-Lok cleaner, 1 How To DVD, and 1 stir stick Gray kit comes with blue/black/white color flakes Tan kit comes with tan/brown/white color flakes Tintable base kits do not have color flakes Refer to model No. 002.000020C.000 for selection of decorative color flakes Light base kit (no color flakes) Brand #: Valspar 002.0050026.022 UPC: 080047020711 Keywords: garage floor paint epoxy concrete coating quikrete

Valspar Valspar Dark Base Garage Epoxy 002.0050027.022 $81.11 Dark base garage epoxy This water-based, 2-part epoxy provides the toughest garage floor protection in 1 coat This epoxy is fortified with new heavy-duty resin technology to provide superior durability It beautifies and protects with a durable finish that protects against damage from hot tires, gasoline, oil, scuffs, wear, and tear Do Not apply this product over sealed surfaces Allow 60 days minimum for new concrete surfaces to cure before painting Clean and etch new or bare concrete with Bond-Lok cleaner 1 kit covers approximately 250 sq. ft. Dries to the touch in 8 to 12 hours, wait 12 to 24 hours for light foot traffic, 72 hours for automobile traffic Clean up with warm, soapy water Kit contains: Part A and B (1 gallon equivalent), 1 gallon Bond-Lok cleaner, 1 How To DVD, and 1 stir stick Gray kit comes with blue/black/white color flakes Tan kit comes with tan/brown/white color flakes Tintable base kits do not have color flakes Refer to model No. 002.000020C.000 for selection of decorative color flakes Dark base kit (no color flakes) Brand #: Valspar 002.0050027.022 UPC: 080047020728 Keywords: garage floor paint epoxy concrete coating quikrete

Fiberglass Repair: Polyester or Epoxy (2nd Edition) $15.99 FIBERGLASS REPAIR, SECOND EDITION IS FILLED WITH EASILY ACCESSED INFORMATION, ALL AIMED AT GIVING A DETERMINED BOATOWNER THE NECESSARY SKILLS AND THE CONFIDENCE TO TACKLE TYPICAL FIBERGLASS REPAIRS, USING EITHER POLYESTER OR EPOXY RESIN. IN EVERY BOATING AREA, HUNDREDS OF FIBERGLASS BOATSTWENTY, THIRTY, EVEN FORTY YEARS OLDARE STILL AFLOAT, STILL PROVIDING ALL THE FUN OF BOATING BECAUSE THEIR OWNERS WERE WILLING AND ABLE TO DO THE REPAIR AND RESTORATION. Author: Aiken, David/ Aiken, Zora/ Aiken, David Binding Type: Paperback Number of Pages: 102 Publication Date: 2008/05/01 Language: English Dimensions: 8.45 x 5.65 x 0.31 inches

Henkel Corp Henkel Corp Loctite Marine Epoxy 1405604 $3.08 Loctite marine epoxy 0.85 fl. oz. This special marine epoxy can be applied underwater and cures underwater It sets in 50 minutes and will not shrink or expand This formula is also resistant to solvents and impacts This adhesive bonds metal, glass, ceramics, most plastics, tile, PVC pipes, copper pipes, brass pipes, and galvanized pipes Special syringe dispensers provide equal amounts of resin and hardener to ensure the proper mixture of epoxy every time Brand #: Henkel Corp 1405604 UPC: 079340352100 Keywords: marine adhesive loctite epoxy glue

1365868 - Loctite Epoxy Instant Mix - 0.47 Fl Oz - Clear $12.5 Self-mixing, epoxy syringe is a must for bonding jagged and poor-fitting surfaces. Two-part adhesive includes an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high-strength bond, which starts to set in 5 minutes and reaches handling strength in 1 hour. The static mix nozzle delivers a uniform mixture of resin and hardener every time. It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating. Use on metal, wood, ceramics, stone, glass, tile and most plastics. Epoxy does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled. [LOC1365868] HAZMAT UPC: 075353069240 UNSPC: 31201610 0.14 LB

Diversified Woodcraft 2406K 4 Student Cupboard Table Epoxy Top $2080.2 Four student cabinet table constructed of solid oak oak and hardwood veneers features a center cabinet with adjustable shelves locking doors and four locking drawers. Rubber base molding and leg boots finish the unit. Top is 1 black epoxy resin.

Diversified Woodcraft 2206K 2 Student Cupboard Table Epoxy Top $1314.14 Two student cabinet table constructed of solid oak oak and hardwood veneers features a center cabinet with adjustable shelf a locking door and two locking drawers. Rubber base molding and leg boots finish the unit. Top is 1 black epoxy resin.

Diversified Woodcraft C2206K 2 Student Cupboard Table Epoxy Top $1373.38 Two student cabinet table constructed of solid oak oak and hardwood veneers features a center cabinet with adjustable shelf book compartments in the aprons a locking door and two locking drawers. Rubber base molding and leg boots finish the unit. Top is 1 black epoxy resin.

Diversified Woodcraft C2306K 4 Student Cupboard Table Epoxy Top $1852.75 Four student cabinet table constructed of solid oak oak and hardwood veneers features a center cabinet with adjustable shelves book compartments in the aprons and locking doors. Rubber base molding and leg boots finish the unit. Top is 1 black epoxy resin.

Diversified Woodcraft C2106K 2 Student Cupboard Table Epoxy Top $1157.77 Two student cabinet table constructed of solid oak oak and hardwood veneers features a center cabinet with adjustable shelf book compartments in the aprons and locking door. Rubber base molding and leg boots finish the unit. Top is 1 black epoxy resin.

Diversified Woodcraft C2406K 4 Student Cupboard Table Epoxy Top $2198.66 Four student cabinet table constructed of solid oak oak and hardwood veneers features a center cabinet with adjustable shelves locking doors and four locking drawers. The aprons have book compartments. Rubber base molding and leg boots finish the unit. Top is 1 black epoxy resin.

J-b Weld J-b Weld 2oz Woodweld Epoxy 8251 $4.24 2oz woodweld epoxy 2-part quick setting wood epoxy adhesive with superior adhesion and cures stronger than the wood itself Repairs furniture, doors, door and window frames, hobby and craft projects, or any other wooden item Sets in 6 to 8 minutes with no clamping necessary Cures in 1 hour and can then be drilled, tapped, and painted Interior/Exterior Will not shrink, separate, or crack Includes 1 oz. resin and 1 oz. hardener Brand #: J-B Weld 8251 UPC: 043425082510 Keywords: epoxy adhesive interior exter quick setting wood

Dasco Products Fiberglass Handle Epoxy 888700 $24.17 Epoxy

Simpson Strong-tie Simpson Strong-tie 22oz. Epoxy Adhesive ET22 $25.19 22oz. epoxy adhesive. A 2-component, high-solids, epoxy-based system for use as a high-strength, nonshrink anchor grouting material Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle ET meets the ASTM C-881 specifications for Type I, II, IV, and V, Grade 3, Classes B and C, except gel time Uses: Threaded rod anchoring, rebar doweling, bonding hardened concrete to hardened concrete, pick-proof sealant around doors, windows, and fixtures, and paste-over for crack injection 22 oz. side-by-side cartridge Brand #: Simpson Strong-Tie ET22 UPC: 044315768200 Keywords: anchoring epoxy adhesive two component anchor adhesiv

Simpson Strong-tie Simpson Strong-tie 1.7oz Epoxy Adhesive SET1.7KTA $11.64 1.7oz epoxy adhesive A 2-component, 1:1 ratio, high solids, epoxy-based adhesive for use as a high-strength, nonshrink anchor grouting material Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle SET meets or exceeds the requirements of ASTM C-881 specification for Type I, II, IV, and V, Grade 3, Class B and C Used for threaded-rod anchoring, rebar doweling, bonding hardened concrete to hardened concrete, pick-proof sealant around doors, windows, and fixtures, and paste-over for crack injection When properly mixed SET adhesive will be a uniform light gray color Adaptor for standard caulking tool and 2 mixing nozzles included Capacity ounces: 1.7 (3.1 cu. in.) Brand #: Simpson Strong-Tie SET1.7KTA UPC: 707392134008 Keywords: epoxy adhesive tie anchoring concrete anchor 2 component

Simpson Strong-tie Simpson Strong-tie 22oz Epoxy Adhesive SET22 $35.28 22oz epoxy adhesive A side-by-side 2-component, 1:1 ratio, high-solids, epoxy-based adhesive for use as a high-strength, nonshrink anchor grouting material Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle SET meets or exceeds the requirements of ASTM C-881 specification for Type I, II, IV, and V, Grade 3, Class B and C Used for threaded-rod anchoring, rebar doweling, bonding hardened concrete to hardened concrete, pick-proof sealant around doors, windows, and fixtures, and paste-over for crack injection When properly mixed SET adhesive will be a uniform light gray color Capacity ounces: 22 (39.7 cu. in.) Must be used with the following dispensing tools: model No. EDT22B, EDT22AP, or EDT22CKT Mixing nozzle, model No. EMN22i, required (not included) Brand #: Simpson Strong-Tie SET22 UPC: 044315533402 Keywords: epoxy anchoring concrete anchor adhesive tie

Duckback Prod. Duckback Prod. 1 Part Wht Epoxy Coating SC6201-4 $37.97 1 part wht epoxy coating A solid color 1 part epoxy concrete stain with a unique blend of epoxy resin and 100% acrylic latex It offers the maximum durability of epoxy and the ease of application of acrylic latex-combined in a 1 part system Beautifies concrete surfaces while offering maximum resistance to oil, chemicals, marring, scuffing, and hot tire pick-up Ideal for interior and exterior concrete surfaces including garage floors, driveways, patios, porches, and walkways Covers approximately 300 to 500 sq. ft. per gallon Dry time: 1 hour to touch, 4 hours to re-coat, 24 hours light foot traffic, 72 hours heavy foot traffic, 7 days for vehicle traffic Available in 5 classic colors that can be tinted to a variety of other shades Contact Duckback for formulas White, gallon Brand #: Duckback Prod. SC6201-4 UPC: 740755620145 Keywords: epoxacryl coating concrete garage floor stain epoxy 1 part driveway

Duckback Prod. Duckback Prod. 1part Gray Epoxy Coating SC6202-4 $37.97 1part gray epoxy coating A solid color 1 part epoxy concrete stain with a unique blend of epoxy resin and 100% acrylic latex It offers the maximum durability of epoxy and the ease of application of acrylic latex-combined in a 1 part system Beautifies concrete surfaces while offering maximum resistance to oil, chemicals, marring, scuffing, and hot tire pick-up Ideal for interior and exterior concrete surfaces including garage floors, driveways, patios, porches, and walkways Covers approximately 300 to 500 sq. ft. per gallon Dry time: 1 hour to touch, 4 hours to re-coat, 24 hours light foot traffic, 72 hours heavy foot traffic, 7 days for vehicle traffic Available in 5 classic colors that can be tinted to a variety of other shades Contact Duckback for formulas Gray, gallon Brand #: Duckback Prod. SC6202-4 UPC: 740755620244 Keywords: epoxacryl coating concrete garage floor stain epoxy 1 part driveway

Duckback Prod. Duckback Prod. 1 Part Red Epoxy Coating SC6203-4 $37.97 1 part red epoxy coating A solid color 1 part epoxy concrete stain with a unique blend of epoxy resin and 100% acrylic latex It offers the maximum durability of epoxy and the ease of application of acrylic latex-combined in a 1 part system Beautifies concrete surfaces while offering maximum resistance to oil, chemicals, marring, scuffing, and hot tire pick-up Ideal for interior and exterior concrete surfaces including garage floors, driveways, patios, porches, and walkways Covers approximately 300 to 500 sq. ft. per gallon Dry time: 1 hour to touch, 4 hours to re-coat, 24 hours light foot traffic, 72 hours heavy foot traffic, 7 days for vehicle traffic Available in 5 classic colors that can be tinted to a variety of other shades Contact Duckback for formulas Red, gallon Brand #: Duckback Prod. SC6203-4 UPC: 740755620343 Keywords: epoxacryl coating concrete garage floor stain epoxy 1 part driveway

Duckback Prod. Duckback Prod. 1 Part Brn Epoxy Coating SC6204-4 $37.97 1 part brn epoxy coating A solid color 1 part epoxy concrete stain with a unique blend of epoxy resin and 100% acrylic latex It offers the maximum durability of epoxy and the ease of application of acrylic latex-combined in a 1 part system Beautifies concrete surfaces while offering maximum resistance to oil, chemicals, marring, scuffing, and hot tire pick-up Ideal for interior and exterior concrete surfaces including garage floors, driveways, patios, porches, and walkways Covers approximately 300 to 500 sq. ft. per gallon Dry time: 1 hour to touch, 4 hours to re-coat, 24 hours light foot traffic, 72 hours heavy foot traffic, 7 days for vehicle traffic Available in 5 classic colors that can be tinted to a variety of other shades Contact Duckback for formulas Brown, gallon Brand #: Duckback Prod. SC6204-4 UPC: 740755620442 Keywords: epoxacryl coating concrete garage floor stain epoxy 1 part driveway

Duckback Prod. Duckback Prod. 1 Part Grn Epoxy Coating SC6205-4 $37.97 1 part grn epoxy coating A solid color 1 part epoxy concrete stain with a unique blend of epoxy resin and 100% acrylic latex It offers the maximum durability of epoxy and the ease of application of acrylic latex-combined in a 1 part system Beautifies concrete surfaces while offering maximum resistance to oil, chemicals, marring, scuffing, and hot tire pick-up Ideal for interior and exterior concrete surfaces including garage floors, driveways, patios, porches, and walkways Covers approximately 300 to 500 sq. ft. per gallon Dry time: 1 hour to touch, 4 hours to re-coat, 24 hours light foot traffic, 72 hours heavy foot traffic, 7 days for vehicle traffic Available in 5 classic colors that can be tinted to a variety of other shades Contact Duckback for formulas Brand #: Duckback Prod. SC6205-4 UPC: 740755620541 Keywords: epoxacryl coating concrete garage floor stain epoxy 1 part driveway

ISN GOR4200102 8.75L x 3.5W Gorilla Epoxy $21.53 Gorilla Epoxy s twopart formula provides high impact resistance strength to handle the toughest projects. The easytouse reusable syearinge dispenses equal amounts of resin and hardener. Plus it s fast Gorilla Epoxy sets in 5 minutes and can be handled in 90 minutes. Low VOC and nontoxic once cured Gorilla Epoxy is safe for everyday handling. It s gapfilling capabilities and all purpose formula is perfect for multiple surface applications easily bonding steel wood aluminum stone glass brick concrete ceramics and much more. Sets in 5 minutes. Gap filling and drillable. Special impactresistant formula. Water and solvent resistant. Reusable syearinge. Dimensions: 8.75 L x 3.5 W x 1 H.

Diversified Woodcraft 3516KL Sink In Wall Epoxy Left Side $6294.31 This unique LShaped unit is designed so four students can use the workstaiton while all facing the teacher. the unit has storage on the peninsula and on the wall It is made of oak and oak veneers with black powdercoat accents. This unit comes with a 1 epoxy resin top and a 16 L x W x 6.8 D sink against the wall. Unit comes with two water/gas fixtures and a popup duplex outlet and data port. Finished with an earth friendly UV clear finish. This unit goes on the port side of the room.

Diversified Woodcraft 3516KR Sink In Wall Epoxy Right Side $6294.31 This unique LShaped unit is designed so four students can use the workstaiton while all facing the teacher. the unit has storage on the peninsula and on the wall It is made of oak and oak veneers with black powdercoat accents. This unit comes with a 1 epoxy resin top and a 16 L x W x 6.8 D sink against the wall. Unit comes with two water/gas fixtures and a popup duplex outlet and data port. Finished with an earth friendly UV clear finish. This unit goes on the starboard side of the room.

Itw Consumer Devcon Itw Consumer Devcon Flow-mix 2-ton Epoxy 23145 $3.34 Flow-mix 2-ton epoxy New state-of-the-art syringe automatically mixes epoxy hardener and resin for easy application Comes with 2 Insta-Mix nozzles which eliminates hand mixing and messy clean-up 30 minute cure time Joins the 60-second and 5-minute Flow-Mixes already in warehouse Brand #: ITW Consumer/ Devcon 23145 UPC: 078143231452 Keywords: adhesive epoxy glue 2 ton flow mix