Eobd Car

Eobd Car

HID xenon conversion kits trouble shootings and solution

HID installation trouble shooting and solution

 

1. Questions: The HID kit work normally after installation, but the instrument panel display “warning”.

(For example: Audi A4 1.8T, 06 BMW, near Sagitar, Mai Tang, Rui-ming, Fox, near Volvo, Peugeot 206, etc.)

 

Principle: The original car is 50W to 60W, but the HID kit is 35W, some luxury cars have the On-Board PC Diagnostics system (EOBD System), and the EOBD will detect the "power does not match", So bring on the “warning” or radiation interference when light turn on.

 

Solutions:

• Using the special relay harness with resistance (25W) can solve the problem, 25W+35W,it is just 60W, the power match with the cars, then the kit will pass the EOBD check.
• Replacing the 50W bulb and 50W ballast, it also can solve the problem.
• Using special ballast;
• install the anti-jamming device

 

2. Questions: After installation, the car PC panel damaged by the electromagnetism interfere circuit.

For example: Buick LaCrosse, Buick Lu respect, the modern Royal Cheung Premium, coupe, Grand Cherokee

 

Principle: The car use a special electronic circuit board, it is susceptible to interfere, After install HID kit, the circuit board easy damage or light “flicker” or go out.

 

Solutions:

• It is solved by the special ballast with the Dedicated circuit configuration.
• install the anti-jamming device

 

3. Questions: after installation the bulb will appear the hard flashing, or often off, or the two bulbs not bright at the same time and so on.

For example: 06 BMW X5, 3251,5201, Mercedes-Benz S350, S500, Land Rover, BMW 3 Series, etc.

 

Solutions:

• Show headlamps current line of work are normal.
• Adding install the special decoder which solve the hard flash and lacking of current. Has been successfully resolved the case:

A, Ford B, Skoda C, the general public from Yu D, Sagitar E, Mai Tang

3. Show headlamps line whether there is traffic through the computer, if passing ,decoders needed to be dedicated in order to return to normal. (The company Mercedes-Benz, BMW and other special decoder)

 

4. Questions: Because of H4 H/L is the light need match with dozens of headlamps assembly, the difference of lampshade will make the difference focus effect, so it is possible that the low beam or high beam will astigmatism after installation, please communicate with driver and tell the turth.

 

Such as:1. Polaris own the bad focus, it is suggest that replacing the assembly or special Polaris H/L from the factory.

• Hyundai Tucson, it must use the special H/L which own the shortest base.
• Old GL8, Mitsubishi, Pajero, Swifts, Blue bird all being astigmatism, must use special H4 H/L bulb.

 

5. Questions: The light detect circuit of 07 and 08 S350 MBZ,BMW 5 classic and 7 classic are the lasted kits, it would be better to install the special 50w bulbs and anti-interference ballast.

 

6. Questions: After installed the hid system ,when turn on the auto radio, there have the single interference problem while the lights in on.

 

Principle:the frequency singles in the hid ballast and auto radio are  incompatible .Sometimes the direction of the installed ballast also can lead to this problem.

 

Solution: Change the ballast position or adjust the ballast install direction can resolve the problem in some condition. Only shielded the ballast can resolve the single interference problem.

 

7. Questions: Just installed the HID system and everything works out fine with system ,but lately, it cann’t change light between high beam and low beam. After checking ,found the high beam fuse was blown. But the problem still up after changed the fuse when turn on the light.

 

Principle: Short circuit

 

Solution :

Firstly, Check the circuit carefully see weather there is any coating broken , disconnected ,connection wiring covered by the plasters or not and connected in the right line or not ,then remove and install a new ballast ,test and see weather still consist in the short circuit. If all above is fine then change the factory harness.

 

8. Questions: Some car moldes’ high beam after turn on for 10s ,one is on and the other is off.

 

Principle : Well,it occurred because of low current .As HID ballast need 8.5A or so to get start(then clam down to 3.5A or so in 1 or 2 min.),but most car original headlight circuit current was designed between 5.5A and 6.5A ,this bring the low current so that only 1 set HID  can get enough start current ,then the left 1 set is off .This situation would happened in some high-ends cars .

 

Solution :

• add 1 set reply circuit, get the current directly from the car battery.
• Check the connect between ballast 12v input end and socket see weather there is any loose .The connect loose can lead to HID light in a low current when the car is running and shaking ,when the car is uphill and down hill for example.
• HID light is High Intensity Discharge Lamp , The ballast have an increase of high pressure protection circuit ,when in the abnormal situation , the ballast works fine but this kind of problem still insisted .Please feel free to send back the ballast to us for check and test .

 

9. Questions: Just installed a H4 H/L moving kit , one work ,the other doesn’t work but can moving.

 

Principle :This could happen when the grand connect condition is not good , Bad plug wire or Power Input Plug and Play in the wrong way.

 

Solution :Change the plug to the anti way.

 

10, Questions:  Hyundai Coupe, after installed HID kit, start up engine and turn on the light, the light will “flicker” or go out; But turn off the engine, then turn on the light, the light work normally.

 

Principle: After installed HID kit, the HID light can work normally when the engine turn off. Once start up the engine, the light will “flicker” or go out, the car gauges set’s displayed failure light at the same time. The reason is auto Headlamp control line need passed the “check” by car PC system, however the HID work principle and work power is different to Halogen lamp, so the “check” can’t get any signal of the HID kit, let’s the check failure.

 

Solution: Our company have design a specail Auto PC check relay harness, can be match with HID kit.

 

11, Questions: PASSAT, after installed the HID kit, the Auto CD audio will pause when change High beam and Low beam, why?

 

Priciple: The reason is the pulse-frequency which arise from start up the HID kit is same as car’s frequency, the pulse-frequency make the car receive wrong signal, bring on the CD audio is pause.

 

Solution: Our company was design a special ballast for the car electric PC system, the problem can be solve after install it.

 

12. Questions:  the lamp stock of BUICK EXCELLE is too small to put the bulbs in. how can I solve this problem?

  

Solution: Just drill the lamp stock to a bigger one ( Note: pls drilling with your hands pill the drill out, in case the residual powder would caused unnecessary trouble.

 

13. Questions:  Why the Low/high light can be lighted up but is unable to change reciprocally after I installed the Bi-xenon HID light on the Mazda M6?

  

Principle: this is resulted from faults in the electrical circuit.

 

Solution: firstly, check the circuit of the original headlights and the circuit of the input power of the ballast; if there is no problem with them. Then pls check out whether the fuse in harness and the car have been disabled by fusing. If all things go well, then pls just change the connector plugs, coz the connector plugs may be plugged-in in a wrong way

 

14. Questions:  How to adapt the light?

  

Solution: Firstly, park the car evenly about 10 meters away from the wall with its head right towards it (tips: you can make a note to ensure the accurate distance)

Note: To adapt the light, the car should be under the normal load standard without any additional load.

2. Turn on the light, pls notice the aperture which was projected on the wall, that is the basis for adapting. The distance from the midpoint between the two lights to the front tread  should be the same with the distance projected on the wall. Otherwise, the progress of adapting will have to be carried out according to the 3rd step;

 The distance between the central point of the right light to the ground should be the same with the distance between the central point of the right light to the projected shape on the wall. While, the distance between the central point of the left light should be 10CM higher than the that.

     3. adapting them in the same line. The light on the left should project straight forward, on the other hand, the light on the right can project to the right slightly. Coz it can brighten the road on the right hand and make you see more clearly especially it is foggy.

     4. pls cover one of the light with a piece of thick cloth so as to adapt effectively according to the changes of the light beam projected from one of the light. To do this, you will have to prepare 2 screwdrivers (one for adapting the height of light beam, and the other one for adapting the width of it)

 

15. Questions:  How to inspect the bulb be lighted up and what is the solution if it is unable to be lighten up?

 

Solution: The several reasons for why the bulbs can not be lighted up: the accumulator?ballast or bulb isn’t working anymore?the cable of power supplier or fuse is broken?imperfect connection with the power supplier? misconnecting with the poles of power supplier. According to these reasons, we can eliminate one by one.

• check whether the bulb is workable.

If it is the problem with the bulb, the bulb will let out noise when it is connected with power (sometimes, there will be electrical sparkle inside of the bulb). If the ballast doesn’t let out any noise, that means the problem doesn’t lies in the bulbs.

• check whether the ballast is workable.

start up the whole system with another ballast. If the bulb doesn’t light on, that means the ballast is unworkable.

• check whether the poles is misconnected.

     Connect the poles the other way around, if the bulb still doesn’t light on, that means the problem doesn’t lies on this point.

 

• check whether the fuse is disabled due to fusing.

This inspection can be carried out directly with your eyes, or with the help of a universal electric meter after pulling the fuse down.

• check whether the accumulator is workable.

Replace another accumulator to see whether the bulb can light on. If the can not still, that means there is no problem with accumulator.

• if it is still unable to check out the key problem after all the steps mentioned above, pls check the hook-up wire. Make sure all of them is correctly connected without any looseness on the point of connection.
• change another hoop-up wire

About the Author

Scan Tool LCD OBD-2 / EOBD Car Diagnostic Auto Code Scanner $74.83 - Scan Tool is a kind of professional car OBD2 EOBD code reader diagnostic scanner tool. - Functions:- Displays the DTC definitions- Reads and clears all generic, and some manufacturer, specific DTCs- Works with CAN-equipped vehicles- Resets check engine lights- Views OBD-II Freeze Frame data- Determines the Malfunction Indicator lamp (MIL) status- I/M readiness status- Retrieves the Vehicle Identification Number (VIN)- Scanning live data- Saves scanning Data (memory: 4MB)- Features:- CD Manual withall codes explained- Saves up to 38 scans for later viewing- Screencontrast adjustment and backlight- Car Compatibility:? U.S.- European - Japanese - Asian - German - Korean Models- Specific Model Compatibility:Suitable for almost all cars after 2001 (EOBD-II)?

OBDMATE OM500 JOBD/OBDII/EOBD Code Reader $59.99 FunctionsWorks on all after 1996 OBD II compliant US, European and Asian vehiclesEasily determines the cause of the Check Engine Light (MIL)Turn off Check Engine Light (MIL) and clear codes Software upgradeable via standard USB cable Supports CAN (Controller Area Network), all other current JOBD and OBDII/EOBD protocols and with reading and clearing DTCCompliantwithOBDII16PINTOYOTA\HONDA\DAIHATSU\MITSUBISHI\MAZDA\NISSAN\SUZUKI\SUBARUSoftware upgradeable via internetFeaturesOBDMATE OM500 Scan Tool is designed to work on all JOBD/OBDII/EOBD compliant vehicles. OBDMATE OM520 can do car protocols including the CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000 protocols.Package List1 x OBDMATE OM500 JOBD Code Reader main unit1 x User's Manual1 x USB update cable1 x Carry case

Autosnap CR800 OBDII EOBD MINI Code Reader $46.99 FunctionsSmall in size and conveniently fits in handWorks on all 1996 and later OBDII compliant US, European and Asian vehiclesEasily determines the cause of the "Check Engine Light (MIL)"Retrieve generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codesTurn off Check Engine Light (MIL), clear codes and reset monitorsView freeze frame dataDisplay live data amp; DTC definitionsDisplay I/M readiness statusIdentifies pending codesRetrieve vehicle information (VIN)Supports CAN (Controller Area Network) and all other current OBD-II protocols (ISO9141, KWP 5BAUD INIT, KWP ADDR INT, KWP FAST INIT, J1850 PWM, J1850 VPW)Highly reliable and easy to useLanguage: English, Spanish, FrenchFeaturesAUTOSNAP CR800 OBDII/EOBD Code Reader a mini hand-held device to diagnose your vehicle. It supports all OBDII protocol on all OBDII/EOBD compliant vehicles to enable car owner or technicians to accurately diagnose engine problems. This code reader has a simple and fashionable design, to make your vehicle service experience much easier!Package List1 x CR800 Main Unit1 x User manual1 x Plastic package

OBD2 ECU Remap Flash TUNING TOOL EOBD-II Galletto 1260 $32.99 Product Galletto 1260 ECU Flash ToolCompatible Car Brands: Audi, BMW, Chevrolet (Daewoo), Chrysler, Citroen, Ferrari, Fiat Alfa Lancia, Ford, GM Opel, Hyundai, Honda, Isuzu, Iveco, Kia, Man, Maserati, Mercedes, Mini, Mitsubishi, Nissan, Porsche, Renault, Rover, Saab, Seat, Sangyong, Smart, Suzuki, Toyota, Volkswagen, VolvoCompatibility: Vehicle must be OBDII compatibleOBDII Plug: 16-pin (Male)USB: 2.0 and backward compatibleSoftware Compatibility: Windows 98SE, ME, 2000, XPDimensions: Length = 4 feet (122cm)Manufacturers Ref: FUWJSYN2SAProduct NotesUser friendly software includedTune your engine with just this cable and your laptopIncrease the responsiveness of your vehicle at all rev rangesSavings on fuel efficiency mean this cable pays for itselfPackage ContentsModel CVFG-A15 Galletto 1260 OBDII EOBD ECU Flashing Cable2x2 VAG adapterCD with softwareFAQ - Frequently Asked QuestionsDoes this cable let me perform chip tuning?Technically, "chip tuning" refers to physically replacing ECU ROM. With this cable, you do not have to physically replace or alter any hardware in your vehicle. Simply plug one end of this cable into your vehicle's OBD port and the other end into your computer. You can now perform ECU flashing on your computer.Can I flash all of my ECUs?Some ECUs can not be flashed with this OBDII connector.Do I need to have my engine on to flash my ECUs?No, you only need to have your ignition on.Once I've connected this cable to my car, how do I read data from my car's ECUs?First turn the ignition on to position 2. Do not turn on the engine. Select the ECU you want to access from a list. Click the read button to access the original data. Save the file to your computer's hard drive for editing.How do I write data to my car's ECUs?First turn the ignition on to position 2. Do not turn on the engine. Select the ECU you want to access from a list. Click the write button and follow the instructions on screen. When you are finished, turn off the ignition and wait 10 seconds. That's it!There are a lot of terms I don't understand, like engine control units (ECUs), brake horsepower (BHP), and flashing. What do they all mean?Please check Wikipedia for a detailed explanation of these and other terms that are new to you.I don't know anything about cars or ECUs or flashing. Can I use this cable?Actually, using this cable and its software interface is so easy that if you can use a computer, you can definitely use it. However you should probably ask your friends or a mechanic for help before you start writing to your car's ECUs. But don't worry, if you make a backup of your car's data first, you will be restore your car's data if you make a mistake later.

MaxScan GS500 2.9 LCD OBDII/EOBD Car Diagnostic Auto Scanner $80.79 - This is the best solution for troubleshoot all 1996 and newer OBD2 compliant vehicles- The scan tool delivers all nine OBD2 test modes, retriving live engine datastream and parameters to enable technicians to accurately diagnose the toughest problems- Works with all 1996 and later OBD3 compliant US,European and Asian vehicles- Reads and clears generic OBD2 trouble codes(including pending codes)- Reads and clears selected GM/Ford/Chrysler/Toyota OBD2 manufacturer-specific codes- Turns off check engine light(MIL)- Views freeze frame data- Display monitor and I/M readiness status(emissions)- Reads live PCM data stream- Display live 02 sensor test data- Performs modles present test- Retrieves vehicle information(VIN,CIN,and CVN)- Support CAN(controller area network) and all other current OBD2 protocls- Built-in OBD2 DTV lookup library- Large easy-to-read lcd screen display dtv definitions- Extremely easy to use and highly reliable

MaxScan GS500 2.9' LCD OBDII/EOBD Car Diagnostic Auto Scanner $51 SpecificationsDimensions: 7.09 in x 3.74 in x 1.46 inWeight: 24.09 oz

OBD2 Scanner V1.4 USB Plastic OBDII EOBD CANBUS Scanner $17.99 HighlightCar OBD-II Diagnostics ToolEasy setup - plug and play with instant wireless connection to your Apple deviceOBD standard (works with most cars and models)Save on expensive car maintenance costsSpecificationSupports 9 protocols in all - SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2 and ISO 14230-4 as well as CAN Bus ISO 15765-4. Precision-moulded diagnostic connector made to fit all VW/Audi vehicles, even those with "tight" trim around diagnostic socket. USB port design. Internal EEPROM can remember the last protocol. Voltage input monitors your vehicle's battery. Technical Specification:Scanner Based - Datasheet OBDII Plug: J1962 16-Pin Male (to Car) USB Port : (to Computer or PDA) High quality UL certified USB Cable (equivalent to CE). CAN (ISO 15765-4) SAE J1850 PWM SAE J1850 VPW ISO 9141-2 ISO 14230-4 Automatically searches for the correct protocol or can be configured manually. USB Port Serial Interface uses AT commands to look like a modem. Status LED Length with USB Lead : 1.5 metres New for v1.4:General Items: RS232 baud rates to 500 Kbps Adaptive Timing automatically adjusts ST timeouts Power up to AT MA is selectable Source (tester) address can be changed Can reset all PPs with a jumper Receive addresses can be independently set Power Control with a low power standby mode A 4800 baud ISO option A non-volatile memory location for storing user data CAN extended addressing support You can now perform ISO/KWP bus initializations without having to send a request An SS command allows searching through the OBD protocols sequentially A new TA command allows the Tester Address to be easily changed Factory calibration for the voltage reading circuit can be easily restored J1850: Complete control over in frame responses (IFRs) Delay before protocol 2 helps with some GM/Holden vehicles ISO 9141 and ISO 14230: The slow initiation address can now be varied Control over key word checking KWP protocols can now transmit 3 or 4 byte headers CAN: New J1939 protocol Two user-definable CAN protocols Improved error handling and recovery Extended addressing supportHow To Use:Turn the car's ignition switch on. No need to start the engine. Start the software program, click "Options", select the correct communications port. Your interface now works! Make sure the software can reliably access all the control modules that it should in your car.

MaxiScan GS500 2.8 LCD OBD-2 / EOBD Car Diagnostic Auto Code Scanner $76.66 - Works with all 1996 and later OBD-2 compliant US, European and Asian vehicles- Reads and clears generic OBD-2 trouble codes(including pending codes)- Reads and clears selected GM/Ford/Chrysler/Toyota OBD-2 manufacturer-specific codes- Turns off check engine light(MIL)- Views freeze frame data- Display monitor and I/M readiness status(emissions)- Reads live PCM data stream- Displays live 02 sensor test data- Performs modles present test- Retrieves vehicle information(VIN, CIN and CVN)- Supports CAN(Controller Area Network) and all other current OBD-2 protocols- Built-in OBD-2 DTC lookup library- Large easy-to-read LCD screen displays DTC definitions- Extremely easy to use and highly reliable

MaxScan VAG405 LCD Code Reader Can OBDII/EOBD Car Diagnostic Scanner $72.85 - The MaxScan VAG405 Scanner is an OEM level diagnostic tool compatible with OBD2, CAN-BUS & VW / Audi vehicles sold worldwide. By simply plugging it into your vehiclesdiagnostic socket, you will be able to Read & Erase trouble codes. Advanced featuresfor VW, Audi, Seat & Skoda vehicles like Reseting service lights. Works on engine, ABS, Airbags, transmission, radio, climate control, instruments, immobilizer & more- Works with Volkswagen and Audi(Audi/Seat Skoda/Jetta/Golg/Beetle/Touareg/GTI/Passat and more) sold worldwide since 1990- Reads and erases Diagnostic trouble cides(DTCs)of most electronically controlled vehicle moudles,including engine,ABS,airbags,transmission,radio,climate control(A/C),cent.elect,steering wheel,instruments,immobilizer,etc.- Reads and clears generic trouble codes of cars using ISO 9141-2("CARB"),ISO 14230("KWP-2000") and ISO-15765("CAN") protocols- Turns off MIL lights of engine,airbags,ABS,A/T and most other systems- C.A.N.(Control Area Network) Capability- Reset oil service light- Retrieves vehicle information(VIN)- Displays I/M readiness status- Display DTC definitions on Unit Screen- Highly reliable and accurate- Easy to use with friendly interface- Safely communicates with the on-board computers- Large,easy to read backlit LCD- System upgradeable via internet- Stand-alone unit with no need for an additional laptop computer to operate

OBD2 EOBD Scan Tool VS600 $76.99 FeaturesThe Scan Tool VS600 OBDII/EOBD Scanner supports all nine OBDII test modes on all OBD2 compliant vehicles to enable technicians to accurately diagnose even the toughest problems. Sophisticated yet easy-to-use!Works on all 1996 amp; later OBD2 compliant US, European and Asian vehiclesEasily determines the cause of the "Check Engine Light (MIL)"Retrieves generic (P0, P2, P3, amp; U0) and manufacturer specific (P1, P3, and U1) codesTurns off Check Engine Light, clears codes amp; resets monitorsDisplays DTC definitions on screenViews freeze frame dataDisplays monitor amp; I/M readiness status (emissions)Identifies pending codesReads live PCM DataStreamDisplays live O2 sensor test dataGraphs data (1996 and newer)Reads, stores and playbacks live sensor dataMemory/battery backup for off-vehicle data review and analysisBilingual interface and definitions English/SpanishPerforms modules present testRetrieves vehicle information (VIN, CID and CVN)Supports CAN (Controller Area Network) amp; all other current OBD2 protocols.Built-in OBD2 DTC lookup libraryLarge easy-to-read backlit LCD screenSoftware upgradeable via internetPrints data via PC

OBD2 EOBD Scan Tool vs600 $62.25 Caratteristiche lo strumento di analisi vs600 OBDII / EOBD scanner supporta tutte le nove modalità di prova OBDII OBD2 su tutti i veicoli compatibili per consentire ai tecnici di diagnosticare con precisione anche i problemi più difficili. sofisticato, ma semplice da usare! funziona su tutti i 1996 e successive conformi OBD2 noi, europei ed auto asiatiche determina facilmente la causa della "spia di controllo motore (mil)" recupera generico (p0, p2, p3, e u0) e produttore specifico (P1, P3, e U1) spegne controllare motore di luce, elimina i codici e azzera monitor Definizioni delle esposizioni DTC sullo schermo viste freeze frame dati display del monitor i / m condizione di prontezza (emissioni) individua codici in attesa letture dal vivo pcm datastream visualizza vivere o2 dati di test del sensore dati grafici (1996 e successivi) legge, negozi e playback vivono i dati dei sensori memoria / batteria di backup per i veicoli off-revisione dei dati e analisi interfaccia bilingue e definizioni inglese / spagnolo esegue moduli di test presenti recupera informazioni del veicolo (VIN, CID e CVN) Supporta CAN (Controller Area Network) e tutti gli altri attuali protocolli OBD2. built-in OBD2 biblioteca di ricerca dtc grande di facile lettura-display lcd retroilluminato software aggiornabile via internet stampa dei dati tramite pc

obd2 EOBD scan ferramenta vs600 $62.25 características a ferramenta de verificação vs600 scanner OBDII / EOBD suporta todas as nove modalidades de teste OBDII OBD2 em todos os veículos conformes com a permitir que os técnicos para diagnosticar com precisão até mesmo os problemas mais difíceis. sofisticado, mas fácil de usar! obras em todos os 1996 e mais tarde compatível obd2 nós, europeu e veículos asiáticos facilmente determina a causa da "luz do motor da verificação (mil)" recupera genérico (p0, p2, p3, u0) e fabricante específico (P1, P3 e U1) desliga-se verificar a luz do motor, limpa códigos e redefine monitores apresenta definições DTC em tela visualizações de dados de quadro de congelamento displays monitor i / m estado de prontidão (emissões) identifica códigos pendentes lê ao vivo pcm datastream displays viver dados de teste do sensor de O2 gráficos de dados (1996 e mais recentes) lê, lojas e playback vivem dados do sensor memória / bateria para fora do veículo, revisão e análise de dados Interface bilíngüe e definições Inglês / Espanhol realiza módulos de teste presente recupera informações do veículo (VIN, CID e CVN) suportes CAN (Controller Area Network) e todos os outros protocolos OBD2 atuais. built-in obd2 biblioteca de pesquisa dtc grande de fácil leitura com luz de fundo da tela LCD atualizável software via internet impressões de dados via PC

obd2 eobd outil d'analyse vs600 $62.25 traits l'outil d'analyse vs600 OBDII / EOBD scanner prend en charge tous les modes de neuf essais OBDII sur tous les véhicules OBD2 conformes pour permettre aux techniciens de diagnostiquer avec précision même les problèmes les plus difficiles. sophistiqué et pourtant facile à utiliser! travaux sur chacun des 1996 et plus tard obd2 conforme nous, européens et asiatiques de véhicules permet de déterminer facilement la cause de la «lumière de contrôle moteur (mil)" récupère génériques (P0, P2, P3, et U0) et spécifique au fabricant (P1, P3, et U1) s'éteint la lumière de moteur, efface les codes et réinitialise moniteurs Définitions des affichages DTC à l'écran les données vues d'arrêt sur image affichages d'écran et d'état de préparation i / m (émissions) identifie les codes en suspens lit en direct pcm flux de données affiche des données en direct o2 essais de la sonde des données graphiques (1996 et plus récent) lit, les magasins et les playback vivent des données de capteurs la mémoire / batterie de secours pour le véhicule ou l'examen des données et l'analyse interface bilingue et définitions Anglais / Espagnol effectue des modules de test présente renseignements relatifs aux véhicules récupère (vin, CID et CVN) supports peuvent (Controller Area Network) et tous les autres protocoles OBD2 courants. construite en obd2 bibliothèque de recherche dtc large facile à lire l'écran LCD rétroéclairé Mise à niveau du logiciel via Internet imprime les données via un PC

OBD2 EOBD Scan-Tool VS600 $62.25 Features das Scan-Tool VS600 OBDII / EOBD Scanner unterstützt alle neun OBDII Testmodi auf allen OBD2 konformer Fahrzeuge zu ermöglichen Technikern genau zu diagnostizieren, auch die schwierigsten Probleme. anspruchsvolle und dennoch einfach zu bedienen! Arbeiten über alles 1996 später OBD2 konformen uns, europäische und asiatische Fahrzeuge leicht ermittelt die Ursache des "Check Engine Licht (mil)" Holt die generische (P0, P2, P3, und U0) und Hersteller-spezifische (P1, P3 und U1) Codes schaltet Motorkontrollleuchte, löscht Codes zurücksetzt Monitore Definitionen der Anzeigen DTC auf dem Bildschirm Ansichten Freeze Frame Daten Displays Monitor I / M Readiness Status (Emissionen) identifiziert anhängig Codes Live-PCM-Datenstrom liest O2-Sensor-Displays leben Testdaten Graphen Daten (1996 und neuer) liest, speichert und leben Playbacks Sensordaten Speicher / Batterie-Backup für Off-Fahrzeugdaten Überprüfung und Analyse zweisprachige Benutzeroberfläche und Definitionen Englisch / Spanisch führt Module vorhanden Test Holt Trägerinformationen (VIN, CID und CVN) unterstützt CAN (Controller Area Network) und alle anderen gegenwärtigen Protokolle OBD2. Einbau-OBD2 DTC Nachschlagenbibliothek großes, leicht ablesbares LCD-Display mit Hintergrundbeleuchtung Software-Upgrade über Internet Druckt Daten über PC

obdmate om500 JOBD / OBDII / EOBD-Code-Leser $48.5 Funktionen funktioniert auf allen nach 1996 OBD II gefällig uns, europäische und asiatische Fahrzeuge leicht ermittelt die Ursache für die Check-Engine Licht (mil) auszuschalten check engine light (mil) und klare Codes Software-Upgrade über Standard-USB-Kabel unterstützt CAN (Controller Area Network), alle anderen aktuellen JOBD und OBDII / EOBD Protokolle und mit Lesen und Löschen dtc compliantwithobdii16pintoyota \ honda \ daihatsu \ mitsubishi \ mazda \ nissan \ suzuki \ subaru Software-Upgrade über Internet Features obdmate om500 Scan-Tool wurde entwickelt, um auf allen JOBD / OBDII / EOBD kompatiblen Fahrzeuge arbeiten. obdmate om520 tun können Auto-Protokolle einschließlich der kann, J1850 PWM, J1850 VPW, ISO9141 und KWP2000 Protokolle. Paket-Liste 1 x obdmate om500 JOBD-Code-Leser Hauptgerät 1 x Bedienungsanleitung 1 x USB-Update-Kabel 1 x Tragetasche

MaxiScan MS310 OBD II/EOBD Code Reader $49.95 The MaxiScan?MS310 OBD II/EOBD Code Reader provides you with easy and quick access to the diagnostic trouble code that is causing your vehicle's problem. It easily retrieves diagnostic trouble codes (DTCs) and code definitions on all OBD II/EOBD compliant vehicles sold worldwide since 1996. This compact and professional reader has the same functions and benefits as large expensive diagnostic scanners.     Features: Works with all 1996 and later OBD II compliant US, European and Asian vehicles Easily determines the cause of the Check Engine Light ( MIL) Retrieve generic (P0, P2, P3 and U0), manufacturer specific (P1, P3 and U1) codes and pending codes Turns off Check Engine Light(MIL), clear codes and reset monitors Displays DTC definitions on unit screen Displays complete live engine data stream View freeze frame data States OBD II check (emissions) Displays monitor and I/M readiness status (emissions) Multilingual menu and DTC definitions, English, Spanish, French, German and etc Retrieves vehicle information (VIN, CIN and CVN) USB cable included for product updates Free internet software updates via USB Interface Supports CAN (Controller Area Network) and all other current OBD II protocols Limited One (1) Year Warranty Comes With: MaxiScan?MS310 Tool User's Manual CD software USB cable

AutoSnap cr800 OBDII EOBD Mini-Code-Leser $37.99 Funktionen klein und passt bequem in der Hand Arbeiten über alles 1996 und später OBDII kompatibel uns, europäische und asiatische Fahrzeuge leicht ermittelt die Ursache für die "check engine light (mil)" Abrufen generische (P0, P2, P3 und U0) und Hersteller-spezifische (P1, P3 und U1) Codes auszuschalten check engine light (mil), klare Codes und Reset-Monitore Blick Freeze Frame Daten Anzeige von Live-Daten und DTC-Definitionen Anzeige I / M Status identifiziert schwebende Codes Abrufen Fahrzeuginformationen (vin) unterstützt CAN (Controller Area Network) und alle anderen aktuellen OBD-II-Protokolle (ISO9141, KWP 5baud init, kwp addr int, kwp schnell init, J1850 PWM, J1850 VPW) äußerst zuverlässige und einfach zu bedienen Sprache: Englisch, Spanisch, Französisch Features AutoSnap cr800 OBDII / EOBD-Code-Leser ein Mini-Handgerät an Ihrem Fahrzeug zu diagnostizieren. Es unterstützt alle OBDII Protokoll auf allen OBDII / EOBD kompatiblen Fahrzeuge Autobesitzer oder Techniker zu ermöglichen, genau zu diagnostizieren Motorprobleme. Diese Code-Leser hat ein einfaches und modernes Design, um Ihr Fahrzeug Service-Erfahrung viel leichter! Paket-Liste 1 x cr800 Hauptgerät 1 x Bedienungsanleitung 1 x Kunststoff-Paket

AULAL510 AutoLink Pro OBDII/EOBD Scan Tool $221.11 Features and Benefits: . Works on all 1996 and later OBDII compliant US European and Asian vehicles. Live Data displays complete OBDII vehicles data stream; reads graphs stores and playback live sensor data. Specialized continuous update screen for readiness monitors with an audible completion. Multilingual menu and DTC definitions English Spanish and French. Free professional software updates via the Internet The AutoLink Pro AL510reg; OBDII / EOBD Scanner specially developed for the US market supports all nine modes of OBDII functionality displays onscreen graphing and prints data on all OBDII compliant vehicles to enable technicians to accurately diagnose even the toughest problems. Includes complete OBDII Bidirectional controls. Views freeze frame data and identifies pending codes. Displays monitor test results and I/M readiness status (emissions) as well as live O2 sensor test data. Sophisticated yet easytouse this professional grade scan tool is built to perform for todayrsquo;s demanding service needs. Includes manual CD and USB data cable for free updates and printing functions.

OBD2 EOBD herramienta de análisis VS600 $62.25 características la herramienta de análisis VS600 OBDII / EOBD escáner es compatible con todos los nueve modos de prueba OBDII en todos los vehículos compatibles con obd2 que permitan a los técnicos para diagnosticar con precisión incluso los problemas más difíciles. sofisticado pero fácil de usar! obras en el 1996 y más adelante nos OBD2 compatible, europeo y asiático, los vehículos determina fácilmente la causa de la "luz de verificación del motor (MIL)" Recupera genéricos (P0, P2, P3, y U0) y específicos del fabricante (P1, P3, y U1) se apaga la luz de verificación del motor, borra los códigos y reinicializa los monitores Muestra definiciones DTC en la pantalla vistas de datos de imagen detenida pantallas de monitor y de I / M estado de preparación (emisiones) identifica los códigos pendientes lee en vivo PCM flujos de datos pantallas viven o2 datos de prueba de sensores gráficos de datos (1996 y posteriores) lee, tiendas y reproducciones en vivo los datos del sensor memoria / batería de respaldo para revisión fuera del vehículo y análisis de datos interfaz bilingüe y las definiciones de Inglés / Español lleva a cabo módulos de prueba de la actualidad recupera la información del vehículo (VIN, CID y CVN) Soporta CAN (Controller Area Network) y todos los otros protocolos actuales OBD2. incorporado en la biblioteca de búsqueda de OBD2 DTC grande y fácil de leer pantalla LCD retroiluminada Software actualizable a través de Internet imprime los datos a través de PC

OBD2 EOBD Scan Tool VS550 $69.99 FeaturesThe super Scan VS550 includes many professional features in an inexpensive scan tool.The scan tool delivers all nine OBDII test modes, retrieving live engine DataStream and parameters to enable technicians to accurately diagnose the toughest problems. Features amp; Benefits Reads amp; clears generic OBD II trouble codes (including pending codes) Turns off check engine light (MIL) Displays Generic Codes P0, P2, P3, U0 and Manufacturer Specific Codes P1, P3, and U1 Displays OBD2 monitor and I/M readiness Status Detects OBD-II Freeze Frame Information Reads live PCM data stream Displays live O2 sensor test data Performs Modules Present Test Supports CAN (Controller Area Network) and all other current OBD-II protocols Built-in OBD-II DTC lookup library State Emissions Check (OBD2) Retrieves Vehicle information (VIN, CID and CVN) Determines the malfunction indicator lamp (MIL) status Code definitions displayed on unit screen Unit updateable via Internet Highly reliable and accurate Easy-to-read crystal-clear backlit large 128 x 64 LCD display (2.8" x 1.7") Safely communicates with the on-board computer Communication Protocols Included:C.A.N. (Controller Area Network) J1850 PWM J1850 VPW KWP2000 (ISO14230-4) ISO 9141 VEHICLE COVERAGE:BMW(1996~2005)BMW3,BMW5,X5,Z3,Z4,Z8,740i,750i,BMW Mini,E60,745i,745Li,765Li.Chrysler (1996~2008)Daewoo-Lanos, Daewoo-Leganza, Daewoo-NubiraFORD (1996~2008)GM (1996~2008)GEO prism, Honda/Acura, Hyundai, Isuzu, JaguarKia, land Rover, Mazda, Mazda-Ford, FordMercedes, MitsubishiNissan, PROSCHESubaru, Suzuki, Volvo, Rolls Royce 4

OBD2 EOBD Scan Tool vs550 $56.59 Caratteristiche il super scan vs550 include molte caratteristiche professionali in uno strumento di analisi economica. lo strumento di analisi fornisce tutte le nove modalità di prova OBDII, il recupero di flusso di dati e parametri del motore in diretta per consentire ai tecnici di diagnosticare con precisione i problemi più difficili. Caratteristiche e vantaggi legge e cancella codici di difficoltà generici di OBD II (compresi i codici in attesa) si disattiva controllare motore di luce (mil) visualizza generico codici p0, p2, p3, u0 e fabbricante specifico codici p1, p3, e u1 visualizza OBD2 monitor e i / m condizione di prontezza OBD-II rileva le informazioni fermo letture dal vivo pcm flusso di dati visualizza vivere o2 dati di test del sensore esegue moduli di test presenti Supporta CAN (Controller Area Network) e tutti gli altri attuali protocolli OBD-II built-in OBD-II biblioteca di ricerca dtc stato di controllo delle emissioni (OBD2) recupera informazioni del veicolo (VIN, CID e CVN) determina la lampada spia di malfunzionamento (MIL) status definizioni di codice visualizzato sullo schermo dell'unità Unità aggiornabile via internet altamente affidabile e preciso di facile lettura-crystal-clear retroilluminato da 128 x 64 display LCD (2,8 "x 1,7") comunica in modo sicuro con il computer di bordo protocolli di comunicazione inclusi: può (Controller Area Network) J1850 PWM J1850 VPW KWP2000 (ISO14230-4) iso 9141 Copertura del veicolo: bmw (1996 ~ 2005) bmw3, bmw5, X5, Z3, Z4, Z8, 740i, 750i, bmw mini, E60, 745i, 745li, 765li. chrysler (1996 ~ 2008) -daewoo Lanos, Leganza-daewoo, daewoo-nubira ford (1996 ~ 2008) gm (1996 ~ 2008) geo prisma, Honda / Acura, Hyundai, Isuzu, Jaguar kia, land rover, mazda, mazda-ford, ford mercedes, mitsubishi nissan, Prosche subaru, suzuki, volvo, rolls royce 4

obd2 eobd outil d'analyse vs550 $56.59 traits le super scan vs550 inclut de nombreuses fonctionnalités professionnelles dans un outil d'analyse peu coûteuse. l'outil d'analyse offre tous les modes de neuf essais OBDII, la récupération de flux de données du moteur en direct et les paramètres pour permettre aux techniciens de diagnostiquer avec précision les problèmes les plus difficiles. Caractéristiques et avantages lit et annule les codes génériques obd trouble II (y compris les codes en attente) Arrête la lumière de moteur (mil) affiche générique codes P0, P2, P3, u0 et fabricant p1 par des codes, P3, et U1 affiche obd2 moniteur et l'état de préparation i / m détecte OBD-II des informations d'arrêt sur image lit en direct pcm flux de données affiche des données en direct o2 essais de la sonde effectue des modules de test présente supports peuvent (Controller Area Network) et tous les autres courants protocoles OBD-II construite en OBD-II bibliothèque de recherche dtc Etat des émissions de chèque (obd2) renseignements relatifs aux véhicules récupère (vin, CID et CVN) détermine le feu indicateur de dysfonctionnement (MIL) statut définitions des codes affichés sur écran de l'unité mis à jour l'unité via internet très fiable et précis facile à lire cristalline rétroéclairé grand LCD 128 x 64 affichage (2,8 "x 1,7") communique en toute sécurité avec l'ordinateur de bord protocoles de communication inclus: peut (controller area network) J1850 PWM J1850 VPW kwp2000 (ISO14230-4) ISO 9141 la couverture du véhicule: bmw (1996 ~ 2005) BMW3, bmw5, x5, Z3, Z4, Z8, 740i, 750i, bmw mini, E60, 745i, 745Li, 765li. chrysler (1996 ~ 2008) daewoo lanos-, daewoo-Leganza, daewoo nubira- Ford (1996 ~ 2008) g (1996 ~ 2008) géo prisme, Honda / Acura, Hyundai, Isuzu, Jaguar kia, land rover, mazda, mazda-ford, ford mercedes, mitsubishi nissan, Prosche Subaru, Suzuki, Volvo, Rolls Royce 4

OBD2 EOBD Scan-Tool vs550 $56.59 Features Der Super-Scan vs550 beinhaltet viele professionelle Funktionen in einem kostengünstigen Scan-Tool. das Scan-Tool liefert alle neun OBDII Testmodi, Abrufen Live-Datenstrom und Motor-Parameter, damit Techniker genau zu diagnostizieren, die schwierigsten Probleme. Leistungsmerkmale und Vorteile liest löscht die generische OBD II Fehlercodes (einschließlich schwebende Codes) Schaltet Motorkontrollleuchte (MIL) zeigt generischen Codes P0, P2, P3, U0 und Hersteller spezifische Codes P1, P3 und U1 zeigt OBD2 überwachen und I / M Status erkennt OBD-II-Freeze-Frame-Informationen liest Live-PCM-Datenstrom O2-Sensor-Displays leben Testdaten führt Module vorhanden Test unterstützt CAN (Controller Area Network) und alle anderen aktuellen OBD-II Protokolle Einbau-OBD-II DTC Nachschlagenbibliothek Zustand Emissionen Scheck (OBD2) Holt Trägerinformationen (VIN, CID und CVN) bestimmt die Fehlfunktion Kontrollleuchte (MIL) Status Codedefinitionen am Gerät angezeigt Einheit über Internet aktualisierbar höchst zuverlässige und genaue easy-to-read kristallklaren hintergrundbeleuchtete große 128 x 64 LCD-Display (2,8 "x 1,7") sicher kommuniziert mit dem Bordcomputer Kommunikationsprotokolle enthalten: CAN (Controller Area Network) J1850 PWM J1850 KWP2000 (ISO14230-4) ISO 9141 Fahrzeug-Abdeckung: BMW (1996 ~ 2005) bmw3, bmw5, X5, Z3, Z4, Z8, 740i, 750i, BMW Mini, E60, 745i, 745Li, 765li. Chrysler (1996 ~ 2008) Daewoo Lanos-, Daewoo-leganza, Daewoo Nubira- Ford (1996 ~ 2008) GM (1996 ~ 2008) Geo-Prisma, Honda / Acura, Hyundai, Isuzu, Jaguar Kia, Land Rover, Mazda, Mazda-Ford, Ford Mercedes, Mitsubishi Nissan, Prosche Subaru, Suzuki, Volvo, Rolls Royce 4

obdmate om500 JOBD / OBDII / EOBD leitor de código $48.5 funções funciona em todos depois de 1996 obd ii compliant nós, veículos europeus e asiáticos facilmente determina a causa da luz do motor da verificação (mil) desligar luz de verificação do motor (mil) e códigos claro atualizável via software cabo USB padrão suporta CAN (Controller Area Network), todos os outros protocolos atuais JOBD e OBDII / EOBD e com a leitura e limpeza dtc compliantwithobdii16pintoyota \ honda \ daihatsu \ mitsubishi \ mazda \ nissan \ suzuki \ subaru atualizável software via internet características obdmate om500 ferramenta de verificação é projetado para funcionar em todos os JOBD / OBDII / EOBD veículos compatíveis. obdmate om520 pode fazer protocolos, incluindo o carro pode, PWM J1850, J1850 VPW, ISO9141 e KWP2000 protocolos. lista de pacotes 1 x obdmate om500 JOBD código de unidade de leitura principal Manual 1 x de usuário 1 x usb cabo de atualização 1 x estojo

obdmate om500 JOBD / OBDII / EOBD lettore di codice $48.5 funzioni funziona su tutti dopo il 1996 OBD II compatibile con noi, i veicoli europei ed asiatici determina facilmente la causa della luce del motore del controllo (mil) Spegnere il motore spia di controllo (mil) e codici chiaro software aggiornabile tramite cavo USB standard supporti possono (Controller Area Network), tutti gli altri protocolli attuali JOBD e OBDII / EOBD e con la lettura e la compensazione dtc compliantwithobdii16pintoyota \ honda \ daihatsu \ mitsubishi \ mazda \ nissan \ suzuki \ subaru software aggiornabile via internet Caratteristiche obdmate om500 strumento di analisi è stato progettato per funzionare su tutti i JOBD / OBDII / EOBD veicoli compatibili. obdmate om520 può fare protocolli di auto tra cui la lattina, pwm J1850, J1850 VPW, ISO9141 e KWP2000 protocolli. la lista dei pacchetti 1 x obdmate om500 JOBD lettore di codice unità principale 1 x Manuale d'istruzione 1 x cavo usb aggiornamento 1 x custodia

obdmate om500 JOBD / OBDII / EOBD lecteur de code $48.5 fonctions fonctionne sur tous les après 1996 OBD II conforme nous, les véhicules européens et asiatiques détermine facilement la cause de la lumière check engine (mil) éteignez la lumière check engine (mil) et des codes clairs évolutive du logiciel via un câble USB standard supports peuvent (Controller Area Network), tous les autres protocoles et JOBD OBDII / EOBD en cours et à la lecture et de compensation dtc compliantwithobdii16pintoyota \ honda \ Daihatsu \ Mitsubishi \ mazda \ nissan \ suzuki \ subaru évolutive du logiciel via Internet caractéristiques obdmate om500 outil d'analyse est conçu pour fonctionner sur tous les JOBD / OBDII / EOBD véhicules conformes. obdmate om520 pouvez faire protocoles voiture, y compris la boîte, J1850 PWM, J1850 VPW, ISO9141 et KWP2000 protocoles. liste des paquets 1 x obdmate om500 JOBD lecteur de code unité principale 1 x manuel 1 x USB Câble mise à jour 1 x mallette

obdmate om500 JOBD / OBDII / EOBD lector de código de $48.5 funciones funciona en todos los posteriores a 1996 OBD II nosotros, los vehículos europeos y asiáticos determina fácilmente la causa de la luz del motor (MIL) apagar la luz del motor del cheque (mil) y borrar códigos software actualizable a través de un cable USB estándar apoyos pueden (Controller Area Network), todos los otros protocolos actuales OBDII JOBD y / EOBD y con la lectura y la limpieza dtc compliantwithobdii16pintoyota \ Honda \ daihatsu \ mitsubishi \ mazda \ nissan \ Suzuki \ subaru software actualizable a través de internet características obdmate om500 herramienta de análisis está diseñado para trabajar en todos los JOBD / OBDII / EOBD compatible con los vehículos. obdmate om520 puede hacer protocolos de aparcamientos, así como la CAN, J1850 PWM, J1850 VPW, ISO9141 y protocolos KWP2000. la lista de paquetes 1 x obdmate om500 JOBD código de la unidad principal lector 1 x Manual de instrucciones 1 x USB cable de actualización 1 x maletín de transporte

CS602 Color Screen Codescan OBDII EOBD Scanner $82.99 HighlightCS602 Codescan OBDII EOBD Scanner is specially designed to work with all OBD II compliant vehicles, including Control Area Network (CAN). It is required by EPA that all 1996 and newer vehicles (cars and light trucks) sold in the United States must be OBD II compliant and this includes all American, Asian and European vehicles.Retrieve and erase trouble codes;View freeze frame data;View live data with graph;I/M Readiness test;O2 sensor monitor test;On board monitor test;DTC lookupRecord and playback history dataSpecificationWorks on all 1996 and later OBDII compliant US, European and Asian vehicles;Support all 10 OBDII test modes, including the latest SOA mode;Support diagnostic protocol including SAE J1850 PWM/VPW, ISO 9141-2, ISO 14230-4(KWP), ISO15765-4(11bit and 29bit CAN)Support Multi-language operation;Uses 2.8'' color LCD display;Retrieves generic codes and manufacturer specific and resets monitors;View freeze frame data;View live PCM datastream;Graphs live datastream;Read live O2 sensors test data;Read vehicle information(VIN, CID and CVN);Record and playback history data;Build in OBDII DTC lookup libray.CS602 outline:Cable with OBDII connector--Connect CS602 to the vehicle'data link connector;LCD Display--Indicate test result;Exit Button--Return to previous menu;5/7 Right/Left Buttons--Move cursor right or left for selection;Or turn page up or down when more than one page is displayed;4/6 Up/Down Buttons--Move cursor up or down for selection;USB Port--Connect CS602 to computer for update online;Enter Button--confirm a selection(or action) from a menu list.Help Button--Show help information for user;Power Port--Power supply of 12V;A Red LED indicator lamp--confirmed DTC; When it displays"Confirmed DTC", the red indicator lamp will light on;B Yellow LED indicator lamp--Pending DTC; When it not sure or unknown DTC, the yellow indicator lamp will light on;C Green LED indicator lamp--No DTC; When they are no DTC, the green indicator lamp will light on;D Blue LED indicator lamp--USB; Dispaly the status of usb communication when updating.Screen: 2.8" TFT 262K true color, 320 240 QVGA LCD displayInput voltage range: 8~32VOperating current: lt;100mA@Power consumption: lt;1.2W (Typical)Operating temperature: 32°F~122°F / 0Storage tempetature: -4°F~158°F / -20°C ~70°C @Outline dimension: 4.7' 3.2' 1.0' / 121 82 26 mm LWHWeight : lt;17.6 oz (500g)Vehicle Coverage:The CS602 is specially designed to work with all OBD II compliant vehicles, including Control Area Network (CAN). It is required by EPA that all 1996 and newer vehicles (cars and light trucks) sold in the United States must be OBD II compliant and this includes all American, Asian and European vehicles.A small number of 1994 and 1995 model year gasoline vehicles are OBD II compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the Vehicle Emissions Control Information (VECI) Label, which is located under the hood or by the radiator of most vehicles. If the

cs602 Farbbildschirm codescan OBDII EOBD Scanner $67.1 Höhepunkt cs602 codescan OBDII EOBD Scanner wurde speziell entwickelt, um mit allen OBD II konformer Fahrzeuge, einschließlich der Kontrolle Area Network (CAN) zu arbeiten. es wird von epa erforderlich, dass alle 1996 und neueren Fahrzeugen (Pkw und leichte Nutzfahrzeuge) in den Vereinigten Staaten verkauft wird, muss die OBD II gefällig sein und dazu gehören alle amerikanischen, asiatischen und europäischen Fahrzeugen. abrufen und löschen von Fehlercodes, Blick Freeze Frame Daten; Blick von Live-Daten mit Grafik; i / m Bereitschaft zu testen; o2 Sensor Monitor-Test; an Bord überwachen zu testen; dtc lookup Aufnahme und Wiedergabe historischer Daten Spezifikation Arbeiten über alles 1996 und später OBDII kompatibel uns, europäische und asiatische Fahrzeuge; Unterstützung alle 10 OBDII Testmodi, einschließlich der neuesten SOA-Modus; Unterstützung Diagnoseprotokoll darunter SAE J1850 PWM / VPW, ISO 9141-2, ISO 14230-4 (kWp), ISO15765-4 (11bit und 29bit kann) Unterstützung mehrsprachiger Betrieb; verwendet 2,8''Farb-LCD-Display; ruft generischen Codes und herstellerspezifische und setzt überwacht; Blick Freeze Frame Daten; Livebilder pcm Datenstrom; Grafiken Live-Datenstrom; Lesen Sie leben o2 Sensoren Testdaten; Lesen Fahrzeuginformationen (vin, cid und CVN); Aufnahme und Wiedergabe historischer Daten; bauen in OBDII dtc lookup libray. cs602 Überblick: Kabel mit OBDII-Stecker - Anschluss cs602 die vehicle'data Link-Anschluss; LCD-Anzeige - zeigt Testergebnis; Exit-Button - zum vorherigen Menü zurückzukehren; 5 / 7 rechts / links Tasten - bewegen Sie den Cursor nach rechts oder links zur Auswahl, oder wenden Seite nach oben oder unten, wenn mehr als eine Seite angezeigt wird; 4 / 6 up / down Tasten - bewegen Sie den Cursor nach oben oder unten zur Auswahl; USB-Anschluss - Schließen Sie cs602 den Computer für die Aktualisierung online; Enter-Taste - eine Auswahl bestätigen (oder Aktion) aus einem Menü-Liste. Hilfe-Taste - zeigt Hilfeinformationen für Benutzer; Netzanschluss - Stromversorgung von 12V; eine rote LED-Anzeige - dtc bestätigt; wenn es ", bestätigte dtc" zeigt, die rote Signallampe leuchtet auf; b gelbe LED-Anzeige - bis dtc; wenn es nicht sicher, oder unbekannte dtc die gelbe Kontrollleuchte auf Licht; c grüne LED-Anzeige - keine dtc; wenn sie nicht dtc sind, die grüne Kontrollleuchte leuchtet auf; d blaue LED-Anzeige - usb; Dispaly den Status der USB-Kommunikation bei der Aktualisierung. Bildschirm: 2,8 "TFT-262K True Color, 320 240 QVGA-LCD-Display Eingangsspannungsbereich: 8 ~ 32V Betriebsstrom: lt;100mA @ Stromverbrauch: lt;1,2 W (typisch) Betriebstemperatur: 32 ° f ~ 122 ° F / 0 Lagerung tempetature: -4 ° F bis 158 ° F / -20 ° C ~ 70 ° c @ Aussenabmessungen: 4,7 " 3,2" 1,0 "/ 121 82 26 mm LxBxH Gewicht: lt;17,6 Unzen (500g) Fahrzeug Deckung: die cs602 ist speziell für alle OBD-II-konformer Fahrzeuge, einschließlich der Kontrolle Area Network (CAN) zu arbeiten. es wird von

RAC Car Fault Code Reader. $89.99 Modern cars have a built-in diagnostic system called OBDII or EOBD which your garage will plug into to help determine any faults. You can now plug into this system yourself. Find out what is really wrong with your car before taking it to the garage. Check for faults on second hand cars before buying.Diagnostic scanner features.Read and reset fault codes.Reset check engine light.Compatible with all petrol engine cars manufactured since 2001 and all diesel engine cars manufactured since 2004.Read and reset fault codes.Reset check engine light.Size H11, W7.5, D2.2cm.Accessories includedScan tool.User manual.OBDII cable.Carry case.Code definitions CD.This scanner will not cure faults identified this must be done by a mechanic

cs602 screen a colori codescan OBDII EOBD scanner $67.1 evidenziare cs602 codescan OBDII EOBD scanner è appositamente progettato per funzionare con tutti i veicoli compatibili con OBD II, tra cui reti di controllo di area (può). è richiesto dall'EPA che tutti i 1996 ed i nuovi veicoli (autovetture e autocarri leggeri) ha venduto negli Stati Uniti deve essere compatibile con OBD II e questo include tutto americano, i veicoli asiatici ed europei. recuperare e cancellare i codici di difficoltà; visualizzare i dati freeze frame; visualizzare i dati in diretta con il grafico; i / test di prontezza m; o2 sensore test del monitor; sul test monitor di bordo; dtc ricerca registrazione e riproduzione di dati storici specificazione funziona su tutti i 1996 e più tardi OBDII compatibile con noi, i veicoli europei ed asiatici; supportare tutte le 10 modalità di prova OBDII, compresa l'ultima modalità SOA; Il supporto del protocollo diagnostico compresi SAE J1850 PWM / VPW, ISO 9141-2, ISO 14230-4 (kWp), iso15765-4 (11bit e 29bit può) supporto multi-lingua funzionamento; usa 2,8''display LCD a colori; recupera codici generici e produttore specifico e monitor resetta; visualizzare i dati freeze frame; live view pcm flusso di dati; grafici vivere flusso di dati; leggere dal vivo sensori O2 dati di test; leggere le informazioni del veicolo (VIN, CID e CVN); registrazione e riproduzione di dati storici; costruire in ricerca biblioteca dei OBDII DTC. cs602 schema: cavo con connettore OBDII - cs602 collegare al connettore di collegamento vehicle'data; Display LCD - indicano risultato del test; uscita pulsante - tornare al menu precedente; 5 / 7 a destra / sinistra - spostare il cursore a destra oa sinistra per la selezione, o girare pagina verso l'alto o verso il basso quando più di una pagina viene visualizzata; 4 / 6 su / giù - spostare il cursore su o giù per la selezione; Porta USB - cs602 collegare al computer per l'aggiornamento on-line; enter - confermare una selezione (o azione) da un elenco di menu. Pulsante Guida - informazioni di aiuto spettacolo per utente; Porta di alimentazione - alimentazione 12v; un rosso lampada a led - ha confermato dtc, quando si visualizza "confermato DTC", la spia rossa si accenderà; b led giallo spia - in attesa di dtc, quando non è sicuro o dtc sconosciuto, la spia gialla si accende; c led verde spia - non dtc, quando non sono dtc, la spia verde si accenderà; d led blu spia - usb; dispaly lo stato della comunicazione USB durante l'aggiornamento. schermo: 2,8 "TFT a colori da 262k vero, 320 240 QVGA display lcd range di tensione d'ingresso: 8 ~ 32V operativo corrente: lt;100mA @ Consumo: lt;1,2 W (tipico) temperatura di esercizio: 32 ° F ~ 122 ° F / 0 stoccaggio tempetature: -4 ° F ~ 158 ° F / -20 ° C ~ 70 ° c @ delineare dimensione: 4,7 ' 3.2' 1.0 '/ 121 82 26 millimetri LWH Peso: lt;17,6 once (500g) veicolo di copertura: il cs602 è appositamente progettato per funzionare con tutti i veicoli compatibili con OBD II, tra

cs602 écran couleur codescan OBDII EOBD Scanner $67.1 mettre en évidence cs602 codescan OBDII EOBD Scanner est spécialement conçu pour fonctionner avec tous les véhicules OBD II conforme, y compris Control Area Network (CAN). il est requis par l'EPA que tous les 1996 et les nouveaux véhicules (voitures et camions légers) vendus aux Etats-Unis doivent être OBD II conforme et ceci inclut tous les américains, les véhicules asiatiques et européens. de récupérer et d'effacer les codes d'anomalie; afficher les données Freeze Frame; afficher les données en direct avec graphique; i / test de réceptivité m; capteur O2 moniteur de test; à bord moniteur de test; lookup dtc d'enregistrer et de données historique de lecture spécifications fonctionne sur tous les 1996 et plus tard conforme OBDII nous, les véhicules européens et asiatiques; soutenir toutes les 10 modes de test OBDII, y compris la dernière mode de la SOA; support du protocole de diagnostic, y compris SAE J1850 PWM / VPW, ISO 9141-2, ISO 14230-4 (kWc), ISO15765-4 (11bits et 29bit peut) support multi-langue de fonctionnement; utilise 2,8''LCD couleur; récupère les codes génériques et spécifiques du fabricant et surveille réinitialise; afficher les données Freeze Frame; Live View PCM Datastream; graphes direct Datastream; lire les données en direct O2 tester les capteurs; lire les informations du véhicule (VIN, CID et CVN); d'enregistrer et de données historique de lecture; construire dans OBDII recherche dtc libray. cs602 aperçu: câble avec connecteur d'OBDII - connectez cs602 le connecteur de liaison vehicle'data; Écran LCD - indiquent résultat du test; bouton de sortie - revenir au menu précédent; 5 / 7 à droite / gauche des boutons - curseur à droite ou à gauche pour déplacer la sélection, ou tourner la page vers le haut ou le bas lorsque plus d'une page est affichée; 4 / 6 boutons haut / bas - déplacer le curseur vers le haut ou le bas pour la sélection; Port USB - connecter à l'ordinateur cs602 pour mise à jour en ligne; ENTER - confirmer une sélection (ou action) à partir d'une liste de menus. bouton d'aide - Aide pour montrer pour l'utilisateur; port d'alimentation - alimentation de 12v; une lampe LED rouge - a confirmé dtc, quand il affiche "confirmé dtc", le voyant rouge s'allume sur le; b led jaune voyant - dans l'attente DTC, quand il n'est pas sûr ou dtc inconnu, la lampe témoin jaune s'allume sur le; c voyant vert LED - pas de DTC, quand ils ne sont pas dtc, le voyant vert s'allume sur le; d led bleu lampe témoin - USB; représenterez le statut de la communication USB lors de l'actualisation. l'écran: 2,8 "TFT 262k couleurs vraies, 320 240 écran LCD QVGA plage de tension d'entrée: 8 ~ 32v opérationnel courant: lt;100mA @ Consommation: lt;1.2W (typique) Température de fonctionnement: 32 ° F ~ 122 ° F / 0 tempetature de stockage: -4 ° F ~ 158 ° F / -20 ° C ~ 70 ° C @ dimension aperçu: 4,7 " 3.2" 1.0 "/ 121 82 26 mm LWH poids: lt;17.6 oz (500g) la couverture du véhicule: l'cs602

cs602 pantalla a color codescan OBDII EOBD escáner $67.1 destacar cs602 codescan OBDII EOBD escáner está especialmente diseñado para trabajar con todos los vehículos compatibles con OBD II, incluyendo la red de control de área (CAN). es requerido por la EPA que todos los 1996 y los nuevos vehículos (automóviles y camiones ligeros) que se venden en los Estados Unidos debe ser compatible con OBD II y esto incluye a todos los vehículos americanos, asiáticos y europeos. recuperar y borrar los códigos de problemas; ver los datos de congelación de fotogramas; ver datos en tiempo real con el gráfico; i / m prueba de la disposición; o2 sensor monitor de prueba; prueba a bordo del monitor; dtc búsqueda grabar y reproducir los datos la historia especificación Trabajos sobre el 1996 y más tarde OBDII compatible con nosotros, los vehículos europeos y asiáticos; apoyo a todos los 10 modos de prueba OBDII, incluyendo el último modo de SOA; El soporte del protocolo de diagnóstico, incluyendo SAE J1850 PWM / VPW, ISO 9141-2, ISO 14230-4 (kWp), ISO15765-4 (11bit y 29bit puede) soporte multi-idioma de funcionamiento; utiliza 2,8''pantalla LCD a color; recupera los códigos genéricos y específicos del fabricante y reinicializa los monitores; ver los datos de congelación de fotogramas; ver en vivo pcm flujo de datos; gráficos de flujo de datos en vivo; leer en vivo sensores o2 datos de prueba; leer la información del vehículo (VIN, CID y CVN); grabar y reproducir los datos la historia; construir en OBDII búsqueda dtc libray. cs602 esquema: cable con conector OBDII - cs602 conectar al conector de enlace de vehicle'data; Pantalla LCD - indica resultado de la prueba; botón de salida - volver al menú anterior; 7.5 a la derecha / izquierda botones - derecha o izquierda mueve el cursor de selección, o dar vuelta la página hacia arriba o hacia abajo cuando más de una página se muestra; 4.6 arriba / abajo - mueve el cursor hacia arriba o hacia abajo para la selección; Puerto USB - para conectar a la computadora para cs602 de actualización en línea; el botón ENTER - confirmar una selección (o acción) de una lista de menús. el botón de ayuda - Muestra información de ayuda para el usuario; puerto de alimentación - Fuente de alimentación de 12v; una luz roja LED indicador - confirmó dtc, cuando se muestra ", confirmó dtc", el indicador rojo se encenderá; b led amarillo indicador - en espera de DTC, cuando no está seguro o dtc desconocido, el indicador amarillo se encenderá; c led verde indicador - no dtc, cuando no son DTC, el indicador luminoso verde se encenderá; d LED azul indicador de la lámpara - usb; dispaly el estado de la comunicación USB al actualizar. Pantalla: 2.8 "TFT de 262k colores verdaderos, 320 240 QVGA LCD de pantalla Rango de voltaje: 8 ~ 32V Corriente de funcionamiento: lt;100 mA Consumo de energía: lt;1.2W (típico) temperatura de funcionamiento: 32 ° F ~ 122 ° F / 0 tempetature de almacenamiento: -4 ° F ~ 158 ° F / -20 ° C ~ 70 ° C @ dimensión de esquema: 4.7 "

AutoSnap cr800 OBDII EOBD mini-leitor de código $37.99 funções de tamanho pequeno e cabe convenientemente na mão funciona em todos os 1996 e mais tarde compatível OBDII nós, veículos europeus e asiáticos facilmente determina a causa da "luz do motor da verificação (mil)" recuperar genérico (p0, p2, p3, e u0) e específicos do fabricante (p1, p3, e U1) desligar luz de verificação do motor (mil), códigos claros e monitores redefinir visualizar os dados quadro congelado exibir dados ao vivo e definições dtc mostrar i / m estado de prontidão identifica códigos pendentes recuperar as informações do veículo (VIN) suporta CAN (Controller Area Network) e todos os outros atuais protocolos de OBD-II (ISO9141, kWp 5baud init, int addr kWp, kWp rápido init, J1850 PWM, J1850 VPW) altamente confiável e fácil de usar Idioma: Inglês, espanhol, francês características AutoSnap cr800 OBDII / EOBD dispositivo leitor de código de um mini-portátil para diagnosticar o seu veículo. ele suporta todos os protocolos OBDII em todos os veículos OBDII / EOBD compatível para habilitar proprietário do carro ou técnicos para diagnosticar com precisão problemas no motor. este leitor de código tem um design simples e elegante, para tornar a sua experiência de serviço do veículo muito mais fácil! lista de pacotes 1 x cr800 unidade principal 1 x manual do usuário 1 pacote de plástico x

AutoSnap cr800 OBDII EOBD mini lettore di codice $37.99 funzioni di piccole dimensioni e si adatta comodamente alla mano funziona su tutti i 1996 e più tardi OBDII compatibile con noi, i veicoli europei ed asiatici determina facilmente la causa della "spia di controllo motore (mil)" recuperare generici (p0, p2, p3, e u0) e produttore specifico (P1, P3, e U1) codici Spegnere il motore spia di controllo (mil), i codici chiari e monitor ripristino visualizzare i dati fermo immagine visualizzare dati in tempo reale e definizioni dtc visualizzare i / m condizione di prontezza identifica i codici in attesa recuperare le informazioni del veicolo (VIN) supporti possono (Controller Area Network) e tutti gli altri attuali protocolli OBD-II (ISO9141, kWp 5baud init, kwp int addr, veloce init kwp, pwm J1850, J1850 VPW) altamente affidabile e facile da usare lingua: inglese, spagnolo, francese Caratteristiche AutoSnap cr800 OBDII / EOBD lettore di codice a un mini dispositivo portatile per la diagnosi del veicolo. supporta tutti i protocolli OBDII su tutti OBDII / EOBD veicoli compatibili per permettere proprietario dell'auto o ai tecnici di diagnosticare con precisione problemi al motore. questo lettore di codici ha un design semplice e alla moda, per rendere la vostra esperienza di servizio del veicolo molto più facile! la lista dei pacchetti 1 x cr800 unità principale 1 x istruzioni per l'uso 1 x plastico

AutoSnap CR800 OBDII EOBD mini lecteur de code $37.99 fonctions de petite taille et facilement s'inscrit dans la main fonctionne sur tous les 1996 et plus tard conforme OBDII nous, les véhicules européens et asiatiques détermine facilement la cause de la «lumière Check Engine (mil)" récupérer des génériques (P0, P2, P3, et U0) et spécifiques du fabricant (P1, P3, et U1) éteignez la lumière check engine (mil), des codes clairs et surveille réinitialiser afficher les données Freeze Frame afficher des données dynamiques et définitions dtc Affichage i / m état de préparation identifie les codes attente récupérer les informations du véhicule (NIV) supports peuvent (Controller Area Network) et tous les autres courants protocoles OBD-II (ISO9141, kWc 5baud init, kWc addr int, rapide initialisation kWc, J1850 PWM, J1850 VPW) très fiable et facile à utiliser Langue: Anglais, espagnol, français caractéristiques AutoSnap CR800 OBDII / EOBD lecteur de code un dispositif mini main pour diagnostiquer votre véhicule. Il supporte tous les protocoles OBDII sur tous les véhicules OBDII / EOBD compatible pour permettre aux propriétaires de voiture ou de techniciens de diagnostiquer exactement des problèmes de moteur. ce lecteur de code a un design simple et élégant, pour rendre votre expérience de service des véhicules beaucoup plus facile! liste des paquets 1 x CR800 unité principale 1 x Manuel 1 paquet en plastique x

AutoSnap CR800 OBDII EOBD Mini lector de código de $37.99 funciones pequeña en tamaño y encaja convenientemente en la mano Trabajos sobre el 1996 y más tarde OBDII compatible con nosotros, los vehículos europeos y asiáticos determina fácilmente la causa de la "luz de verificación del motor (MIL)" recuperar genéricos (P0, P2, P3, y U0) y códigos específicos del fabricante (P1, P3, y U1) apagar la luz del motor del cheque (mil), borrar los códigos y los monitores de restablecer ver los datos de Freeze Frame mostrar datos en tiempo real y definiciones dtc pantalla i / m estado de preparación identifica los códigos pendientes recuperar la información del vehículo (VIN) apoyos pueden (Controller Area Network) y todos los otros actuales protocolos OBD-II (ISO9141, KWP 5baud inicio, int addr kwp, rápido inicio kwp, J1850 PWM, J1850 VPW) altamente confiable y fácil de usar Idioma: Inglés, español, francés características AutoSnap CR800 OBDII / EOBD lector de código de un dispositivo mini-portátil para el diagnóstico de su vehículo. Es compatible con todos los protocolos OBDII en todos los vehículos OBDII / EOBD compatible para permitir propietario del vehículo o técnicos para diagnosticar con precisión los problemas de motor. este lector de código tiene un diseño sencillo y elegante, para hacer su experiencia de servicio del vehículo mucho más fácil! la lista de paquetes 1 x CR800 unidad principal 1 x Manual de usuario 1 x paquete de plástico

Car $10 Car

CAR $10 CAR