Duty Air Hammer

Duty Air Hammer

Pneumatic Nail Guns Make Light of Heavy Duty Work

An air nailer or nail gun can drive a nail into wood in a fraction of a second, significantly reducing the time and manpower involved when using a hammer for the same purpose. For large jobs such as installing roofing or hardwood flooring, an air nailer can speed up the workflow several times over while producing solid, consistent results. Nail guns come in a variety of sizes suited for different jobs, with models specifically designed for jobs such as roofing, framing and installing flooring. The project at hand will determine the type of nail gun that should be used.

Air nailers do not use the standard nails that would be used with a hammer. Rather, the nails for a nail gun come in strips or coils and are specific to a certain nail gun. To operate a nail gun, you load a strip or coil of nails into the gun’s magazine, which shoots a new nail each time the trigger is pulled. Always ensure that you are using the correct type of nails for the gun.

Though some nail guns are powered by means such as gas combustion, most are pneumatic, meaning they utilize compressed air to produce the force needed to drive nails. For small tasks like hanging a framed photo on a wall, using a regular hammer and nail is the simplest way to get the job done. For larger jobs, nail guns have a few advantages:

• Work is completed in a fraction of the time.
• Damage to the wood surface that occurs with hammering mistakes is avoided.
• Nails that are held together by adhesive help bond each nail into the wood.
• Consistency is achieved across the entire project.
• Less manual labor is needed to complete large jobs, which can lead to less fatigue and lower costs.

Like other hand and power tools, nail guns can be extremely dangerous when used or handled improperly. Exercising the safety precautions recommended by the manufacturer of your nail gun is critical. While nail guns can make many projects more convenient, they can and do also cause serious injuries. Anyone using these powerful tools should be 100% focused on safety at all times.

About the Author

Maria Polidoro is the owner of Ace Tool Online, a leading dealer and service center for hand and power tools as well as Occidental leather products. Please visit Ace Tool Online to find the right Occidental tool belt, bag belt free system for your needs.

Standard Duty Air Hammer $81.95 ? An economical air hammer with a long piston stroke, this tool is designed for exhaust work, bolt cutting, and front end work. The trigger control and a built in air power regulator give you full control of the speed and power. ? Longer stroke piston ? Alloyed steel barrel and heat-treated piston for longer life. ? Up to 2,000 blows per minute Specifications: Blows per minute: 2,000 Stroke length: 3-1/2'' (89 mm) Weight: 4.1 lbs. (1.86 kg) Length: 9.9 (251) Average air consumption: 3 cfm, @ load 14 cfm Sound (pressure/power): 103.5/116.5 dBA Air inlet: 1/4''Model Number 117.By Ingersoll-Rand.

Ingersoll-Rand Heavy Duty Air Hammer $114.95 Super Duty Air Hammer. Make fast work of body panel crimping and cutting, bushing, driving, shearing and general front end work with this air hammer, a super duty tool that produces up to 3,000 blows per minute.Features:? Professional touch trigger for total control? Long-life tool with a tough one piece alloy barrel? Easy to maintain, with an ''easy out'' throttle valve assembly

IngersollRand IR 121Q Heavy Duty Air Hammer $128.65 Super Duty Air HammerMake fast work of body panel crimping and cutting bushing driving shearing and general front end work with this air hammer a super duty tool that produces up to 3 000 blows per minute. Professional touch trigger for total control. Longlife tool with a tough one piece alloy barrel. Easy to maintain with an easy out throttle valve assembly.

Heavy Duty Air Hammer Kit With Four Chisels $132.95 Kit includes CP7110 air hammer plus a quick change retainer and four chisels packed in a heavy duty carrying case. Product Specifications: ? Shank Opening (in.) .401 ? Bore Diameter in(mm) 3/4 (19) ? Piston Stroke in(mm) 2.63(67) ? Weight (lbs/kg) 3.7(1.7) ? Avg. Air Consumption cfm (l/min) 3.5(106) ? Air Inlet Thread Size NPTF(in.) 1/4 ? Minimum Hose Size(in/mm) 3/8(10) ? Sound dBA Pressure 98.3 ? Vibration m/s(square) 9 ? Blows per minute @ 90 PSI (@6.2 Bar) 3,200 Model Number 7110K By Chicago Pneumatic.

Super Duty Air Hammer Kit With 6 Chisels $137.95 Make fast work of body panel crimping and cutting, bushing, driving, shearing and general front end work with this air hammer, a super duty tool that produces up to 3,000 blows per minute. ? Professional touch trigger for total control. ? Long-life tool with a tough one piece alloy barrel. ? Easy to maintain, with an ?easy out? throttle valve assembly. ? Kit includes: a blowmolded plastic case with a removable lid and 6 chisels. Model Number 121K6. By Ingersoll-Rand.

Ingersoll Rand IRT121 Super Duty Air Hammer $150.91 Features and Benefits: Professional touch trigger for total control Longlife tool with a tough onepiece alloy barrel Easy to maintain with an easy out throttle valve assembly 3 000 blows per minute Weight: 3.5 lbs.Make fast work of body panel crimping and cutting bushing driving shearing and general front end work with this air hammer a super duty tool that produces up to 3 000 blows per minute.

Ingersoll Rand Standard Duty Air Hammer. Each $51.51 Manufacturer: Ingersoll Rand. Each. Features Benefits: Up to 5,000 blows per minute Alloyed steel barrel and heat-treated piston for longer life Built-in power regulator and trigger control This powerful, yet economical high-speed air hammer, is design

Ingersoll Rand 116 Standard Duty Air Hammer $62.03 The economical air hammer for fast cutting action especially for medium exhaust system panel cutting and general repair work. Up to 3500 blows per minute Handles a range of cutting applications Longer life alloyed steel barrel and heattreated piston

Ingersoll Rand IRT116 Standard Duty Air Hammer $74.92 Features and Benefits: Up to 3 500 blows per minute Handles a range of cutting applications Longer life alloyed steel barrel and heattreated pistonThe economical air hammer for fast cutting action especially for medium exhaust system panel cutting and general repair work. Stroke length: 25/8 ; Average air consumption: 3 cfm; sound dBA: 104.4/117.4; air inlet NPTF 1/4 ; minimum hose size: 3/8 .

Extra Heavy Duty Zip Gun? Air Hammer $642.95 ? Most powerful CP Hammer for automotive, truck, off-road equipment use. ? .498'' diameter chisel shank to handle the wxtra power. ? Positive action trigger for precise speed control. ? Applications: front end work, king pin removal, and installation of bulldozer walking beam bushings, removal of truck anchor springs, heavy-duty spring bushings. ? 1800 blows per minute. Specifications: Shank openting: .498'' Weight: 4-? lbs. Bore Dia: ?'' Piston Stroke: 2 11/16'' Avg. Air Consumption: 3 CFM Air Inlet NPTF in.: ? Min. Hose Size: 3/8'' Sound dBA Pressure: 95 Vibration: 1 m/s? Blows per Min. @ 90 PSI: 1800Model Number 717. By Chicago Pneumatic.

Chicago Pneumatic CPT717 Super Duty Air Hammer $928.4 Features and Benefits: Most powerful CP air hammer for automotive truck and off road equipment Positive action trigger for precise control 1 800 blows per minute .498 diameter chisel shank to handle the extra powerApplications: front end work king pin removal removal and installation of bulldozer walking beams removal of truck springs and heavyduty spring bushings. Stroke: 2.69 ; average air consumption: 3.13 cfm; air inlet thread: 1/4 NPTF; minimum hose size: 3/8 ; sound dBA: 95; length: 9.75 ; weight: 4.75 lb.

Ingersoll Rand IRT117 Standard Duty Air Hammer $95.21 Features and Benefits: Longer stroke piston Alloyed steel barrel and heattreated piston for longer life Up to 2 000 blows per minuteAn economical air hammer with a longer piston stroke this tool is designed for exhaust work bolt cutting and frontend work. The trigger control and a builtin power regulator give you full control of the speed and power. Stroke length: 31/2 ; Average air consumption: 3 cfm; sound dBA: 103.5/116.5; air inlet NPTF: 1/4 ; minimum hose size: 3/8 ; weight: 4.1 lbs.; Length: 9.9

117K - Standard Duty Air Hammer $89.48 [383-117K] UPC: 66302300054 6.72 LB

Heavy Duty Zip Gun? Air Hammer $399.95 ? Most controllable CP Hammer available. ? Ideal for complete body shop work. ? Positive action trigger for precise control over speed range. ? Versatile- handles widest range of applications. ? Applications: front end, exhaust, frame, body work, etc. ? 2000 blows per minute. Specifications: Shank openting: .401'' Weight: 3-1/3 lbs. Bore Dia: 9/16'' Piston Stroke:3 1/8'' Avg. Air Consumption: 2 CFM Air Inlet NPTF in.: ? Min. Hose Size: 3/8'' Sound dBA Pressure: 91 Vibration: 7.5 m/s? Blows per Min. @ 90 PSI: 2000Model Number 714. By Chicago Pneumatic.

Ingersoll-Rand Standard Duty Air Hammer $69.56 An economical air hammer with a long piston stroke, this tool is designed for exhaust work, bolt cutting, and front end work. The trigger control and a built in air power regulator give you full control of the speed and power. Longer stroke piston Alloyed steel barrel and heat-treated piston for longer life. Up to 2,000 blows per minute Specifications: Blows per minute: 2,000 Stroke length: 3-1/2 inch (89 mm) Weight: 4. 1 lbs. (1. 86 kg) Length: 9. 9 (251) Average air consumption: 3 cfm, load 14 cfm Sound (pressure/power): 103. 5/116. 5 dBA Air inlet: 1/4 inch

IngersollRand IR 121K6 Super Duty Air Hammer Kit with 6 Chisels $144.76 Make fast work of body panel crimping and cutting bushing driving shearing and general front end work with this air hammer a super duty tool that produces up to 3 000 blows per minute. Professional touch trigger for total control. Longlife tool with a tough one piece alloy barrel. Easy to maintain with an easy out throttle valve assembly. Kit includes: a blowmolded plastic case with a removable lid and 6 chisels.

Ingersoll Rand Standard Duty Air Hammer Kit w/5 Chisels. Each $85.25 Manufacturer: Ingersoll Rand. Each. Features Benefits: The economical air hammer for fast cutting action, especially for medium exhaust system, panel cutting, and general repair work. A protective plastic pouch holds a selection of chisels with .401" sh

Standard Duty Air Hammer With 5 Pc. Chisel Set $82.95 ? An economical air hammer with a long piston stroke, this tool is designed for exhaust work, bolt cutting, and front end work. The trigger control and a built in power regulator give you full control of the speed and power. ? Longer stroke piston ? Alloyed steel barrel an heat treated piston for longer life ? Up to 2,000 blows per minute ? Chisel set includes edging tool, tail pipe cutter, straight cutter, cutting chisel and a punch Air Hammer Specifications: Shank opening: .401'' (10.1 mm) Blows per minute @ 90 psi: 3500 Bore diameter: 11/16'' (17.5 mm) Stroke length: 3-1/2'' (89 mm) Weight: 4.1 lb. (1.86 kg) Length: 9.9'' (251 mm) Average air consumption: 3 cfm, 14 cfm @ load Sound (pressure/power): 103.5/116.5 dBA Air inlet: 1/4''Model Number 117K. By Ingersoll-Rand.

Ingersoll Rand IRT116K Standard Duty Air Hammer Kit with 5 Chisels $104.25 Features and Benefits:The economical air hammer for fast cutting action especially for medium exhaust system panel cutting and general repair work. A protective plastic pouch holds a selection of chisels with .401 shank diameters to match your IngersollRand Air Hammer. Kit includes: Edging tool Tail pipe cutter Straight chisel Cutting chisel Punch Hammer Features: Up to 3 500 blows per minute. Handles a range of cutting applications. Longer life alloyed steel barrel and heattreated piston. Shank opening: .401 / 10.1 MM Blows per minute: 3500 Bore diameter: 11/16 / 17.5 mm Stroke length: 25/8 / 67 mm Weight: 3.4 LB. / 1.54 KG. Length: 7.8 / 198 mm Avg. air consumption: 3 CFM / 85 l/min Load: 15 CFM / 425 l/min Sound DBA (Pressure/Power): 104.4/117.4 Air inlet NPTF: 1/4 Min. hose size: 3/8 / 10mm

Ingersoll Rand IRT117K Standard Duty Air Hammer Kit with 5 Chisels $112.67 Features and Benefits: Longer stroke piston Alloyed steel barrel and heattreated piston for longer life Up to 2 000 blows per minute Kit includes edging tool tail pipe cutter straight chisel cutting chisel and punch packaged in a protective plastic pouch An economical air hammer with a longer piston stroke this tool is designed for exhaust work bolt cutting and frontend work. The trigger control and a builtin power regulator give you full control of the speed and power. Stroke length: 31/2 ; Average air consumption: 3 cfm; sound dBA: 103.5/116.5; air inlet NPTF: 1/4 ; minimum hose size: 3/8 ; weight: 4.1 lbs.; Length: 9.9 .

Ingersoll Rand Super Duty Air Hammer. Each $104.55 Manufacturer: Ingersoll Rand. Each. Features Benefits: Professional touch trigger for total control Long-life tool with a tough one-piece alloy barrel Easy to maintain, with an "easy out" throttle valve assembly 3,000 blows per minute Weight: 3.5 lbs.

Ingersoll Rand 116K Standard Duty Air Hammer With Chisels $85.13 The economical air hammer for fast cutting action especially for medium exhaust work panel cutting and general repair work. Features: Up to 3 500 blows per minute Handles a range of cutting applications Longer life alloyed steel barrel and heattreated piston Chisel set includes edging tool tail pipe cutter straight cutter cutting chisel and a punch

Chicago Pneumatic Heavy Duty Zip Gun Air Hammer $426.87 Most controllable CP Hammer available. Ideal for complete body shop work. Positive action trigger for precise control over speed range. Versatile- handles widest range of applications. Applications: front end, exhaust, frame, body work, etc. 2000 blows per minute. Specifications: Shank openting: 401 inch Weight: 3-1/3 lbs. Bore Dia: 9/16 inch Piston Stroke:3 1/8 inch Avg. Air Consumption: 2 CFM Air Inlet NPTF in. Min. Hose Size: 3/8 inch Sound dBA Pressure: 91 Vibration: 7. 5 m/s Blows per Min. 90 PSI: 2000

Ingersoll-Rand Standard Duty Air Hammer With 5 Pc. Chisel Set $74.99 An economical air hammer with a long piston stroke, this tool is designed for exhaust work, bolt cutting, and front end work. The trigger control and a built in air power regulator give you full control of the speed and power. Longer stroke piston Alloyed steel barrel and heat-treated piston for longer life. Up to 2,000 blows per minute Specifications: Blows per minute: 2,000 Stroke length: 3-1/2 inch (89 mm) Weight: 4. 1 lbs. (1. 86 kg) Length: 9. 9 (251) Average air consumption: 3 cfm, load 14 cfm Sound (pressure/power): 103. 5/116. 5 dBA Air inlet: 1/4 inch Chisel set includes edging tool, tail pipe cutter, straight cutter, cutting chisel and a punch

Chicago Pneumatic cpt7110k Heavy Duty Air Hammer Kit $154.35 Features Benefits: Powerful yet economical for fast cutting action Includes (1) quick change retainer (4) chisels and heavy duty carrying case Vibration isolation system for smoother operation and greater comfort Unique cushioned exhaust deflector on barrel for comfort and control Touch trigger for precision start ups and total controlKit includes (1) quick change retainer (4) chisels and heavy duty carrying case. Ideal for exhaust system work bolt cutting bushing driving shearing and front end work. Shank: .401. Average air consumption: 3.65 cfm.

Mountain Hammer Air w/9 Piece Chisel Set. Each $70.58 Manufacturer: Mountain. Each. Features Benefits: Ideal extra duty hammer kit for various automotive and industrial applications Standard .401 shank size Kit includes: 1-250 mm air hammer 9-Chisels 1-Plastic case (1) FREE Quick Change Retainer! Specs

Chicago Pneumatic Heavy Duty Air Hammer Kit. Each $106.94 Manufacturer: Chicago Pneumatic. Each. Features Benefits: Powerful, yet economical for fast cutting action Includes (1) quick change retainer, (4) chisels, and heavy duty carrying case Vibration isolation system for smoother operation and greater comfo

Florida Pneumatic Manufact. FP660 .498 in. Shank Super Duty Hammer $383.29 45/8 Stroke. Tease Trigger for Control. Heavy Duty Spring Retainer. Designed for Removal of Shackle Pins King Pins and Heavy Duty Bolt and Rivet Cutting. Length: 815/16 (22.7 cm). Avarage CFM: 7. Type: Spring. BPM: 2200. Hose Size I.D: 3/8 . Air Inlet NPT: 1/4 . Tool Type: Air Hammer. Presure: 90 PSI.

Mountain MTN7330 Air Hammer and 9 Piece Chisel Set $101.77 Features and Benefits: Ideal extra duty hammer kit for various automotive and industrial applications Standard .401 shank size Long barrel allows better reach Kit includes: air hammer 9 chisels quick change retainer and bee hive retainer packed in a blow molded caseSpecifications: 35/8 Piston stroke 2 100 blows per minute Length: 10 Weight: 41/2 lbs. Air inlet thread: 1/4 NPT Air hose I.D. size: 3/8 Average air consumption: 4 cfm Noise level: 99.2 dBA 90 PSI

Chicago Pneumatic Heavy Duty Pistol Grip Hammer Kit w/4 Chisels $99.95 Standard .401 round shank Most powerful hammer in its class Longer piston stroke for more power Integral muffler minimizes exhaust sound Fast action and withstands rugged use Ideal tool for heavy duty application   Specifications: Blows/Min.: 2300 Cold rivet capacity: 1/4" Bore: 3/4" Stroke: 3.5" Chisel rivet set shank: .401" Weight: 4.2 lbs. Length: 8.9" Avg. air consumption: 6.25 cfm Actual air consumption: 25 cfm Air inlet thread NPTF: 1/4" Min. hose size: 3/8" Sound DBA pressure: 100 db(A)

Campbell Hausfeld TL050399 Air Hammer with Case $17.99 Air Hammer - TL050399. Carrying Case

IngersollRand IR 116K Standard Duty Air Hammer with 5 Pc Chisel Set $85.13 The economical air hammer for fast cutting action especially for medium exhaust work panel cutting and general repair work. Up to 3 500 blows per minute. Handles a range of cutting applications. Longer life alloyed steel barrel and heattreated piston. Chisel set includes edging tool tail pipe cutter straight cutter cutting chisel and a punchAir Hammer Specifications:Shank opening: .401 (10.1 mm)Blows per minute 90 psi: 3500Bore diameter: 11/16 (17.5 mm)Stroke length: 25/8 (67 mm)Weight: 3.4 lb. (1.54 kg)Length: 7.8 (198 mm)Average air consumption: 3 cfm 15 cfm loadSound (pressure/power): 104.4/117.4 dBAAir inlet: 1/4

K Tool International Air Hammer Chisel. Each $15.8 Manufacturer: K Tool International. Each. 81981 Chisel Air Hammer Customers also search for: Discount Air Hammer Chisel, Buy Air Hammer Chisel, Wholesale Air Hammer Chisel, 769622819819, ToolWeb, Air Hammer Chisels

Factory Reconditioned Campbell Hausfeld TL050300RB Air Hammer with Case $8.99 Air Hammer - TL050399. Carrying Case