Dolly Car

Dolly Car

My Car Has A Dent, How To Fix It?

Dents can be very annoying and few things can spoil the looks of a car that can be as fast as an unexpected dent. It does not matter at all about the cause of dent on the car but having a dented car is definitely not fun and repairing them at the local body shop can indeed be very expensive.

The drivers who got their cars and wallets dented, luckily there are some methods that can be used to remove those predictable dents, scrapes and dings with little out of pocket costs. Although not all dents and dings can be removed by doing it by oneself, it can be worth a try. If successful, it may end up in saving a pretty amount of money.

Repairing dents are a type of ‘do-it-yourself’ style repairs and there are a number of things needed for it.

Following things will be needed for removing and repairing dents:
1.    Dent pulling tool or dent pulling kit, it can be either purchased or borrowed.

2.    Dolly, it is a specially designed tool made for flattening and reshaping metal. It is also important to have a metalworking hammer.
Many kits include everything that is needed to remove and repair small dents easily and quickly. A number of dent repair kits should be purchased from the market. Suction cups and similar implements are used by many of these kits. It has an advantage of eradicating the need of drilling holes in the finishing process for removing a dent.

Once the required tools are bought, following are the steps needed to complete the dent repairs:

-    The center of the dent should be located, than a hole in the dent should be drilled with a drill bit of 1/8”. Alternatively, a hot glue gun can also be used to glue a plastic adapter to the center of the dent. Many dent removal kits contain these plastic adapters and glue guns.

-    The dent pulling tool should be threaded into the newly drilled hole. It can also be attached to the plastic circle that is glued on the dent. When the dent pulling tool will be in place, it has to be pulled to flatten the dent.

-    By using the metalworking hammer, the front of the dent has to be carefully hammered. It has to be done at the same time while the dolly is held firmly against the back side of the dent. During the work, it may be necessary to go underneath the car or open the trunk the car in order to reach the back of the dent.

-    The paint can be grinded down to the bare metal by using a medium grit disk that is mounted on a drill. The area can be extended out at least one inch around the dent itself. Then the entire area can be filled with good quality body filler.

-    The body filler has to be allowed to dry completely, than the area can be carefully sanded with sandpaper which that has been wrapped around a block of wood. When sanding, 36-grit sandpaper can be used in the start and then it can be worked up to a 120-grit sandpaper.

-    A spray primer has to be used to prime the area; one has to be sure to use a primer which is specially designed for automotive use. Six coats of primer should be used; each coat of primer should be allowed to dry completely before applying the next coat.

-    The primer has to be sanded using by using 600-grit wet and dry sandpaper. This will be helpful in removing any scratches. After this, the area should be touched up with a matching automotive paint. In case of the paint is not smooth enough, the area would have to be sanded and painted again until a there is a smooth surface.

About the Author

Also learning how to fix a car dent from other resources is a good option. You will have plenty of options for you to repair it. Also check this resource of how to repair dents on car

.

Dolly $10 Dolly

Ball Bearing Car Dolly Set $191.3 Perfect for shop or home, this car dolly set is capable of holding 1000 pounds per dolly. This car dolly set features swiveling, ball bearing casters to move vehicles in any direction.Perfect for shop or home1000 pound capacity (each dolly) Swivel ball bearing castersMove vehicles forwards, backwards, sideways and diagonallyIncludes one pair of dolliesDimensions: 14.75 inches high x 23.5 inches wide x 4.5 inches deep

Car Dolly (Pair) $458.95 ? Innovative patent-pending design ? clamps directly to pinch welds to prevent slippage during use. ? Independent units eliminate the need to adjust dolly width for different vehicle designs. ? Each unit has an independently adjustable threaded lift saddle with rubber pads to protect the vehicle frame. ? Universal design for use on all vehicle types without additional adapters. ? Provides easy movement of an FWD vehicle after removal of the drive train. ? 5'' polypropylene casters. ?Each unit has a capacity of 1800 lbs. (3600 lbs., pair) with a low height of 9'' and a high of 14''. ? May be used with or without tires on the vehicle.By OTC.

OTC Car Dolly, Pair. Each $475.16 Manufacturer: OTC. Each. Features Benefits: Independent units eliminate the need to adjust dolly width for different vehicle designs Each unit has an independently adjustable threaded lift saddle with rubber pads to protect the vehicle frame Universal

OTC OTC1572 Car Dolly Pair $473.83 Features and Benefits: Independent units eliminate the need to adjust dolly width for different vehicle designs Each unit has an independently adjustable threaded lift saddle with rubber pads to protect the vehicle frame Universal design for use on all vehicle types without additional adapters Provides easy movement of a FWD vehicle after removal of the drive train Each unit has a capacity of 1800 lbs. (3600 lbs. pair) with a low height of 9 and a high of 14 If you have the wheels engine cradle axle or front suspension removed and need to move the vehicle on the shop floor this is a must have Innovative patentpending design clamps directly to pinch welds to prevent slippage during use. Attaches to the underside of the vehicle and allows easy moving of the vehicle that has the wheels or suspension removed. 5in. polypropylene casters. May be used with or without tires on the vehicle.

Dolly Wig $24.99 Dolly Wig

Hello, Dolly $6.49 Hello, Dolly

The Dolly Sisters $6.99 The Dolly Sisters

Hello Dolly $8.99 Hello Dolly

The Cycle Dolly Motorcycle Stand & Mover $299.95 The Cycle Dolly is a one-person user-friendly motorcycle stand/mover. One person can load, move, and unload a motorcycle in a matter of minutes. Most people who own a motorcycle have to share a garage with a car or other items, the Cycle Dolly allows a person to put their cycle in a corner or up against a wall with a push of their hand. The Cycle Dolly has a "V Channel" that is set only ?? off the ground, which makes for easy loading/unloading, and the V Channel holds almost any size tire so the thought of tipping is virtually non-existent. Plus it has an adjustable kickstand plate that will hold anything from a small Honda 150 to a full dress Harley Davidson.   Features: All steel construction Fits almost any motorcycle V-Channel sits 3/4? off ground Walk your bike on with ease 1500 lb. capacity 10 ball bearing poly swivel casters Adjustable kickstand plate Powder coat finish   Video Demonstration:

Dolly Parton $7.99 Dolly Parton - Photo

Hello, Dolly! $12.49 Hello, Dolly! - Masterprint

Dolly Bathing $24.99 Dolly Bathing - Photographic Print

Dolly Tub $24.99 Dolly Tub - Photographic Print

Dolly Dearest $19.99 Dolly Dearest - Poster

Stockings Dolly $24.99 Stockings Dolly - Photographic Print