Cup Socket Wrench

Cup Socket Wrench

How to Change Front Shocks on a Lincoln Town Car!

If your Town Car is starting to hit the bumps a little hard in the front, or if the car is swerving a bit and feeling soft, you may need to replace those Lincoln Town Car front shocks, especially if it has been a while. If you are mechanically inclined you should be able to do this job without any issues.

With the car in park and emergency brake on, set up your tire blocks behind the rear tires. If you have an active air suspension system, turn it off from the switch in the trunk. From under the hood, loosen the nut on the shock rod with your 9/16 hand wrench or deep well socket. Hopefully it turns easily and isn't frozen, which would not be unusual. If this is the case, you will need the "Optional" items mentioned. Try some Rust Buster spray and work with vice grips to hold the shock rod still if it turns with the nut. The worse case scenario should be having to use a nut splitter to split open the nut for removal.

Loosen the lug nuts on the tire; jack the car up high enough to fully remove the tire. Set up a jack stand under the frame of the car on the side you will be working on, but not too near to the bottom of the shock, since you need this area clear. Never rely on a floor jack to carry the load of the car when you will be under it.

Put on your safety glasses to avoid any debris from getting into your eyes while under the car looking up. Set up lighting under the car and then loosen the 2 shock mounting bolts. They should loosen up easily with your 9/16 socket or hand wrench. Once they are completely out, remove the shock from the bottom of the car.

To install the new front shock, slide a metal cup down the shock rod, bowl side facing upwards, and follow it with a rubber bushing, making sure that the metal cup embraces the rubber bushing within it's bowl shape. Now feed the shock up from the bottom of the car and hold the bottom of the shock upward onto the mounting surface as you tighten the 2 bolts.

Going back under the hood, slide the second rubber bushing and metal cup to follow, over the shock rod, making sure the rubber bushing is sitting flush on top of the mounting tower with the metal cup embracing the bushing, and then tighten down the nut until the shock rod begins to turn with the nut.

Put your tire back on, remove your jack and stand, then follow the same steps for removal and installation for the other side.

About the Author

http://www.airsuspension.com/ has been helping people like you find all their air suspension needs at wholesale prices. With our Low Price Guarantee, No-Hassle Return Policy and our team of Certified Air Suspension Technicians to help you anytime you need it, you can feel confident in your air suspension purchase today.

Socket Wrench $68.51 High Quality Content by WIKIPEDIA articles A socket wrench, more commonly referred to as a ratchet, is a type of wrench, or tightening tool, that uses separate, removable sockets to fit many different sizes of fittings and fasteners, most commonly nuts and bolts.The socket wrench includes a ratcheting mechanism that allows the nut to be tightened or loosened with a reciprocating motion, without requiring that the wrench be removed and refitted after each turn. Typically, a small lever behind the socket switches the wrench between tightening and loosening mode. The sockets are attached to the ratchet through a square fitting that contains a spring loaded ball detent mechanism to keep the sockets in place. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 84 Publication Date: 2010/08/24 Language: English Dimensions: 6.00 x 9.02 x 0.20 inches

10 Hexagon Hex Socket Cup Head Bolt Fastener Screws $6.49 Description:Hexagon Hex Socket Cup Head Bolt Fastener Screws.These Hex Socket Screws are made of nickel material.Each screw with 35mm length and 6mm diameter.Hex Cup Head Screws will go deep enough to penetrate the wall stud to give added strength.Counter bored holes in parts allow the screw head to be flush with the surface or recessed.Hex Fastener Screws for use with hex wrench type drivers.(here is not include)Screw size: 35mm(L) X 6mm(diameter)Weight: 75gPackage content:10 x Hex Cup Head Screws

8 in 1 Socket Wrench $19.99 8-in-1 Socket Wrench Is a Time and Space Saver. No need for separate wrenches. Eight sizes—from 3/8" up to 13/16"—are all on this one wrench. Simply pivot into place to use. Designed for tight spaces; position socket to the side for extra leverage. Heavy-duty carbon-steel construction stands up to tough use.

HeliProz Socket Wrench Set (5/5.5/7/8mm) $18.99 HeliProz Socket Wrench Set (5/5.5/7/8mm) Type: Replacement Parts Color: Multi-Color Gender: Unisex Age: Adult

American Standard M9622730070A Wrench 17mm Deep Socket $18.55 Wrench 17 mm Deep Socket. 3/8 Drive. 12 Pt

8-in-1 Socket Wrench $23.99 BikeMaster 8-in-1 Socket Wrench Have eight socket wrenches in your hand at one time! This amazingly innovative tool is the one of the most versatile and compact?on the market today. The rotating heads serve 2 purposes: they allow quick easy selection of different sizes and they allow you get?power onto bolts and nuts in confined spaces. Great idea to save space in a toolbox or to keep in you machines tool kit/saddle bags. Made from durable, drop forged chrome vanadium steel Turn socket tip to access tight spaces Turn socket to side for extra leverage Replaces 8 wrenches and/or sockets 12-point style means you can index the wrench in tight spaces Fits 10, 12, 13, 14, 15, 17, 17, 19 and 21 mm sizes Manufacture's lifetime warranty

18mm Spark Plug Socket Wrench $16.99 Motion Pro 18mm Spark Plug Socket Wrench Specifically designed for Honda XR400's as a trail tool, but fits many models with 18mm plugs The socket is designed to fit into the spark plug cavity Can be used with a 3/8" ratchet, 13/16" wrench or a screwdriver through an 8.5mm hole for removal and installation

Cobra Shower Valve Socket Wrench PST160 $23.67 21/32 x 27/32 socket wrench. Carded. Length: 0.92. Width: 6.31. Height: 3.88

Cobra Shower Valve Socket Wrench PST158 $24.37 Shower valve for socket wrench. 11/32 x 13/32 . Carded. Length: 1.32. Width: 6.31. Height: 3.88

Cobra Shower Valve Socket Wrench Set PST141 $30.79 Shower valves for socket wrench. Carded. Length: 2. Width: 10.06. Height: 7.5

Cobra Shower Valve Socket Wrench PST159 $23.94 Shower valve socket wrench. Removes 2932 and 3132 hex shower faucet stems. Steel. Carded. Length: 1.4. Width: 6.31. Height: 3.88

75 Piece Socket and Wrench Set. $29.99 Ideal mechanics tool set that includes a selection of sockets,wrenches, pliers and screwdirver bits.75 piece socket ; wrench set.Size H7.8, W35, D24.5cm.Weight 3.25kg.Accessories included: 3/8in Dr. ratchet socket driver.3/8in Dr. 3in extension bar.3/8in Dr. 5/8in spark plug socket.3/8in Dr. to in adapter.in dr. 3in extension bar.8x 3/8in Dr. sockets.20x in Dr. sockets.Bit driver.20x 1in hex bits.8x combination wrench.11x hex key wrenches.6in long nose pliers.6in diagonal pliers.Made for carbon steel, TPR, PP, PVC, HDPE.Blow moulded carry case included.Internal manufacturer's 1 year guarantee.

Dib Gs Dib Gs 21 32 in Socket Wrench 453412 $1.56 21/32? socket wrench For removing faucet stems from 2 or 3-handle tub and shower valves 21/32? x 27/32? Brand #: dib GS 453412 UPC: 009326411439 Keywords: socket wrench tub shwr valve

Dib Gs Dib Gs 29 32 in Socket Wrench 453420 $1.66 29/32? socket wrench For removing faucet stems from 2 or 3-handle tub and shower valves 29/32? x 31/32? Brand #: dib GS 453420 UPC: 009326411446 Keywords: socket wrench tub shwr valve

Dib Gs Dib Gs 1-1 32 in Socket Wrench 453439 $1.89 1-1/32? socket wrench For removing faucet stems from 2 or 3-handle tub and shower valves 1-1/32? x 1-3/32? Brand #: dib GS 453439 UPC: 009326411453 Keywords: socket wrench tub shwr valve

Challenge Xtreme 41 Piece Socket and Wrench Set. $24.99 Combined ; ; 3/8 Drive socket setHeat treated carbon steel combination wrenches for strength and durabilitySize: 30×5.5×21cm.41 piece socket ; wrench set.Size H30, W5.5, D21cm.Accessories included: 1 x 50mm bits holder.8 x ; Dr socket - 4, 5, 6, 7, 8, 9, 10, 11mm.8 x 3/8 Dr socket - 12, 13, 14, 15, 16, 17, 18, 19mm.1 x 3/8 Dr 16mm spark plug socket.1 x 3/8 Dr x Dr extension adaptor.1 x 3/8 Dr x 3in socket extension bar.1 x 3/8 Dr ratcheting socket handle.1 x bits driver.1 x 3/8 Dr x Dr extension adaptor.9 x combination wrench 8, 9, 10, 11, 12, 13, 14, 15, 16mm.Carbon steel plated.Blow moulded carry case included.

Assenmacher 36mm Oil Filter Socket Wrench. Each $22.06 Manufacturer: Assenmacher. Each. Features and Benefits: Fits BMW, Ford, VW/Audi and Mini Cooper S (through 2007) 36mm with 6 flats Steel construction Customers also search for: Discount Assenmacher 36mm Oil Filter Socket Wrench, Buy Assenmacher 36mm Oil

Lisle LIS14440 Water Pump Socket/Wrench for GM $39.2 14440Water Pump Socket/Wrench for GM NorthstarFeatures and Benefits: Removes installs the water pump assembly on GM Northstar 4.0L 4.6L engines. Turn the tool with a 1/2 drive ratchet or breaker bar. Angled teeth prevent the tool from slipping.

T-Handle Socket Wrench Set $42.99 Built from chrome vanadium tool steel for corrosoin resistance and durability Includes 8, 10, 12, 13, 14 and 17mm socket sizes, as well as #3 philips Comes with Heavy Duty vinyl carrying case

12V Impact Wrench $32.99 12V Impact Wrench Double socket wrench, carrying case, 2 spare fuses. plug to the car and instantly get enough torque to unlock the tightest lugs

Cobra Prod. Cobra Prod. 1-1 32 in Socket Wrench PST158 $4.46 1-1/32? socket wrench For removing tub and shower valves Wolverine pro-quality plumbing hand tool Bagged 1-1/32? x 1-3/32? Brand #: Cobra Prod. PST158 UPC: 039166046737 Keywords: socket wrench tub shwr valve

Cobra Prod. Cobra Prod. 29 32 in Socket Wrench PST159 $4.18 29/32? socket wrench For removing tub and shower valves Wolverine pro-quality plumbing hand tool Bagged 29/32? x 31/32? Brand #: Cobra Prod. PST159 UPC: 039166046744 Keywords: socket wrench tub shwr valve

Dib Gs Dib Gs Socket Wrench Set 431321 $8.05 Socket wrench set For removing concealed, hard-to-reach faucet stems 10 sockets with leverage bar and wire storage rack Sizes include: 27/32, 31/32, 1-3/32, 1-7/16, and 1-9/32 Brand #: dib GS 431321 UPC: 009326405704 Keywords: stem wrench socket

60505 - Socket Wrench Set $14.14 [0648972] UPC: 037155605057 4L x 5.67W x 8.5H 2.06 LB 0.11 Cubes

Maxpower Precision Parts Spark Plug Socket Wrench 339066 $22.53 Socket wrench. For all .75 and 13/16 hex spark plugs. Made in USA. Carded. Length: 1. Width: 7. Height: 3.5

Campbell Hausfeld TL051799AV 3/8-in Butterfly Impact Wrench $39.99 3/8-in Butterfly Impact Wrench - TL051799AV. 10mm Socket. 15mm Socket. 7/16-in Socket. 1/2-in Socket. 9/16-in Socket. Male Plug. Molded Storage Case

T-type Handle Tap Wrench Reamer Spanner Socket Tool M6-M12 $13.49 Description:T-type Handle Tap Wrench Reamer Spanner Socket Tool M6-M12.Excellent for the professional mechanic!Handle Tap Wrench for use with spanner, reamer, screw top spanner and screw top reamer.M6-M12 handle T-type Reamer Wrench.Spanner Reamer Wrench adjusted and tightened to size by twisting knurled nut.Total size: 4 7/8" x 3 1/2"(L*W)Shank diameter: 8mmWeight: 240.8gPackage content:1 x M6-M12 Reamer Wrench

Great Neck 13/16'' Drive Socket Universal Spark Plug Wrench $4.99 13/16'' Drive Socket Universal Spark Plug Wrench: Neoprene Insert Replaces Spark Plugs Easily! Universal Swivel Joint Works at ALL Angles! Vinyl Grip

Rocker Box Wrench Set $89.95 S&S Cycle Rocker Box Wrench Set Speeds up installation Recommended for professional use Includes four different wrenches that work on all the hard-to-reach rocker box bolts Compatible with 5/8" socket or wrench

Tap and Reamer Wrench Spanner Socket Tool 12.5cm $11.99 Description:Specifications: M8-M14T-handle wrench tool;Excellent for the Professional Mechanic!For use with diestock spanner, diestock reamer, screw top spanner, screw top reamer;The drive is 9cm. The length is about 12.5cm.Weight: 240g

Tap and Reamer Wrench Spanner Socket Tool 9.8cm $9.99 Description:Specifications: M4-M8T-handle wrench tool;Excellent for the Professional Mechanic!For use with diestock spanner, diestock reamer, screw top spanner, screw top reamer;The drive is 7cm. The length is about 9.8cm.Weight: 148g

Sliver Hex 18mm Double End Tubular Angled Socket Wrench $12.99 Description:Chrome vanadium steel material Angled Socket WrenchThis Hex Double End Wrench is hot upset forged, giving a unique grain pattern and upgraded performanceUnique designed open hole on the angle socket end allows access to nuts fitted onto protruding threadsDeep profile grooves and the additional open end to the sockets provide an answer to most problems of accessibility, even with extra-long studsThe angle and through-hole of Hex Tubular Wrench are designed to accomodate long threads or a bar for additional torque without affecting tool strengthHex socket size: 18mmLong shaft length: 190mmShort shaft length: 50mmWeight: 348g

Sliver Hex 19mm Double End Tubular Angled Socket Wrench $14.99 Description:Chrome vanadium steel material Angled Socket WrenchThis Hex Double End Wrench is hot upset forged, giving a unique grain pattern and upgraded performanceUnique designed open hole on the angle socket end allows access to nuts fitted onto protruding threadsDeep profile grooves and the additional open end to the sockets provide an answer to most problems of accessibility, even with extra-long studsThe angle and through-hole of Hex Tubular Wrench are designed to accomodate long threads or a bar for additional torque without affecting tool strengthHex socket size: 19mmLong shaft length: 220mmShort shaft length: 50mmWeight:400g

Double End Tubular Angled Socket Wrench (Hex 6mm) $5.49 Description:Chrome vanadium steel material Angled Socket WrenchThis Hex Double End Wrench is hot upset forged, giving a unique grain pattern and upgraded performanceUnique designed open hole on the angle socket end allows access to nuts fitted onto protruding threadsDeep profile grooves and the additional open end to the sockets provide an answer to most problems of accessibility, even with extra-long studsThe angle and through-hole of Hex Tubular Wrench are designed to accomodate long threads or a bar for additional torque without affecting tool strengthHex socket size: 6mmLong shaft length: 100mmShort shaft length: 20mmWeight: 35g

Double End Tubular Angled Socket Wrench (Hex 9mm) $5.99 Description:Chrome vanadium steel material Angled Socket WrenchThis Hex Double End Wrench is hot upset forged, giving a unique grain pattern and upgraded performanceUnique designed open hole on the angle socket end allows access to nuts fitted onto protruding threadsDeep profile grooves and the additional open end to the sockets provide an answer to most problems of accessibility, even with extra-long studsThe angle and through-hole of Hex Tubular Wrench are designed to accomodate long threads or a bar for additional torque without affecting tool strengthHex socket size: 9mmLong shaft length: 120mmShort shaft length: 30mmWeight: 69g

Hex 10mm to 10mm Double End Tubular Angled Socket Wrench $6.99 Description:Chrome vanadium steel material Angled Socket WrenchThis Hex Double End Wrench is hot upset forged, giving a unique grain pattern and upgraded performanceUnique designed open hole on the angle socket end allows access to nuts fitted onto protruding threadsDeep profile grooves and the additional open end to the sockets provide an answer to most problems of accessibility, even with extra-long studsThe angle and through-hole of Hex Tubular Wrench are designed to accomodate long threads or a bar for additional torque without affecting tool strengthHex socket size: 10mmLong tube length: 125mmShort tube length: 30mmWeight:91g

Double Hex 11mm End Tubular Angled Socket Wrench $7.99 Description:Chrome vanadium steel material Angled Socket WrenchThis Hex Double End Wrench is hot upset forged, giving a unique grain pattern and upgraded performanceUnique designed open hole on the angle socket end allows access to nuts fitted onto protruding threadsDeep profile grooves and the additional open end to the sockets provide an answer to most problems of accessibility, even with extra-long studsThe angle and through-hole of Hex Tubular Wrench are designed to accomodate long threads or a bar for additional torque without affecting tool strengthHex socket size: 11mmLong shaft length: 132mmShort shaft length: 30mmWeight:108g

Double End Tubular Angled Socket Wrench (Hex 12mm) $7.99 Description:Chrome vanadium steel material Angled Socket WrenchThis Hex Double End Wrench is hot upset forged, giving a unique grain pattern and upgraded performanceUnique designed open hole on the angle socket end allows access to nuts fitted onto protruding threadsDeep profile grooves and the additional open end to the sockets provide an answer to most problems of accessibility, even with extra-long studsThe angle and through-hole of Hex Tubular Wrench are designed to accomodate long threads or a bar for additional torque without affecting tool strengthHex socket size: 12mmLong shaft length: 137mmShort shaft length: 35mmWeight: 127g

Double Hex End Tubular Angled Socket Wrench (Hex 14mm to 14mm) $9.99 Description:Chrome vanadium steel material Angled Socket WrenchThis Hex Double End Wrench is hot upset forged, giving a unique grain pattern and upgraded performanceUnique designed open hole on the angle socket end allows access to nuts fitted onto protruding threadsDeep profile grooves and the additional open end to the sockets provide an answer to most problems of accessibility, even with extra-long studsThe angle and through-hole of Hex Tubular Wrench are designed to accomodate long threads or a bar for additional torque without affecting tool strengthHex socket size: 14mmLong shaft length: 150mmShort shaft length: 45mmWeight:192g