Com Cable Interface

Com Cable Interface

Network Cabling Cat5 Vs Cat5e Vs Cat6 - Which Should You Use? by Mark Allen

To explain it in a simple statement, the main distinction comes to the differences in how each delivery medium manages crosstalk, bandwidth and network support.

Cat5 vs Cat5e

Crosstalk – Crosstalk is when the signal from another line causes a harmonic effect or bleed over into another cable. When this happens you will notice that the speed of the network is hindered and it can even shut the signal out completely. Now with Cat5e (Category 5e) there is an improvement over the Cat5 (Category 5) cable and the crosstalk has been significantly lowered.

Bandwidth – Bandwidth is how fast data can be moved across a network. The more bandwidth you have the more quickly you can move data over a network. The rating for Cat5 is at 100Mhz where it is 350Mhz with Cat5e. With the extra speed and higher specs this make Cat5e ideal for network environments that are looking to use Gigabit Ethernet speeds.

For Your Network Cabling Needs In Los Angeles, Go To LACabling.com

Network support – With Cat5 you have the support needed for networks running 10Base-T and 100Base-T, which in layman terms means the network can run at 10mbps or 100mbps (megabits per second). Cat5e is an improved and superior version of Cat5 with added provisions for crosstalk mentioned above. Cat5e is also backwards compatible with Cat5 and can be used in any way that you would use Cat5; yet Cat5e has the ability to support a Gigabit Ethernet and networks that run 1000Mbps (1000Base-T)

The bottom line here is if you plan on putting into operation a Gigabit Ethernet, then you should be sure to use Cat5e. The extra cost involved compared to using Cat5e over Cat5 is well worth it when you consider what is saved in the fact that you are “future proofing” the infrastructure of your network.

For Your Network Cabling Needs In Orange County, Go To OrangeCountyCabling.com

Cat5e vs Cat6

At present there is still some discussion whether new installations of cable should use Cat5e or Cat6. It is often incorrectly assumed that if Cat6 is run then the ability for a Gigabit Ethernet is available. In truth to attain a true Gigabit Ethernet speed, then all components of the network have to be rated for gigabit. Items such as switches, network interface cards and hubs also need to be gigabit rated. That doesn’t mean that there is no difference from Cat5e and Cat6; the difference between these two is in the transmission capabilities. Where it is known that Cat5e can support gigabit speed, Cat6 is actually certified to manage Gigabit Ethernet.

Also, the specifications on Cat6 is better suited for the environment that is usually filled with twisted pairing cables and areas that you generally find with lots of items that cause interference, such as electrical rooms, phone equipment rooms, power lines and lights. For most applications you will find that Cat5e is still acceptable and even preferable to Cat6 because it is less costly and still performs nearly as well. If however you know for sure that all of the components of your network are gigabit rated and the amount of data that will be transmitted will require that you have certified gigabit capabilities, then Cat6 would be the preferred choice.

Mark is the Chief Revenue Officer of SCT Product Sales, Inc.

About the Author

SCT Product Sales, Inc.
A Los Angeles Cabling Contractor

800-203-9841

Email: myoung@sctproducts.com

SCT Product Sales, Inc. is a Los Angeles Cabling Contractor servicing commercial clients throughout the Los Angeles Area. Our services include but are not limited to:

Network Cabling Infrastructure Design, Installation & Certification

Data Cabling, Voice Wiring, Audio/Video Cable

Fiber Optic Cabling

Audio/Video

Audio Distribution, Video Distribution & Conference Table Data Systems

GE Interface Cable for Datex $583.02 GE Interface Cable for Datex

Com (Hardware Interface) $82.85 High Quality Content by WIKIPEDIA articles COM is the original, yet still common, name of the serial port interface on IBM PCcompatible computers. It might not only refer to physical ports, but also to virtual ports, such as ports created by bluetooth or USBtoSerial adapters.The COM ports are interfaced by an integrated circuit such as 16550 UART. This IC has seven internal 8bit registers which hold information and configuration data about which data is to be sent or was received, the baud rate, interrupt configuration and more. In the case of COM1, these registers can be accessed by writing to or reading from the I/O addresses 0x3F8 to 0x3FF. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 116 Publication Date: 2010/12/16 Language: English Dimensions: 6.00 x 9.02 x 0.28 inches

ELM327 OBD 2 Diagnostic Interface VAG-COM Cable $24.99 Dimensions (cm): 7.5 x 7 x 2 Weight (kg): 0.31

USB to RS232 Serial COM Port DB9 Cable DB25 Adapter $12.4 Description: * USB to RS232 Serial COM Port DB9 Cable DB25 Adapter * USB specification revision 1.1 and 2.0 compliant * DB9 to DB25 Adapter support RS232 serial interface (DB25 or DB9) * USB to Com Port Cable support over 1Mbps data transfer rate! * USB to DB9 Cable support remote wake up and power management * Support Windows 98/SE, ME, 2000, XP, Vista * USB Serial port adapter * Low Power Consumption * 1.3meters USB cable length * Weight: 173.3gPackage contents: * 1 x USB to RS232 Cable * 1 x DB9 female to DB25 male Converter * 1 x Driver Disk

USB 2.0 Cable to DB9 pin RS232 COM Port Serial Adapter $10.4 Product Features: * USB Specification Revision 1.1 compliant * USB to RS232 Adapter support the RS232 Serial interface * Over 1Mbps data transfer rate * USB Cable to Com Port Adapter support remote wake-up and power management * System Requirements: Windows 98SE, Me, 2000, XP, Server 2003 And Vista * USB to DB9 Adapter cable length: 1.2meters * Weight: 116.5gPackage content: * 1 x USB Cable to DB9 Serial

Opel Vauxhall Diagnostic Interface USB CAN OBD2 OP-COM $46.99 Primary Function: Opel Vauxhall Diagnostic Interface USB CAN OBD2 OP-COMOn-Board Diagnostic connectors: - PIN6-PIN14: HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps - PIN3-PIN11: MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps - PIN1: SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps - PIN3, PIN7, PIN8, PIN12: Serial Link (ISO9141, KW81, KW82, KWP2000)The included program supports many control units such as: - Automatic Transmission - ABS - Airbag - Engine Cooling module - Instrument Cluster - Electronic Climate Control, And Many others...Note: The above mentioned protocols are merely an example of what the software application includes. The application software features many more control units, that are simply too much to list hereCompatibility: Vehicle must be OBDII compatibleOBDII Plug: 16-pin (Male)USB: 2.0Operating Software Compatibility: Windows 98SE, ME, 2000, XPDimensions: - OBD2: L:105 x W:46 x D:25 - USB Cable: 140cm LongManufacturers Ref: FUWJSYN2SAProduct NotesUser friendly software includedTune your engine with just this cable and your laptopSavings on fuel efficiency mean this cable pays for itselfIncrease the responsiveness of your vehicle at all rev rangesPackage Contents for Model CVFG-A24Opel Vauxhall Diagnostic Interface USB CAN OBD2 OP-COMUSB CableCD with softwareFAQ - Frequently Asked QuestionsHow does the connector select the appropriate pin for communication? Since Opel uses many pin in the On-Board Diagnostic connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communicationThere are a lot of terms I don't understand, like engine control units (ECUs), brake horsepower (BHP), and flashing. What do they all mean? Please check Wikipedia for a detailed explanation of these and other terms that are new to you.

OP-COM USB Diagnostic Cable for OPEL Cars $49.5 - OP-COM is a PC based diagnostic program for OPEL CARS, support CAN BUS- It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B- The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote and key programming- The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples- The diagnostic interface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters- The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps- This is the main reason, why only the USB port based interface is available for CAN-BUS- Compared to the TECH2, which is the dealers tool (with a 32 MB card+CANdi interface), the price of OP-COM is quite affordable- Not to mention the free software updates, which can be downloaded from the internet- With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking, or alarm. You can also reset, and program the following immobiliser related items: ECM, BCM, IPC- You will need the vehicle security code, which can be found on the CAR-PASS. You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B- You can code SAB6, and SAB8 airbags with the softwareSpecificationsDimensions: 4.17 in x 1.89 in x 1.02 inWeight: 4.94 oz

BCI Printer Interface Cable for Autocorr $87.38 BCI Printer Interface Cable for Autocorr

TOPAZ SERIAL CABLE FOR DUAL INTERFACE $24.99 TOPAZ SERIAL CABLE FOR DUAL INTERFACE

Honeywell / Honeywell Interface Cable / 42204064-01E $58.74 Honeywell - Honeywell Interface Cable - 42204064-01E

Canon / CABLE, IFC-400PCU INTERFACE FOR / 9370A001AA $27.32 Canon - CABLE, IFC-400PCU INTERFACE FOR - 9370A001AA

Zebra / Zebra Interface Cable / 105850-006 $22.52 Zebra - Zebra Interface Cable - 105850-006

Canon / CANON INTERFACE CABLE / 9370A001 $27.19 Canon - CANON INTERFACE CABLE - 9370A001

Innovate Motorsports IN3748 LM1 to LMA3 Interface Cable $30.03 LM1 to LMA3 Interface Cable.

Samsung USB Interface Cable $12.99 Samsung SPP-R200 Mobile Printer Copper Data Transfer Cable PIC-R200U Samsung USB USB Interface Cable www.samsungusa.com

USB Interface Cable - USB cable $39.99 Fluke USB Interface Cable - USB cable - mini-USB Type B (M) - 4 pin USB Type A (M)

OBD2 Diagnose Interface OP-COM $33.99 FeaturesLatest Firmware Version V1.39Support 2009 Models Support Saab 9-5 and Saab 9-3 CAN Covers almost all Opel cars from 1992 - 2008, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B OP-COM is a PC based Opel diagnostic program. This interface can read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote and key programming. The program supports many control units:Engine Automatic Transmission ABS Airbag Engine cooling module Instrument Cluster Electronic Climate Control Body Control Unit Many others... Since Opel uses many pin in the On-Board Diagnostic connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)PIN6-PIN14PIN3-PIN11PIN1HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps Fault codes will be shown with all available information:Full fault code text description Full status information (Present, Not present, Intermittent) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window. The program shows you measuring block information on many control modules; you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast.You will get a feedback on the state of the activated output. This will helps you to find the failed components more easily. With OP-COM, you can learn keys to immobilizer, and remote keys to the central door locking, or alarm. You can also reset, and program the following immobilizer related items: ECM, BCM, IPC. You will need the vehicle security code, which can be found on the CAR-PASS. You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B You can code SAB6, and SAB8 airbags with the software. The diagnostic interface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters. The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS. NOTE: The program can only be used with special interface hardware. A simple serial or USB port based standard interfaces (K, KKL, etc) cannot be used!

VAG-COM V409.1 USB Vehicle OBD/OBD2 Cable with Software CD $24.2 *May ships in black color if the blue one is unavailable*- This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol- Can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus- Terminal K = Bus of communication- Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit)- Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW- This K/L Diagnostic interface And cables work on ISO/KWP (Key Word Protocol) launched after 1996only- Supported also ISO9141 protocol- Comes with software CD- Cable length: 130cm- It works with most Volkswagen and Audi models sold worldwide from 1994 onwards. It also workswith most SEAT and Skodas sold outside of N. America. If your VW or Audi has a 16pin OBD II styleData Link Connector then VAG-COM will work

Seiko Interface Cable $4.99 Seiko MPU-L465 Label Printer Copper Data Transfer Cable IFC-U01-1-E Interface Cable Seiko Seiko Instruments USA, Inc USB www.seikoinstruments.com

Canon Cable, Ifc-400PCu Interface. Each $14.02 Manufacturer: Canon. Each. Customers also search for: Discount Cable, Ifc-400PCu Interface, Buy Cable, Ifc-400PCu Interface, Wholesale Cable, Ifc-400PCu Interface, 0013803038361, Computer Cables

obd scan com interface USB $26.67 características funções: leitura de códigos de diagnóstico de anomalia, tanto genéricos e específicos do fabricante, e mostrar o seu significado (mais de 3000 definições genéricas do código na base de dados). códigos de problemas claros e desligar a mil ("Check Engine" light) exibir os dados dos sensores atuais, incluindo: rpm do motor valor calculado da carga temperatura do líquido refrigerante status do sistema de combustível velocidade do veículo trim de curto prazo trim longo prazo pressão coletor de admissão Timing Advance temperatura do ar de admissão taxa de fluxo de ar posição do acelerador absoluta oxigênio tensões de sensores / associados curto prazo combustível acabamentos status do sistema de combustível pressão de combustível características obd de verificação é a ferramenta de verificação recém-desenvolvido sem fio. ele suporta todos os protocolos OBD-II SAE J1850 PWM (41.6kbaud) SAE J1850 VPW (10.4kbaud) ISO9141-2 (5 baud init, 10.4kbaud) iso14230-4 kWp (5 baud init, 10,4 kbaud) iso14230-4 kWp (fast init, 10.4 kbaud) iso15765-4 pode (11bit id, 500 kBaud) iso15765-4 pode (29bit id, 500 kBaud) iso15765-4 pode (11bit id, 250 kbaud) iso15765-4 pode (29bit id, 250 kbaud) a.sae J1939 pode (29bit id, 250 kbaud) b.user1 pode (11 ID bit, 125 kbaud) c.user2 lata (11 ID bit, 50 kbaud) funciona com todos os veículos compatíveis com OBD-II sem fio (Bluetooth) 5 ~ 10 metros software incluído para palm, pda e celular software incluído para Windows PC software incluído para Windows Smartphone

Quantum SAS Interface Cable $101.99 1 x SFF-8088 1 x SFF-8470 1-00828-01 39.60" Copper Data Transfer Cable Quantum Quantum Corporation SAS SAS Interface Cable SFF-8088 SFF-8470 www.quantum.com

Dual iPlug Interface Cable $12.99 1 x Mini-phone Female 2 x RCA Male 39.37" Direct audio playback from marine sound system Controls are supported from digital music player, not receiver Includes interface cable and audio cable Marine sound system The Dual iPlug Interface Cable allows you to listen to any portable music, video or multimedia player equipped with a 3.5mm headphone jack through any head unit with standard RCA inputs. Data Transfer Cable Dual IP35WG Mini-phone Namsung Corporation RCA iPlug Interface Cable www.dualav.com

Easy Weigh Interface Cable for POS Scales $25 Easy Weigh Interface Cable for POS Scales

Respironics RS-232 Interface Cable for Stardust II $479.99 Respironics RS-232 Interface Cable for Stardust II

BCI Printer Interface Cable for Capnocheck Plus/Sleep $78.06 BCI Printer Interface Cable for Capnocheck Plus/Sleep

BCI Interface Cable (Oximetry Software - 1621) $214.8 BCI Interface Cable (Oximetry Software - 1621)

Jensen / JENSEN iPod Interface Cable / JIPDCBL12 $29.51 Jensen - JENSEN iPod Interface Cable - JIPDCBL12

Zebra / Zebra USB Interface Cable / 300283-001 $33.16 Zebra - Zebra USB Interface Cable - 300283-001

Seiko / Seiko Interface Cable / IFC-U01-1-E $18.62 Seiko - Seiko Interface Cable - IFC-U01-1-E

Alesis MicLink USB Audio Interface Cable 889406779105 $41.65 Alesis MicLink USB Audio Interface Cable 889406779105

Alesis LineLink Dual 1/4 to USB Cable Interface $44.59 Alesis LineLink Dual 1/4" to USB Cable Interface

Nady UIC-10 USB Interface Cable - 10' $39 Nady UIC-10 USB Interface Cable - 10'

Alesis MicLink USB Audio Interface Cable $49 Alesis MicLink USB Audio Interface Cable

Nady UIC-80PP Audio Interface 2X2 Cable $49 Nady UIC-80PP Audio Interface 2X2 Cable

Nady Uic-80Pp Audio Interface 2X2 Cable $49 Nady UIC-80PP Audio Interface 2X2 Cable