Clutch Tools

Clutch Tools

Toyota Corolla Clutch

Performance Toyota Corolla Clutch For Higher Torque and Power

Performance Toyota corolla clutch is used to add extra horsepower to a Toyota Corolla. If you want to enhance the holding power of the factory transmission and clutch set up, a performance clutch assembly is the right option because only this can handle the extra torque. Performance clutch kits include a pressure plate, throw-out bearing, pilot bearing, clutch alignment and the clutch itself.

Toyota Corolla Clutch: Important Parts

A good performance Toyota Corolla clutch offers substantially increased power with a small increase in pedal pressure. The manufacturers of performance clutches design heavy duty clutches with a very high clamp load. They re-engineer the clutch kit for high performance street and racing use.

High Torque Clutch Cover: Performance clutch kits are designed to achieve an around 30% increase in clamp load as compared to factory-fitted kits. These clutch covers are made of ductile materials so that one can achieve high burst strength at all temperature ranges.

Aluminum Flywheels: A performance clutch is an excellent upgrade for a Toyota Corolla. The steel flywheels that come with the Toyota Corolla are prone to shattering under very aggressive driving conditions. Performance clutch kits come with aluminum flywheels that are good for road racers who look for quicker revs. These flywheels also complement turbocharged cars that experience lags.

High Torque Organic Clutch Plate: High-torque organic clutch plates have very high heat resistant properties. These plates are ideal for tracks and street use, since they are made of high-strength fibers and heavy duty springs.

Clutch Release Bearing: The clutch release bearing in a performance Toyota Corolla clutch kit is made to handle high torque and offers quiet and reliable performance.

Fitting Toyota Corolla Clutch - Opt For A Professional

It is better to enlist the services of a professional to get the clutch kit installed because one has to remove the existing transmission to install the new clutch kit. Once the transmission is removed, one has to remove the stock setup and install the new performance kit, using a clutch alignment tool. One also needs to ensure that the flywheel is clean in order to prevent slipping during gear shifts.

About the Author

Modacar offers a wide range of performance kits, including Toyota Corolla Clutch kits, and other aftermarket components. The company has more than a decade of experience in providing performance clutch systems for racing and street use. www.modacar.com is a one-stop shop for car owners to increase the speed, power and torque of their vehicles.

KD Tools 3 Piece Fan Clutch Kit. Each $54.01 Manufacturer: KD Tools. Each. 3472 Fan Clutch Kit 3 Piece Customers also search for: Discount 3 Piece Fan Clutch Kit, Buy 3 Piece Fan Clutch Kit, Wholesale 3 Piece Fan Clutch Kit, 082171034725, ToolWeb, Engine Belt Tools

Clutch $119 Clutch

KD Tools 2 Piece 6.0L Powerstroke Fan Clutch Kit. Each $43.49 Manufacturer: KD Tools. Each. Features Benefits: Designed for Fan Clutch removal on 2003 and above Ford 6.0L Powerstroke engines Unique fan clutch wrench grips and securely holds the pulley housing Fan clutch holding tool loosens and removes oval or ro

OTC OTC7073A 1.75Truck Clutch Alignment Tools $77.34 Designed for use on heavy duty single twoplate push/pull manual and selfadjust clutches. Shaft is constructed of lightweight fiberglassreinforced nylon that won t hang up in clutch disc splines. Rugged and will easily support the weight of heavy pressure plates. Truck Clutch Alignment Shaft 13/4 O.D. 11/4 Pilot.

KD Tools Ford Clutch Tool Hydraulic Quick Disconnect Tool. Each $9.2 Manufacturer: KD Tools. Each. Features Benefits: Used to release fingers that hold clutch line to the clutch sleeve cylinders Works on hard-to-reach couplings found on Ford light-duty trucks, Bronco II, Ranger, Explorer, 1989 to current Thunderbird and

KD Tools Automatic Transmission Clutch Spring Compressor. Each $117.93 Manufacturer: KD Tools. Each. Features Benefits: Permits easy removal and installation of snap rings Tool compresses automatic-transmission clutch springs on some GM, Ford, Toyota and other transmissions No need to remove center shaft and clutch assemb

K-D Tools Fan Clutch Wrench Set $56.29 Includes the Universal Pulley Holder part 3471 plus fan clutch wrenches 3422 and 3136-76. Used to remove and replace thermostatic fan assemblies while eliminating the need for various size holding wrenches. Applications include: Ford trucks w/2. 8L, 2. 9L, 3. 0L, 4. 0L, 4. 9L and 5. 0L engines. Dodge trucks w/3. 9L, 5. 2L, 5. 9L, 8. 0L V10 engines. GM trucks w/4. 3L, 5. 0L and 5. 7L engines. Jeeps w/5. 2L engines. Includes: Universal Pulley Holder; Wrench (40mm); Wrench (36mm)

KD Tools Clutch Aligning Tool Set. Each $28.46 Manufacturer: KD Tools. Each. Features Benefits: Aligns single disc clutches on American and imported cars, light trucks, and tractors Plate aligning cone has 1-1/8" maximum diameter taper Includes Zinc adapters for Import: 0.472" and 0.500"; 0.622" an

KD Tools Fan Clutch Service Kit. Each $85.09 Manufacturer: KD Tools. Each. Features Benefits: This versatile kit covers most vehicles with bolt or pulleys and also newer Chrysler engines with press on pulleys requiring special pins to hold housing Features the patented 35W universal pulley holder

Slipper Clutch Kit $1092.99 Hinson Racing Slipper Clutch Kit MotoGP-developed slipper clutch technology from Hinson Racing Fully adjustable slip range Better braking control Less kickback under braking Easier to slide into corners Improved clutch performance and life Precision machined from billet T-6 aircraft-quality aluminum to aerospace tolerances Akadized™ for five times the wear resistance over stock Allows clutch assembly to spin more true, creating less heat when clutch is disengaged Simple installation; no special tools needed

KD Tools KD 2398 Automatic Transmission Clutch Spring Compressor $148.22 Tool compresses automatictransmission clutch springs on some GM Ford Toyota and other transmissions. It permits easy removal and installation of snap rings. Job can be completed without removing center shaft and clutch assembly from transmission housing. To use force legs in and catch jaws inside transmission drum groove. Loosen wing nuts and adjust pushers. Tighten screw until lock ring is free to be removed.

Deluxe Fan Clutch Wrench Set - 10 Pc. $123.95 ? Allows you to hold the fan clutch with the clutch holder tool. while using the special wrench to turn the fan clutch nut. ? Square drive allows use with a breaker bar for extra torque. ? Complete service kit includes: 2-1/4'' & 3-1/4'' fan pulley holding tools; 2-3/8'' fan clutch bolt holding tool; 2-1/8'' & 3'' fan clutch pulley holding tools; 2-13/16'' fan hub wrench; 1-7/16'' fan clutch nut wrench, 1-7/16'' & 1-9/16'' fan clutch wrench; 1-7/8'' left hand clutch nut wrench. Comes in molded carrying case.By Astro Pneumatic.

KD Hand Tools 41580 Fan Clutch Wrench Set $108.95 Removes and installs the fan clutch on many models when repairing or replacing water pump timing chain or the fan clutch. Universal Pulley Holder Designed to trap and hold bolton pulleys by the mounting bolts. Pin set small (5 x 8 mm) Pin set large (cam pins 6 x 10mm 7.5 x 18mm) 22mm (7/8 ) Ford Ranger 3.0L 36mm (17/16 ) Ranger Explorer Bronco 40mm (19/16 ) F series and E vans 47mm (17/8 ) F series and E vans 50mm (2 )

Robinair ROB10861 Clutch Plate Remover / Installer $39.64 These compact tools are used both to remove the clutch for access to the shaft seal. To reinstall it by simply inverting the nut and main bearing.

KD Tools Ford Fan Clutch Wrench Set. Each $63.65 Manufacturer: KD Tools. Each. Features Benefits: Use with 1/2" square drive tools and a torque wrench Remove and replace fan assembly on Ford 6.9L and 7.3L engines Wrench openings- Long: 48mm Wrench openings- Short: 83mm This set is used to remove and

Dewalt Tools 1/2 (13mm) VSR Stud & Joist Drill with Clutch and Bind-Up Control. Each $475.84 Manufacturer: Dewalt Tools. Each. Bind-Up Control stall sensing technology provides increased control of reactionary torque Mechanical clutch in low speed delivers increased gear protection 100% ball-bearing construction provides durability and longer too

KD Tools KD 3472 Fan Clutch Wrench Set $66.95 Includes the Universal Pulley Holder part #3471 plus fan clutch wrenches #3422 and 313676. Used to remove and replace thermostatic fan assemblies while eliminating the need for various size holding wrenches. Applications include: Ford trucks w/2.8L 2.9L 3.0L 4.0L 4.9L and 5.0L engines. Dodge trucks w/3.9L 5.2L 5.9L 8.0L V10 engines. GM trucks w/4.3L 5.0L and 5.7L engines. Jeeps w/5.2L engines. Includes: Universal Pulley Holder; Wrench (40mm); Wrench (36mm)

2107 16t Clutch bell $4.23 Clutch

86040 clutch chip unit $5.64 clutch

OTC Fan Clutch Tool 32mm. Each $34.6 Manufacturer: OTC. Each. Lifetime warranty does not cover abuse Customers also search for: Discount Fan Clutch Tool 32mm, Buy Fan Clutch Tool 32mm, Wholesale Fan Clutch Tool 32mm, 731413459184, 6985-5, Cooling System Tools

KD Tools Ford Fan Clutch Wrench 36 mm Long. Each $22.76 Manufacturer: KD Tools. Each. Features Benefits: Replacement Long Wrench 36mm Refer to Ford factory service manual for torque specifications and thread direction This is the replacement Long wrench for the 3136. Which is used to remove and replace the

Gm A6/R4 A/C Clutch Plate Remover/Installer $34.95 These compact tools are used both to remove the clutch for access to the shaft seal and to re-install it by simply inverting the nut and main bearing.By Robinair.

Milwaukee® Electric Tools - Sawzalls $206.5 Reciprocating saw with more powerful motor. Milwaukee® cutting tools feature heavy-duty steel Quik-Lok blade clamp system. Controlled with trigger speed for best operator control and comes with gear protection clutch. Contains no hazardous materials. Power tools equipped with legendary sawzall durability comes with new, more powerful motor . Includes adjustable pivot shoe and features heavy-duty steel Quik-Lok blade clamp system.

KD Tools Ford 4.9 Liter Fan Clutch Wrench. Each $21.81 Manufacturer: KD Tools. Each. Features Benefits: Wrench removes thermostatic fan assembly on 1993 to current 4.9-L Ford engines Wrench opening: 40mm Makes the removal of the thermostatic fan assembly on 1993 to current 4.9-L Ford engines quick and easy

Schley 36 mm Cummins Fan Clutch Wrench. Each $44.05 Manufacturer: Schley Products, Inc. Each. Customers also search for: Discount 36 mm Cummins Fan Clutch Wrench, Buy 36 mm Cummins Fan Clutch Wrench, Wholesale 36 mm Cummins Fan Clutch Wrench, ToolWeb, Clutch and Hub Tools

Milwaukee® Electric Tools - Orbital Super Sawzalls $290.1 Heavy-duty cutting tools. Milwaukee® power tools include an exclusive-gear-protecting clutch Features heavy-duty quick-change blade clamp Does not contain hazardous materials

2 Pc. 6.0-L Fan Clutch Pulley Holder $51.95 This kits is designed for fan clutch removal on newer Ford applications equipped with the 6.0 liter Powerstroke diesel engine available since 2003. The unique design and components of the tools included in this kit give the user the ability to grip and securely hold the pulley housing while applying torque to the 47mm clutch nut for loosening and removal. ? Designed for Fan Clutch removal on 2003 and above Ford 6.0L Powerstroke engines. ? Unique Fan Clutch Wrench grips and securely holds the pulley housing. ? Fan Clutch Holding Tool to loosen and remove oval or round hole holding nut.By K-D Tools.

Astro Pneumatic Deluxe Fan Clutch Wrench Set - 10 Pc. $112.84 Allows you to hold the fan clutch with the clutch holder tool. While using the special wrench to turn the fan clutch nut. Square drive allows use with a breaker bar for extra torque. Complete service kit includes: 2-1/4 inch & 3-1/4 inch fan pulley holding tools; 2-3/8 inch fan clutch bolt holding tool; 2-1/8 inch & 3 inch fan clutch pulley holding tools; 2-13/16 inch fan hub wrench; 1-7/16 inch fan clutch nut wrench, 1-7/16 inch & 1-9/16 inch fan clutch wrench; 1-7/8 inch left hand clutch nut wrench. Comes in molded carrying case.

Astro 7895 10 Piece Deluxe Fan Clutch Wrench Set $142.71 Allows you to hold the fan clutch with the clutch holder tool. While using the special wrench to turn the fan clutch nut. Square drive allows use with a breaker bar for extra torque. Complete service kit includes: 21/4 31/4 fan pulley holding tools; 23/8 fan clutch bolt holding tool; 21/8 3 fan clutch pulley holding tools; 213/16 fan hub wrench; 17/16 fan clutch nut wrench 17/16 19/16 fan clutch wrench; 17/8 left hand clutch nut wrench. Comes in molded carrying case.

Fan Clutch Wrench Set $65.95 Includes the Universal Pulley Holder part #3471 plus fan clutch wrenches #3422 and 3136-76. Used to remove and replace thermostatic fan assemblies while eliminating the need for various size holding wrenches. Applications include: Ford trucks w/2.8L, 2.9L, 3.0L, 4.0L, 4.9L and 5.0L engines. Dodge trucks w/3.9L, 5.2L, 5.9L, 8.0L V10 engines. GM trucks w/4.3L, 5.0L and 5.7L engines. Jeeps w/5.2L engines. Includes: Universal Pulley Holder; Wrench (40mm); Wrench (36mm)By K-D Tools.

Jalda Deniz Clutch Clutch $235.39 Jalda Deniz Clutch Clutch

Mastercool Clutch Plate Remover. Each $12.24 Manufacturer: Mastercool. Each. Features Benefits: Metric thread Individually sold clutch plate remover that is a part of the 91270 Special GM DA6 Seal Set For carbon type seals used with tools from the 91269 Seal Set Mastercool manufactures the most c

Tools $6 Tools - ABK

No Tools $2.49 No Tools Vinyl Sticker No Tools Loaned

50029 Clutch Bell Bush for V1 or V2 only $4.87 Clutch

50029N Clutch Bell Bush for V3 only $29.89 Clutch

OTC OTC7480 Truck Clutch Alignment Shaft $71.2 These truck clutch tools are available in the three most popular sizes: 1 1/2 1 3/4 and 2 0.D. 10spline shafts. Each tool is constructed of a lightweight fiberglass reinforced nylon body that wont hang up in the clutch disc splines. Each tool is designed to provide a perfect fit to the spline of the clutch disc. Easily supports heavy pressure plates.