Clamp System

Clamp System

Camlok Clamps Suitable For All Your Rail Needs

Camlok lifting clamps are the most suited clamps to use for all UK rail track currently in use. The clamps are suitable for lifting beams, rail tracks and other sections of track. The range of Camlok clamps have been designed to lift in a secure and safe way. Currently Camlok offer a wide range of clamps suitable for the rail industry.

CR – Single Rail Clamp

This clamp is designed with a narrow profile which enables safe attachment to individual rail that is stacked side by side with other rails.  Once the clamp is positioned it is locked onto the rail-head by using a lever operated spring mechanism.  If the rail track is of a longer length then these clamps should be suspended from a lifting beam to operate at full potential.

RP – Rail Pulling Clamp

A rail pulling clamp fits almost most rail sections.  This clamp is designed to be used when positioning rail sections. It has a screw shaft mechanism which is used to attach the clamp to the web of the rail. At the end of the screw shaft are hardened steel circular teeth and the opposing pad also has hardened circular steel teeth for a strong grip.

The shaft is supported on a bearing that allows a high degree of angular movement. When a lateral load is applied to the clamp, the pad rotates in a cam action and securely grips the rail web securely and safely.

MR – Multi Rail Clamp

These clamps are specifically designed to facilitate fast bulk handling of specific sections of rail track. The rails are securely locked onto the clamp by swivelling feet that are located under the rail head and top clamp body that rotates in a cam action pressing a hard rubber lined horizontal beam onto the top of the rail-head. The contact beam is rubber lined so no marking or damage will occur to the rail-head.

For rail lengths up to 20 metres it is recommended that two clamps are used towards the centre of the rails – 50 to 60% length. I the rails are over 20 metres then three clamps should be used at centre distance between the outer clamps of 65 to 75% of the rail length. If you are using the clamps to lift rails then they should be stacked with the bottom flange toes touching and be of the same rail section side.

Whatever your clamps requirement be it Camlok CR Clamps, Drag Clamps or Auto Rail Clamps, your rail lifting equipment specialists can offer the most suitable product.

About the Author

Freelance copy writer

Arbil Rail

U Clamp Mount System $38.99 Cycra U Clamp Mount System Keep your handguard fresh and tight with a new U Clamp system CNC-Machined from billet aluminum for best fit and strength

Pearl Pipe Clamp, Tilting System $24 Icon pipe clamp with tilting clamp system and adjustable jaw. Fits both Icon rack systems and Adams field percussion frames.

Cargo Clamp Cargo Management System $75 Cargo Clamp Cargo Accessories in stock now! Read Cargo Clamp Cargo Management System customer reviews. AutoAccessoriesGarage.com has the best selection of Cargo Clamp Truck Bed Accessories at the lowest prices around. Cargo Clamp Cargo Management System are chosen by auto enthusiasts everywhere to personalize their vehicles. Cargo Clamp Cargo Management System available now at AutoAccessoriesGarage.

Truxedo Tonneau Mate; Clamp $38.99 Tonneau Mate; Clamp; For Use w/Track System;

overdoor pulley system with door clamp $26.18 overdoor pulley system with door clamp Pulley exercisers increase shoulder range-of-motion. Position bracket (double pulley), clamp (single pulley) and strap with knob (single pulley) in the door jamb. Product photo may not exactly match the product offered for sale. Please refer to the product description.

Cargo Clamp Cargo Management System CargoClampKit $75 Cargo Clamp Cargo Accessories in stock now! Read Cargo Clamp Cargo Management System CargoClampKit customer reviews. AutoAccessoriesGarage.com has the best selection of Cargo Clamp Truck Bed Accessories at the lowest prices around. Cargo Clamp Cargo Management System CargoClampKit are chosen by auto enthusiasts everywhere to personalize their vehicles. Cargo Clamp Cargo Management System available now at AutoAccessoriesGarage.

Pearl PCX200 Pipe Clamp $34.99 The Pearl PCX200 pipe clamp includes a tilting system with adjustable jaw.

Pearl Pcx200 Pipe Clamp $34.99 The Pearl PCX200 pipe clamp includes a tilting system with adjustable jaw.

LED Clamp System by Rigid Industries $71.99 Fits E-Series LED lights;1.625" tube mount system;Adjustable

American DJ Dura Clamp $2.99 This dura clamp is designed for use with the Dura Truss system for a proper fit and holds light fixtures up to 20 lbs. for reliable support.

Triple Clamp Upper Kit $260.99 Pro Taper Triple Clamp Upper Kit One clamp for all applications Cold-forged, then Machined from 6061 T6 aluminum; Much stronger than billet Cold-Forged bar clamps with one piece accu-trax top clamp to resist “twisting” 5 front to back bar clamp positions Completely re-designed rubber mount system includes 3 durometers of cushions (soft, medium, firm) and aluminum rigid mount cushion replacements True bolt on. No special tools or presses required Click Here For Triple Clamp Complete Kit **Closeouts are limited to stock on hand**

Sway Bar Clamp System by Fabtech for Jeep $53.99 Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited;Designed to fit a 1-3/16” sway bar;Easy installation JEEP WRANGLER (97-06LJ) WRANGLER (97-06TJ) 65TH ANNIVERSARY EDITION RUBICON SAHARA SE SPORT UNLIMITED UNLIMITED RUBICON X 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2.4L Power-Tech (148) 2.5L (150) 4L Power Tech (242) GAS Sway Bar Clamp System by Fabtech for Jeep

Tama MC62 Multi-Clamp $24.99 The Tama MC62 double multiclamp connects 2 percussion hardware tubes with diameters from 5/8" to 1-1/8" (15.9mm to 28.6mm). Both sides of the multi-clamp include FastClasp Easy Set-Up System.

Tama Mc62 Multi-Clamp $24.99 The Tama MC62 double multiclamp connects 2 percussion hardware tubes with diameters from 5/8" to 1-1/8" (15.9mm to 28.6mm). Both sides of the multi-clamp include FastClasp Easy Set-Up System.

1-1/2 Inch Stainless Steel Clamp $1.99 1.5 Inch Stainless Steel ClampSPP carries everything you need to install your Pool Filter System! Use this stainless steel Clamp to attach the filter hoses to a new PoolFilter System, or to replace a worn Clamp on your existing system. Shop all ourFilter Accessories to find just what youre looking for.

Triple Clamp Complete Kit $449.99 Pro Taper Triple Clamp Complete Kit One clamp for all applications Cold-forged, then Machined from 6061 T6 aluminum; Much stronger than billet Cold-Forged bar clamps with one piece accu-trax top clamp to resist “twisting” 5 front to back bar clamp positions Completely re-designed rubber mount system includes 3 durometers of cushions (soft, medium, firm) and aluminum rigid mount cushion replacements Complete kits feature the upper kit along with a fully assembled lower tripleclamp that includes stem, lower bearing and seal, and stem hardware True bolt on. No special tools or presses required Complete kit also includes a trick, two piece number plate mounted brake line guide *Note: Bar Mounts Will only fit 1-1/8" Oversized handlebars. Click Here For Triple Clamp Upper Kit Click Here For Pit Bike Triple Clamp Complete Kit

Tama MC61 Multi Clamp $15.99 The Tama MC61 Multi Clamps connects any stand with a diameter of 19.1mm to 28.6mm with any attachment having a diameter of 19.1mm. The Tama FastClamp Easy Set-Up System lets you snap the multi clamp on quickly. Tama quality hardware goes on fast and lasts forever.FastClamp SystemTama quality construction

Tama Mc61 Multi Clamp $15.99 The Tama MC61 Multi Clamps connects any stand with a diameter of 19.1mm to 28.6mm with any attachment having a diameter of 19.1mm. The Tama FastClamp Easy Set-Up System lets you snap the multi clamp on quickly. Tama quality hardware goes on fast and lasts forever.FastClamp SystemTama quality construction

1994-1996 Buick Roadmaster Exhaust Clamp Dynomax Buick Exhaust Clamp 35337 $3.69 dynomax heavy duty u-bolt clamp steel natural finish 0.375 in. thick made of tough and durable steel with 11-gauge saddle for a better look designed to precisely hang and properly secure your performance system fits 2.5 in. pipe auto parts warehouse has extensive dynomax exhaust clamp catalogs.we are now offering free shipping on all dynomax exhaust clamp orders over $50.00. our secure dynomax exhaust clamp catalog is available every hour of everyday. shop with confidence for all your dynomax exhaust clamp needs. dynomax exhaust clamp are in stock and available today. save upto 60% off dealer price on your next dynomax exhaust clamp purchase. our online catalog contains a wide selection of the oem and aftermarket parts you need at unbeatable prices

1999-2005 Cadillac Escalade Exhaust Clamp Dynomax Cadillac Exhaust Clamp 35794 $3.94 dynomax heavy duty u-bolt clamp steel natural finish 0.375 in. thick made of tough and durable steel with 11-gauge saddle for a better look designed to precisely hang and properly secure your performance system fits 3 in. pipe auto parts warehouse has extensive dynomax exhaust clamp catalogs.we are now offering free shipping on all dynomax exhaust clamp orders over $50.00. our secure dynomax exhaust clamp catalog is available every hour of everyday. shop with confidence for all your dynomax exhaust clamp needs. dynomax exhaust clamp are in stock and available today. save upto 60% off dealer price on your next dynomax exhaust clamp purchase. our online catalog contains a wide selection of the oem and aftermarket parts you need at unbeatable prices

1994-2001 Acura Integra Exhaust Clamp Dynomax Acura Exhaust Clamp 35336 $3.41 dynomax heavy duty u-bolt clamp steel natural finish 0.375 in. thick made of tough and durable steel with 11-gauge saddle for a better look designed to precisely hang and properly secure your performance system fits 2.25 in. pipe auto parts warehouse has extensive dynomax exhaust clamp catalogs.we are now offering free shipping on all dynomax exhaust clamp orders over $50.00. our secure dynomax exhaust clamp catalog is available every hour of everyday. shop with confidence for all your dynomax exhaust clamp needs. dynomax exhaust clamp are in stock and available today. save upto 60% off dealer price on your next dynomax exhaust clamp purchase. our online catalog contains a wide selection of the oem and aftermarket parts you need at unbeatable prices