Clamp Pliers Remover

Clamp Pliers Remover

15 tips to revive your drill battery

Although your cordless drill battery no longer holds a charge, there may still be some life left in it. An 18-volt cordless drill battery pack can be revived using a process similar to jump-starting a dead car battery. This process should only be performed on Nickel Cadmium (Nicad) and Nickel Metal Hydride (NiMH) battery packs.

Things You'll Need:

<!-- google_ad_section_end() --> <!-- google_ad_section_start() -->

• 12-volt power source
• 1 link black 14-gauge wire
• 1 link red 14-gauge wire
• Small red and black alligator clamps
• Safety glasses
• Insulated gloves
• Long sleeve shirt
• Needle-nose pliers
• Small container
• Volt meter

1. Test your dead cordless drill battery pack using the volt meter to verify which lead in your battery case is negative and which is positive. Clearly mark which point is positive and which is negative on the battery case to ease the difficulty of later reassembly.

2. Use a small screwdriver to open the drill battery case. Watch out for the spring inside of the case because it tends to pop out and can easily get lost. Save the screws and spring by placing them in a small container.

3. Lift off the top of the cordless drill battery case to expose the inner battery cells. These cells will look like a grouping of C batteries that are joined together in one link.
4. Remove the battery cells from within the bottom of the drill casing. These will come out as one unit as they are banded or shrink-wrapped together.
5. Locate the point where the wires run from the terminal piece down through the silver cardboard insulator. The terminal piece should be black or silver and located on top of the silver cardboard insulation, with the batteries beneath the cardboard. Mark the silver cardboard insulator at the exact point where the wires pass through the silver cardboard insulation. Again, this will make it easier to reassemble.
6. Release the terminal piece from the silver cardboard insulation using needle-nose pliers. Take care not to let the terminal wires touch or cross during this process as you are at risk for electrical shock or even an explosion. Set the terminal piece aside along with the battery case screws and spring.
7. Note the exposed metal band on the side of the battery pack. It is important to insulate this band with electrical tape prior to starting the process. This metal piece will be hot during the reconditioning process and insulating it with electrical tape will protect you from injury.
8. Remove the silver insulation piece that covers the top of the rechargeable battery cells. Place this piece aside to be used in reassembly.
9. Remove any plastic covering from the top section of the battery pack so you can access both the the top and bottom of the rechargeable battery leads.
10. Turn on the volt meter and set it to a reading of two volts. Check each individual battery cell and mark each battery cell that gives a reading of zero or negative. These will be the cells that will need to be reconditioned.
11. Prepare your external 12-volt power source, including alligator clamps, for the reconditioning process. Protect your hands, eyes and skin with protective clothing and safety gear during this potentially hazardous process.

12. Locate the positive and negative ends of the first battery to be reconditioned. The positive end will be raised and the negative ends will be flat.

13. From the 12-volt source, hold the black alligator clamp to the negative end of the battery and the red alligator clamp to the positive end for two seconds.
14. Release the clamps and use a battery test to see if the battery has been fully charged. Repeat the process if necessary. The rechargeable battery cell can be zapped up to 10 times. Continue reconditioning the remaining batteries.
15. Reassemble the battery pack.

About the Author

We have over 10,000 model specific batteries and chargers in UK. With our great selection you are sure to find what you need, such as laptop battery, cordless drill battery, canon camera battery, camcorder battery, ect. As the biggest retailer of batteries and battery chargers in UK, we help our clients save money by offering high quality products with low price. Our advantages are High quality, Bottom price, Fast shipping, Perfect service, 1 year warranty, 30 days money back.

7Pc. Hose Pliers Assortment $150.95 Kit SET INCLUDES: Hose Clamp Pliers (Astro Model # 9409) ? Allows for extra reach, removal and locking of clamps into open position ? Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16'' - 2-1/2'' (18mm-54mm) ? Precision clamp on end of flexible cable allows for extended reach where other models cannot reach ? Pliers can be locked, freeing up your hands and making your job easier and faster ? Rubber dipped handle ? Pliers have a lifetime warranty ? Cable and spring are wearable items and must be replaced. ? US Patent # 6,370,985 B1; France Patent # 0012910 Swivel Jaw Hose Clamp Pliers (?+? Slot) (Astro Model # 9406B) Swivel Jaw Hose Clamp Pliers (Astro Model # 9406C) ? Swivel jaws are slotted for positive holding of large or small clamps at any angle ? Ratchet action holds jaws closed in 5 different positions ? Fits all automotive and appliance spring wire hose clamps ? Allows fast and easy clamp removal ? Pliers latch in position to securely hold hose clamp when expanded ? Rubber dipped handle Angled Flat Band Hose Clamp Pliers (Astro Model # 9406D) ? Designed to remove and install flat band hose clamps in hard to reach areas ? Pliers feature angled jaws with 360? rotating tips to grip clamps at any angle ? Locking latch securely holds clamp in position ? Rubber dipped handle Hose Remover Pliers (Astro Model # 9406E) ? Designed to allow easy removal of 5/32? to ? vacuum and fuel hoses ? Rubber dipped handle Clic-R Collar Pliers (Astro Model # 9406F) ? For releasing and re-fitting reusable hose clips ? For type Clic and Clic-R Flat Band Hose Clamp Pliers (Astro Model # 9406G) ? Removes and Installs new style flat band hose clamps ? Jaws rotate 360? to grip at any angle ? Rubber dipped handleBy Astro Pneumatic.

Auto Clamp Pliers $23.95 Baron Custom Accessories Auto Clamp Pliers Just open the jaws and squeeze Auto-Adjusting pliers adjust from 0- to 1-3/8” Auto piston opens jaws when you release hand pressure These pliers are truly a “one-hand” operation Lifetime Limited Warranty

Schley Adjustable Straight Hose Clamp Pliers. Each $49.05 Manufacturer: Schley Products, Inc. Each. 95600 Hose Clamp Pliers Adjustable Straight Customers also search for: Discount Adjustable Straight Hose Clamp Pliers, Buy Adjustable Straight Hose Clamp Pliers, Wholesale Adjustable Straight Hose Clamp Pliers, To

Channellock Hose Clamp Pliers, 8. Each $17.63 Manufacturer: Channellock. Each. PermaLock® Fastener, eliminates nut and bolt failure Customers also search for: Discount Hose Clamp Pliers, 8", Buy Hose Clamp Pliers, 8", Wholesale Hose Clamp Pliers, 8", 025582520173, 558-BULK, Slip Joint Pliers

Lock Technology LTILT998 Hose Clamp Removal Pliers $33.74 Hose Clamp Pliers reach around the hose to encapsulate clamp compressing tips. These pliers allow the mechanic to easily rotate the clamp to a position where he can easily remove it. Length: 10. Width: 6. Height: 4.

Astro Pneumatic 7pc. Hose Pliers Assortment $133.61 Kit SET INCLUDES: Hose Clamp Pliers (Astro Model 9409) Allows for extra reach, removal and locking of clamps into open position Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16 inch - 2-1/2 inch (18mm-54mm) Precision clamp on end of flexible cable allows for extended reach where other models cannot reach Pliers can be locked, freeing up your hands and making your job easier and faster Rubber dipped handle Pliers have a lifetime warranty Cable and spring are wearable items and must be replaced. US Patent 6,370,985 B1; France Patent 0012910 Swivel Jaw Hose Clamp Pliers ( Slot) (Astro Model 9406B) Swivel Jaw Hose Clamp Pliers (Astro Model 9406C) Swivel jaws are slotted for positive holding of large or small clamps at any angle Ratchet action holds jaws closed in 5 different positions Fits all automotive and appliance spring wire hose clamps Allows fast and easy clamp removal Pliers latch in position to securely hold hose clamp when expanded Rubber dipped handle Angled Flat Band Hose Clamp Pliers (Astro Model 9406D) Designed to remove and install flat band hose clamps in hard to reach areas Pliers feature angled jaws with 360 rotating tips to grip clamps at any angle Locking latch securely holds clamp in position Rubber dipped handle Hose Remover Pliers (Astro Model 9406E) Designed to allow easy removal of 5/32 inch to vacuum and fuel hoses Rubber dipped handle Clic-R Collar Pliers (Astro Model 9406F) For releasing and re-fitting reusable hose clips For type Clic and Clic-R Flat Band Hose Clamp Pliers (Astro Model 9406G) Removes and Installs new style flat band hose clamps Jaws rotate 360 to grip at any angle Rubber dipped handle

Schley Adjustable 90 Degree Hose Clamp Pliers. Each $49.05 Manufacturer: Schley Products, Inc. Each. 95640 Hose Clamp Pliers Adjustable 90 Degree Customers also search for: Discount Adjustable 90 Degree Hose Clamp Pliers, Buy Adjustable 90 Degree Hose Clamp Pliers, Wholesale Adjustable 90 Degree Hose Clamp Pliers

Astro 9406 7 Piece Hose Pliers Assortment $167.56 Allows for extra reach removal and locking of clamps into open position Allows for removal of plastic and/or metal selftightening hose clamps with diameters of 11/16 21/2 (18mm54mm) Precision clamp on end of flexible cable allows for extended reach where other models cannot reach Pliers can be locked freeing up your hands and making your job easier and faster Rubber dipped handle Pliers have a lifetime warranty Cable and spring are wearable items and must be replaced. Swivel jaws are slotted for positive holding of large or small clamps at any angle Ratchet action holds jaws closed in 5 different positions Fits all automotive and appliance spring wire hose clamps Allows fast and easy clamp removal Pliers latch in position to securely hold hose clamp when expanded Rubber dipped handle Angled Flat Band Hose Clamp Pliers Designed to remove and install flat band hose clamps in hard to reach areas Pliers feature angled jaws with 360 degrees rotating tips to grip clamps at any angle Locking latch securely holds clamp in position Rubber dipped handle Hose Remover Pliers Designed to allow easy removal of 5/32 to vacuum and fuel hoses Rubber dipped handle ClicR Collar Pliers For releasing and refitting reusable hose clips For type Clic and ClicR Flat Band Hose Clamp Pliers Removes and Installs new style flat band hose clamps Jaws rotate 360 degrees to grip at any angle Rubber dipped handle

KD Tools Corbin Style Hose Clamp Pliers. Each $22.32 Manufacturer: KD Tools. Each. Lifetime warranty does not cover abuse Customers also search for: Discount Corbin Style Hose Clamp Pliers, Buy Corbin Style Hose Clamp Pliers, Wholesale Corbin Style Hose Clamp Pliers, 82171396096, KDS3975, Specialty Pliers

KD Tools KDT3976 Straight Hose Clamp Pliers $38.81 Straight Hose Clamp Pliers. Dimension: 7 x 3 x 0.5 . Huge selection to choose from. High quality components. Satisfaction ensured.

Spring Loaded Cable Hose Clamp Pliers $96.95 ? These pliers are used for removing metal or plastic self-tightening hose clamps with diameters from 11/16? to 2 ?? (18mm to 54mm). ? Flexibility of the pliers enables the user to reach, remove & lock clamps into open position. ? Flexible cable with a precision machined clamp at the end to reach where other pliers cannot. ? Locking mechanism on the pliers allows the user to set the hose clamp plier and work with both hands. By Mayhew Tools.

Schley Adjustable 45 Degree Hose Clamp Pliers. Each $49.05 Manufacturer: Schley Products, Inc. Each. 95620 Hose Clamp Pliers Adjustable 45 Degrees Customers also search for: Discount Adjustable 45 Degree Hose Clamp Pliers, Buy Adjustable 45 Degree Hose Clamp Pliers, Wholesale Adjustable 45 Degree Hose Clamp Plier

Stinger Hose Clamp Pliers Set - 2 Pc. $31.95 ? Includes a cross-slotted jaw pliers and a wide, flat-band hose clamp pliers. Services most ring-type or flat-band hose clamps. ? The clamps are held open with a ratchet locking mechanism. Jaws swivel to access hose clamps in any position.By OTC.

Mayhew Tools Spring Loaded Hose Clamp Pliers. Each $76.59 Manufacturer: Mayhew Tools. Each. Features Benefits: This unique hose clamp pliers utilizes a flexible cable with a precision machined clamp at the end to reach where other pliers can t The flexibility of the pliers enables the user to reach, remove an

Astro Pneumatic AST9406 Hose Clamp Plier Set 7Pc $198.26 Features and Benefits: Set Includes:. Hose Clamp Pliers (AST9409). Allows for extra reach removal and locking of clamps into open position. Allows for removal of plastic and/or metal selftightening hose clamps with diameters of 11/16_ 21/2_ (18mm54mm). Precision clamp on end of flexible cable allows for extended reach where other models cannot reach. Pliers can be locked freeing up your hands and making your job easier faster. Rubber dipped handle. Pliers have a lifetime warranty. Cable and spring are wearable items and must be replaced. Flat Band Hose Clamp Pliers (AST9406G). Removes and installs new style flat band hose clamps. Jaws rotate 360 to grip at any angle. Rubber dipped handle. Angled Flat Band Hose Clamp Pliers (AST9406D). Designed to remove and install flat band hose clamps in hard to reach areas. Pliers feature angled jaws with 360 rotating tips to grip clamps at any angle. Locking latch securely holds clamp in position. Rubber dipped handle. Hose Remover Pliers (AST9406E). Designed to allow easy removal of 5/32_ to 1/2 vacuum and fuel hoses. Rubber dipped handle. Swivel Jaw Hose Clamp Pliers (o+_ Slot) (AST9406B) and Swivel Jaw Hose Clamp Pliers (AST9406C). Swivel jaws are slotted for positive holding of large or small clamps at any angle. Ratchet action holds jaws closed in 5 different positions. Fits all automotive and appliance spring wire hose clamps. Allows fast and easy clamp removal

Astro Pneumatic Flexible Hose Clamp Pliers $45.95 Allows for extra reach, removal and locking of clamps into open position Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16" - 2-1/2" (18mm-54mm) Precision clamp on end of flexible cable allows for extended reach where other models cannot reach Pliers can be locked, freeing up your hands and making your job easier and faster Pliers have a lifetime warranty Cable and spring are wearable items and must be replaced

Mayhew MAY45650 Cats Paw Hose Clamp Pliers $65.37 Features and Benefits Solid one piece construction Handles standard and space saver clamps up to 23/32 Locking device for control and comfort Uses standard Mayhew 28651 and 28654 replacement cable and sheath systems European madeNEW Cats Paw hose clamp pliers are used to remove and install all types of hose clamps. Pliers feature a solid one piece construction with a locking device for control and comfort.

Cv Boot Clamp Pliers $31.95 For all ear-type clamps including GM FWD outboard CV joints. Designed for use with a torque wrench, as required for stainless steel bands.By Lisle.

Cooper Hand Tools Crescent® - Locking C-Clamp Pliers $17.4 Easy-to-use locking C-clamp pliers. Cooper Hand Tools Crescent® - 11" LOCKING C-CLAMP CARDED. Locking pliers that are simpler to utilize than standard clamps. Comes with a maximum jaw opening of 4in. Nickel-plated finish makes tool rust and corrosion-resistant. Comes with swivel pads or regular tips.

OTC OTC4502 Stinger Hose Clamp Pliers Set 2 Pc $40.78 Includes a cross slotted jaw pliers and a wide flat band hose clamp pliers. Services most ringtype or flatband hose hose clamps. Clamps are held open with a ratchet locking mechanism. Jaws swivel to access hose clamps in any position. 2 Pieces Hose Clamp Plier Set.

Schley Products Inc SCH95600 Hose Clamp Pliers Adjustable Straight $72.63 Made from heat treated steel these unique pliers come with soft grip handles. These fully adjustable hose clamp pliers enables the professional technician to access release tension and remove most constant tension hose clamps no matter what their size. Comfortable hand grip W for easy one handed squeezing. Compact pliers come with deep slotted tips which hold the clamp firmly. Tips rotate a complete 360 degrees allowing for optimum positioning of the pliers to ease the removal of these hose clamps. Automotive applications for the use of constant tension hose clamps are numerous and require many different sizes of clamps to fullfill these needs. Adjustable Straight Hose Clamp Pliers.

Schley Products SCH95640 Adjustable 90 Degree Hose Clamp Pliers $69.94 Tools has developed a fully adjustable hose clamp pliers which enables the professional technician to access release tension and remove most constant tension hose clamps no matter what their size. These compact pliers come with deep slotted tips which hold the clamp firmly. These tips also rotate a complete 360 allowing for optimum positioning of the pliers to ease the removal of these hose clamps. Made from heat treated steel these unique pliers come with soft grip handles.

Mayhew Tools MAY28650 Spring Loaded Cable Hose Clamp Pliers $110.55 These pliers are used for removing metal or plastic selftightening hose clamps with diameters from 11/16 to 21/2 (18mm to 54mm). Flexibility of the pliers enables the user to reach remove amp; lock clamps into open position. Flexible cable with a precision machined clamp at the end to reach where other pliers cannot. Locking mechanism on the pliers allows the user to set the hose clamp plier and work with both hands.

Lisle Hub Lock Remover Pliers for Ford $57.95 Removes the hub lock on 4WD F-Series Super Duty Ford Pickups Pliers quickly and easily remove hub lock without damaging the hub lock cover Pliers come with vinyl pads on the jaw to help grip the hub lock and prevent scratching of the outer surface Fits: 1999-2007 F-Series 4WD Super Duty Pickups: F250, F350, F450 and F550

Schley Products SCH95600 Adjustable Straight Hose Clamp Pliers $63.6 Hose Clamp Pliers Adjustable Straight. Automotive applications for the use of constant tension hose clamps are numerous and require many different sizes of clamps to fulfill these needs. Schley Products/SP Tools has developed a fully adjustable hose clamp pliers which enables the professional technician to access release tension and remove most constant tension hose clamps no matter what their size. Until now there hasnt been a pair of pliers on the market that could be adjusted to accommodate large and small size hose clamps and provide at the same time a comfortable hand grip width for easy one hand squeezing. These compact pliers come with deep slotted tips which hold the clamp firmly. These tips also rotate a complete 360 allowing for optimum positioning of the pliers to ease the removal of these hose clamps. Made from heat treated steel these unique pliers come with soft grip handles.

K-D Flat Band Hose Clamp Pliers $27.95 ? Improved spring mechanisms is longer lasting and more durable? Thicker double dipped handle for greater comfort and strength? 25% thicker gauge steel for stronger force without bending? Pliers remove and install newer-style flat band clamps used on various hose assemblies? Use pliers on Ford, GM and some imports.

OTC 2 Piece Hose Clamp Pliers Set. 1 Set $25.06 Manufacturer: OTC. 1 Set. Features and Benefits: Includes a cross slotted jaw pliers and a wide, flat band hose clamp pliers Services most ring-type or flat-band hose clamps Clamps are held open with a ratchet locking mechanism Jaws swivel to access hos

Schley Products Inc SCH95640 Hose Clamp Pliers Adjustable 90 Degree $72.63 Schley Products/SP Tools has developed a fully adjustable hose clamp pliers which enables the professional technician to access release tension and remove most constant tension hose clamps no matter what their size. These compact pliers come with deep slotted tips which hold the clamp firmly. These tips also rotate a complete 360 allowing for optimum positioning of the pliers to ease the removal of these hose clamps. Made from heat treated steel these unique pliers come with soft grip handles. Length: 11.6 . Width: 5 . Height: 0.9 .

Astro Pneumatic AST9409A Hose Clamp Pliers $59.14 Features and Benefits:. Allows for extra reach removal and locking of clamps into open position. Allows for removal of plastic and/or metal selftightening hose clamps with diameters of 11/16 21/2 (18mm54mm). Precision clamp on end of flexible cable allows for extended reach where other models cannot reach. Pliers can be locked freeing up your hands and making your job easier and faster. Rubber dipped handle. Body of Pliers have a lifetime warranty. Cable and spring are wearable items and must be replaced. Other features include: double gear lock widened lock lever with two teeth to eliminate possibility of slippage deeper cut gears to insure proper alignment with lock lever and thicker wire and cable to enhance durability.

Mayhew Tools 2 Piece Hose Clamp Pliers Set. Each $137.78 Manufacturer: Mayhew Tools. Each. Features Benefits: The jaws of the new easy access hose clamp pliers have a hooking capability of 360 degrees A single gripper jaw helps prevent the hose clamp from releasing from the tool and causing injury to the end

Tool Aid TA19780 Hose Clamp Pinching Pliers Set $29.87 Use to clamp fuel injection brake vacuum and cooling systems hoses. Includes one each small medium and large Hose Clamp Pliers in high visibility yellow. Smooth rounded jaws prevent hose damage. Lightweight and nonmetallic. Locks

Extra Long Valve Stem Seal Removal Tool Remover Pliers $20.99 Description:Metal Seal Removal Tool removes valve stem seals on overhead camshaft engines.Valve Pliers reach down around the valve stem into the confined area of the seal to grip it for removal."Gripping" serration in the tip allow them to grasp both original equipment and aftermarket seals regardless of their configuration.Jaws are serrated for a secure grip on the seal.Extra Long Valve Remover neck designed to reach into confined area of the seal to grip it for removal.Gripping serration in the allow them to grasp both original equipment & aftermarket seals regardless of the configuration.Size: 25 x 4.6 x 1.8cmWeight: 381.2gPackage content:1 x Stem Seal Pliers

Lisle Adjustable Hose Clamp Pliers. Each $25.72 Manufacturer: Lisle. Each. Features Benefits: This tool removes and installs flat band hose clamps used on heater and radiator hoses Tips screw in and out to fit all clamp sizes Ratcheting lock mechanism holds the clamp in an open position for easy rem

Otc 4525 Extended Cable Hose Clamp Pliers $54.05 Allows technician to access the flattype hose clampslocated in hardtoreach areas.Pliers has locking mechanism to hold clamp in the openposition making removal and installation of clamp easier.Heavyduty 24 cable flexes to almost any position.Pliers is spring loaded to the open position.

Mayhew MAY28657 Easy Access Hose Clamp Pliers $120.14 Easy Access Hose Clamp Plier. Huge selection to choose from. High quality components. Satisfaction ensured. Length: 12.60 . Width: 4.40 . Height: 1.40 .

K-D Corbin Style Hose Clamp Pliers $25.95 ? Improved Strength? Easier to use locking feature? Dual dipped grip for comfort and force? For Corwin (wire) style hose clamps. The tips trap and hold clamp and swivel for multiple angle access

Astro Pneumatic 7 Piece Hose Clamp Pliers Set. Each $150.2 Manufacturer: Astro Pneumatic. Each. Features Benefits: Set Includes: Hose Clamp Pliers (AST9409) Allows for extra reach, removal and locking of clamps into open position Allows for removal of plastic and/or metal self-tightening hose clamps with diamet

Lisle CV Boot Clamp Pliers for Earless Type Clamps. Each $21.84 Manufacturer: Lisle. Each. Features Benefits: For earless-type clamps. A sturdy, low-cost tool. Works on earless-type clamps including those found on GM inboard CV joints. Skin-packed. Shipping wt. 12 oz. Constant Velocity (CV) Boot Clamp Pliers for ea

Lisle CV Boot Clamp Pliers for Ear Type Clamps. Each $26.32 Manufacturer: Lisle. Each. For all ear-type clamps including GM FWD outboard CV joints. Designed for use with a torque wrench, as required for stainless steel bands. Skin-packed. Shipping wt. 15 oz. Customers also search for: Discount CV Boot Clamp Pliers