Bolt Remover
Bolt Remover
![]() |
![]() CRAFTSMAN Boltout Plus Damaged Bolt Nut Remover 6pc Set US $32.99
|
![]() LIS19250 BOLT NUT STUD REMOVER SET US $40.64
|
![]() BOA Grabit screw and bolt remover set 2pc US $22.89
|
![]() Lisle 19250 BOLT NUT STUD REMOVER SET US $39.72
|
![]() Kent Moore J 42402 Connector Back Bolt Removers US $10.00
|
How to Remove Damaged Screws
Are you currently trying to fix or refurbish an old table in your home? If you are, then you may come across some really damaged screws that just won't come out easily. You may want to remove screws for many reasons. For example, you may wish to remove a wooden door from a cabinet so that you can repair it. Unfortunately, due to wear and tear, the head of the screw has either broken off or has rusted so terribly that an ordinary screw driver just won't work.
You may want to use special tools to help you remove those stubborn screws. Without the right tools, removing these damaged screws can waste a lot of time. The tools that you choose depends on the extent of damage on the screw heads. In general, there are two commonly known ways to remove damaged screws.
First, if the screw heads are slightly damaged, you may want to apply some Screwgrab. Screwgrab is a special type of substance with pieces of crushed diamonds in it. It is applied to the screw head. When dried, it gives more body to the screw head. The crushed diamond pieces also provide more friction. The idea is to build up the screw head a little bit more so that it can be removed by a screw driver.
However, for heavily damaged screw heads, Screwgrab will not work. The alternative is to use a screw extractor kit.
A screw extractor kit is a set of equipment made up of 2 simple devices.. It has a T shaped handle, where you can attach a screw extractor bolt. The screw extractor bolt comes in different sizes so that the right size can be used for different screws. The way it works is simple, but requires a little more work.
A pilot hole is needed on the head of the screw so that the screw extractor can attach itself to the screw head. That means some drilling may be involved. The screw extractor kit usually comes with a recommended size for the drill bit to use. So make sure that you use the right size. Otherwise, the screw extractor bolt won't fit into the hole.
Once the pilot hole is ready, the screw extractor is placed in a vertical position. Pressure is then applied on the T shaped handle and the handle is turned in a clockwise direction. As it turns clockwise, the extractor attaches itself to the hole in the screw head. The handle is then turned in an anti-clockwise direction to remove the screw.
You can also attach the bolt directly to a power drill for a more direct approach. Using the power drill, you can immediately attach the extractor bolt to the screw head with some drilling in the clockwise direction. Simply activate the drill in the counter clockwise direction to remove the screw. This way, you don't have to run into the risk of the extractor bolt not fitting into the pilot hole.
In sum, depending on the extent of damage to the screw heads, different tools and techniques can be applied. Try using Screwgrab first as it's more convenient and definitely much cleaner as it leaves no residue. If that doesn't work, use a power drill with a screw extractor bolt.
About the Author
For more information on screw removal, screw remover, and screw extractor, please visit our website.
|
|
Lisle Bolt Remover Set. Each $36.63 Manufacturer: Lisle. Each. Features Benefits: The 6 piece set removes standard and metric bolts, nuts and studs from 1/4" to 9/16" (6mm t 14mm). Drive the proper size remover over the bolt head, nut or stud. The remover spine cuts into the bolt head o |
|
|
Lisle LIS19250 Bolt Nut Stud Remover Set $53.94 19250Remover Set BoltFeatures and Benefits: The 6 piece set removes standard and metric bolts nuts and studs from 1/4 to 9/16 (6mm t 14mm). Drive the proper size remover over the bolt head nut or stud. The remover spine cuts into the bolt head or threads for sure grip. Then use a back and forth motion with a wrench or socket to free the fastener. Works well even on flush mounted bolts and nuts. Provides a no slip grip that withstands high torque. Made of super strong hardened tool steel for durability.Includes: 19250 Stuck bolt nut and stud remover set 19260 #1 remover. Fits 1/4 and 6mm 19270 #2 remover. Fits 5/16 and 8mm 19280 #3 remover. Fits 3/8 and 10mm 19290 #4 remover. Fits 7/16 and 11mm 19300 #5 remover. Fits 1/2 and 13mm 19310 #6 remover. Fits 9/16 and 14mm |
|
|
CTA Crankshaft Bolt Remover $105.95 Generates up to 600 ft. lbs. of force Services timing belts, crankshaft seals, harmonic balancers and bell housings Saves time when working on vehicles with limited crankshaft bolt access Bi-directional to both loosen and tighten bolts. Use with impact sockets Length: 24?/61cm |
|
|
5 Piece Damaged Screw Remover Broken Bolt Extractor Kit $9.99 Description:This Screw Extractor Kit makes removing broken screws, bolts and studs easy!These Damaged Screw Remover made from high grade heat treated steel, rust resistant.Easy to use with quick connect chucks and hand drills.Applications of these Broken Bolt Extractor are infinite! Automobiles, toys, furniture, appliances and more!They are easily from wood, metal or plastic and removes screws made of any alloy, including soft screws.5 Piece Bolt Remover Sizes: 1/8"-1/4", 1/4"-5/16", 5/16"-7/16", 7/16"-9/16", 9/16"-3/4".Weight: 125gPackage Contains:5 x Screw Extractors |
|
|
Lisle Corporation LS19250 Bolt Nut Stud Remover Set Ranges .25 in..56 in. $46.57 The 6 piece set removes standard and metric bolts nuts and studs from 1/4 to 9/16 (6mm to 14mm). Drive the proper size remover over the bolt head nut or stud. The remover spline cuts into the bolt head or threads for a sure grip. |
|
|
5 PCS Broken Bolt Screw Extractor Remover Set $9.99 Description:This Screw Extractor Set makes removing broken screws, bolts and studs easy!Bolt Remover made from high grade heat treated steel, rust resistant.Easy to use with quick connect chucks and hand drills.Applications of these Broken Bolt Extractor are infinite! Automobiles, toys, furniture, appliances and more!They are easily from wood, metal or plastic and removes screws made of any alloy, including soft screws.There are 5 piece Screw Extractor: 1/8", 1/4", 5/16", 7/16", 9/16".Weight: 118gPackage Contains5 x Screw Extractors |
|
|
CTA Ford 6.0L Head Bolt Remover $38.95 Use with 3/4? drive tools to transmit high torque needed to loosen and tighten head bolts Allows access to rear head bolts by eliminating the need to remove the cab from the chassis Prevents damage to rear heat shield and eliminates the need to remove the evaporator housing |
|
|
Bolt $23.99 Bolt |
|
|
Spot Remover $19.99 Spot Remover - T-Shirt |
|
|
Lisle Dodge Hub Remover Kit $35.95 Separates the frozen hub assembly from the steering knuckle on dodge vehicles Tool drives against loosened retaining bolts to separate assembly Prevents damage to the knuckle and complete hub assembly Tool drives on the bolt flange, so the head of the retaining bolt is not destroyed Kit Contains: 39300 for older, smaller applications 39250 for 2003 and newer 4-wheel drive 3/4 ton and 1 ton Dodge pickups |
|
|
Cinema Secrets WO002 Bloody Bolt $16.72 When only the best will do. Professional quality special fx make-up used in the film and theater industry. We give the easiest most realistic and the most disgusting looking bang for your buck. Let your imagination run wild with Cinema Secrets pre-painted Bloody Bolt latex prosthetic. Spirit gum adhesive spirit gum remover and gel blood sold separately. Also available as an EZ Effects Kit. |
|
|
Remover by Dermablend, 6 oz $14.99 Remover by Dermablend, 6 oz |
|
|
Oil Makeup Remover $5.97 Features 1oz Oil Remover |
|
|
Mehron Makeup Remover $4.99 Mehron Makeup Remover |
|
|
Jason's Makeup Remover 75Pads $8.49 Jason's Makeup Remover 75Pads |
|
|
Scherl and Roth Rosin Remover $6.95 Scherl and Roth Rosin Remover |
|
|
California Gold Scratch Remover $6.99 California Gold Scratch Remover |
|
|
Remover,Gum And Wax $3.99 REMOVER,GUM AND WAX |
|
|
Remover,Stain,Hyperox,Cr $5.99 REMOVER,STAIN,HYPEROX,CR |
|
|
Remover,Carpet,Stain,18oz $76.99 REMOVER,CARPET,STAIN,18OZ |
|
|
Remover,Paint/Graffiti,We $5.99 REMOVER,PAINT/GRAFFTI,WHT |
|
|
Cleaner,Spot Remover,Wht $3.99 CLEANER,SPOT REMOVER,WHT |
|
|
Cleaner,Vandalism,Remover $5.99 CLEANER,VANDALISM,REMOVER |
|
|
Remover,Markr,Rejuvenex $3.99 REMOVER,MARKR,REJUVENEX |
|
|
REMOVER,ODOR ELIMINATOR $7.99 REMOVER,ODOR ELIMINATOR |
|
|
Irwin Irwin 5pc Bolt Extractor 394001 $28.12 5pc bolt extractor 5-piece bolt-grip set Removes rounded off, painted over, damaged and rusted over nuts, and bolts Set includes 3/8?, 7/16?/11mm, 1/2?, 9/16?/14mm, and 5/8?/16mm Can be used on a 3/8? ratchet, impact wrench, or air ratchet Base of socket is hex to allow use of flat wrenches, box wrenches, adjustable wrenches, or locking pliers Fits both metric and standard sized nuts and bolts 6T of high-carbon steel-grip tight to remove the nut or bolt Storage case Brand #: Irwin 394001 UPC: 024721012579 Keywords: bolt extractor set 5pc grip nut remover |
|
|
Cool Gel Hair Remover $8.23 Cool Gel Hair Remover by Nair for Women - 7.5 oz Hair Remover |
|
|
Body Cream Hair Remover $6.99 Body Cream Hair Remover by Nair for Men - 8 oz Hair Remover |
|
|
Remove Eye Makeup Remover $42.56 Remove Eye Makeup Remover by Aesop for Unisex - 3.21 oz Makeup Remover |


US $16.59



























































































