Bench Vise

Bench Vise

Look Out For These Elements When Getting A New Woodworking Bench

When it comes to tackling construction and woodworking projects there is nothing more useful that you'll need than a woodworking bench. They are designed to help and aide the construction worker in preparing, assembling, and completing projects from start to finish. If you've ever thought about investing in such a bench then you can build your own or buy one from a hardware shop or specialty store.

Whatever your choice, though, there are a few elements that make all the difference when working on projects. So here are some things to keep in mind if you're either comparatively shopping for a bench or building your own.

Woodworking Vises.

The first and perhaps most important element are the vises that come attached to the bench or table. A vise is essentially a mechanical screw or holding apparatus that is designed to help keep your construction pieces in place while working. Basically, a vise clamps down on the wood pieces and holds them in place. Once in place, you can work on your wood piece without it flying all over the place. No matter if you're building your own or are buying one from a retail hardware store, make sure that your bench or table is equipped with these vises.

Sturdy Base.

It's not going to be too pleasant if you're working with a saw or some other potentially dangerous woodworking tools and the legs of your bench give out. Therefore do make sure that the quality of your woodwork bench is good, which means in particular that your bench needs to be sturdy - not just the legs, but also the frame and top. A good bench should be holding at least a few hundred pounds so that you'll be assured it won't crumble or crack under pressure. That being said, a woodworking bench should not only have a sturdy base and legs but should also be large enough in dimensions to accommodate huge pieces of wood.

Storage.

Another important element, that you'll be very grateful for, is storage to hold all your tools, equipment, and hardware. In addition, it's also good to have extra storage to place scrap pieces of wood or partially-finished projects so that you can come back to finish them later. Benches come with all sorts of storage possibilities and of course, the more storage, the better. As a minimum, make sure that you have at least one underneath shelf available.

All three of these components - the woodworking vises, any storage and the base - come together to make a fantastic woodworking bench that can be used for years to come.

About the Author

To get hold of Jim Holz's FREE Woodwork Course, that even includes a plan for making your own woodworking bench visit
http://www.WoodworkCourse.com

Wilton 11106 Wilton Bench Vise, Jaw Width 6-in, Jaw Opening 6-in $109.99 Wilton Bench Vise - 11106

The Vise $6.99 The Vise

Ridgid 63241140 Bench Chain Vise Jaw $196.09 Chain Screw. Friction Ring. Ring. Screw. Unit Sold is in measure of 1 Package. Bench Chain Vise Replacement Parts d92 bc810 vise jaw.

Wilton 10107 600N Machinists' Bench Vise - Stationary Base, 6-in Jaw Width, 10-in Jaw Opening, 5-1/2-in Throat Depth $1349 600N, Machinists' Bench Vise - 10107

Wilton 10096 500N, Machinists' Bench Vise - Stationary Base, 5-in Jaw Width, 8-in Jaw Opening, 4-1/4-in Throat Depth $999 500N, Machinists' Bench Vise - 10096

Wilton 10076 400N, Machinists' Bench Vise - Stationary Base, 4-in Jaw Width, 6-1/2-in Jaw Opening, 3-1/2-in Throat Depth $629 400N, Machinists' Bench Vise - 10076

Wilton 10016 400S, Machinists' Bench Vise - Swivel Base, 4-in Jaw Width, 6-1/2-in Jaw Opening, 3-1/2-in Throat Depth $699 400S, Machinists' Bench Vise - 10016

Wilton 10021 450S, Machinists' Bench Vise - Swivel Base, 4-1/2-in Jaw Width, 7-1/2-in Jaw Opening, 4-in Throat Depth $799 450S, Machinists' Bench Vise - 10021

Wilton 10026 500S, Machinists' Bench Vise - Swivel Base, 5-in Jaw Width, 8-in Jaw Opening, 4-1/4-in Throat Depth $1149 500S, Machinists' Bench Vise - 10026

Wilton 10116 800N, Machinists' Bench Vise - Stationary Base, 8-in Jaw Width, 12-in Jaw Opening, 5-13/16-in Throat Depth $3799 800N, Machinists' Bench Vise - 10116

Wilton 10036 800S, Machinists' Bench Vise - Swivel Base, 8-in Jaw Width, 12-in Jaw Opening, 5-13/16-in Throat Depth $3799 800S, Machinists' Bench Vise - 10036

Ridgid 63240080 Bench Yoke Vise $255.15 Yoke and base made of strong dependable iron: Hardened alloy steel jaws and convenient pipe rest and bender. Pipe Capacity: 1/8 [Min] 2 . Jaw Material:Alloy Steel. Material: Cast Iron. Type: Bench Yoke Vise.

Ridgid 63240090 Bench Yoke Vise $371 Yoke and base made of strong dependable iron: Hardened alloy steel jaws and convenient pipe rest and bender. Pipe Capacity: 1/ [Min] 3 . Jaw Material:Alloy Steel. Material: Cast Iron. Type: Bench Yoke Vise.

Ridgid 63240100 Bench Yoke Vise $431.66 Yoke and base made of strong dependable iron: Hardened alloy steel jaws and convenient pipe rest and bender. Pipe Capacity: 1/8 [Min] 4 . Jaw Material: Alloy Steel. Material: Cast Iron. Type: Bench Yoke Vise.

Ridgid 63240110 Bench Yoke Vise $982.94 Yoke and base made of strong dependable iron: Hardened alloy steel jaws and convenient pipe rest and bender. Pipe Capacity: 1/8 [Min] 6 . Jaw Material: Alloy Steel. Material: Cast Iron. Type: Bench Yoke Vise.

Olympia Tool 5in. Bench Vise 38605 $61.6 Bench vise. Hardened steel replaceable jaw faces. Permanent pipe jaws. 270deg; swivel base. Heavily reinforced 4 lug base. Powder coated finish. 5 . Length: 11.5. Width: 5.75. Height: 6.75

Olympia Tool 4in. Bench Vise 38604 $41.65 Bench vise. Hardened steel replaceable jaws. Permanent pipe jaws. 270deg; swivel base. Heavily reinforced 4 lug base. Powder coated finish. 4 . Length: 10. Width: 5. Height: 5.5

Olympia Tool 6in. Bench Vise 38606 $91.06 Bench vise. Hardened steel replaceable jaw faces. Permanent pipe jaws. 270deg; swivel base. Heavily reinforced 4 lug base. Powder coated finish. 6 . Length: 7.5. Width: 15. Height: 8.75

Wilton 10405 205M3, Combination Pipe and Bench Vise - Swivel Base, 5-1/2-in Jaw Width, 6-in Jaw Opening, 6-1/4-in Throat Depth $839.99 205M3, Combination Pipe and Bench Vise - 10405

Wilton 10225 C-1, Combination Pipe and Bench Vise - Swivel Base, 4-1/2-in Jaw Width, 6-in Jaw Opening, 4-3/4-in Throat Depth $1049 C-1, Combination Pipe and Bench Vise - 10225

Wilton 10250 C-2, Combination Pipe and Bench Vise - Swivel Base, 5-in Jaw Width, 7-in Jaw Opening, 5-5/16-in Throat Depth $1399 C-2, Combination Pipe and Bench Vise - 10250