Bearing Puller

Bearing Puller

Durasolid Carrier Bearing Puller – A Boon For Differential Installers

DURASOLID differential carrier bearing puller is a specialty tool that every automotive differential installer must have. The original as well as other branded differential bearings are quite expensive and often in short supply. Saving the same for reuse becomes quite important to save some money in these bad times.

Differential installers often face situations where after having set up the gears and replacing bearings they find that the shims under carrier bearings need to be changed to adjust the backlash. The conventional tools would end up in damaging the bearings or the seal surface and to save the same you have no choice but to live with the problem.

Now the installers don't need to compromise or be afraid of damaging the carrier bearing if they own a Durasolid carrier bearing puller kit as the clamshell design won't let the bearings damage while pulling them out and also save your expensive differential locker or carrier from damaging.

There were times when these differential carrier bearing pullers used to be very expensive and thus unaffordable and the automotive differential installers had no choice but to use the conventional tools or at the most commercial bearing pullers to pull the bearings from differential carriers, air lockers or pinions and end up spending too much of their expensive time and also damaging the carrier bearings or the seal surface in case of air lockers. Differential Installers who could not afford to buy the Clam shell design bearing pullers used to get it on rent as high as $100.

DURASOLID upon realizing this fact launched their clamshell design bearing puller in the range of $200.

DURASOLID carrier bearing puller further comes in two versions :

DBP DFF001 works on most standard size carrier bearing bearings / pinion bearings on differentials up to & including Dana 70, Dana 70 HD and Ford 10.25".

DBP DFF002 is to save money for those who do not work on Dana 70 HD, DANA 80 and FORD 10.25

The parts of the bearing puller that undergo heavy loads or wear and tear are made from alloy steel and heat treated to give a very long life. Majority of the parts are powder coated for good aesthetics and corrosion resistance. A sleek stand takes care of proper storage of all parts of this bearing puller.

Most of the light duty differential carriers do not have access or relief cut under the seating face of the bearing cone or the relief cut is too small and conventional bearing pullers mostly end up damaging the bearing and sometimes even the differential carrier / Air Locker ground face or the seal housing. The improved clamshell design of this bearing puller easily pulls out the carrier bearings from most of the light duty differential carriers and does not let the differential bearings damage.

While you enjoy this special tool at special price, DURASOLID is committed to bring to you an affordable range of differential service / installation equipments in days to come and make your work easy.

About the Author

Founded in 2008 Durasolid expertise in supplying various Differential Auto Parts like differential full spools, Differential mini spools, spindles, front Axle shafts, rear axle shafts, pinion yokes, differential carriers pullers, carrier bearing pullers

G2 Clamshell Bearing Puller for Jeep $380.94 G2 Professional Clamshell Bearing Puller; Small, Medium and large Clamshell; Adjustable Pilot; Spacer Sleeve; Handy Carrying and Storage Tray G2 Clamshell Bearing Puller for Jeep

Proto Puller Set Separ Bearing. 1 Set $43.02 Manufacturer: Proto. 1 Set. Spreading Cap. = 2 13/32 in [Max] Applications = Gear Type = Bearing Separator Puller Wt. = 1.48 lb Customers also search for: Discount Puller Set Separ Bearing, Buy Puller Set Separ Bearing, Wholesale Puller Set Separ Bearin

Rear Axle Bearing Puller Kit $41.95 ? Three pullers designed to make the removal of semi-floating rear axle bearings easier on most domestic cars. ? Includes: 1 in. x 1-7/8 in. Puller, 1-5/16 in. x 2-2/8 in. Puller, 1-3/8 in. x 2-7/8 in. Puller. ? Packaged in a blow molded case with laminated instruction cards or stickers integrated into case design for handy reference of application information. ? Removeable hinged style lid allows for convenient storage in tool box drawers. ? Individual part numbers molded into case for easy reference. Applications: 1 in. x 1-7/8 in. Puller - fits minimum bearing tube I.D. of 1 in. and maximum axle tube I.D. of 1-7/8 in. 1-5/16 in. x 2-3/8 in. Puller - fits minimum bearing tube I.D. of 1-5/16 in. and maximum axle tube I.D. of 2-3/8 in. 1-3/8 in. x 2-7/8 in. Puller - fits minimum bearing tube I.D. of 1-3/8 in. and maximum axle tube I.D. of 2-7/8 in. By K-D Tools.

Stinger Bar Puller/Bearing Separator $116.95 This combination set includes our two most popular bearing ?splitters? (2'' and 3''), four sets of hex push-puller legs and a bar-type puller head with a 9/16'' forcing screw. Separator tools are used with bar puller and legs for a wide variety of pulling jobs. ? The 5'' puller cross-bar with a 6-1/4'' forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools. ? A blow-molded plastic storage case keeps set contents organized and protected from loss.By OTC.

Internal Bearing Puller $27.95 ? When working space is limited, this type of puller is needed to remove flywheel pilot bearings from automobiles, trucks and tractors. ? Only 7-1/2'' (190mm) long. Can also be used to pull bearings or bushings from generators and starters. ? Includes 1/2'' to 1-1/4'' (13 to 32mm) I.D. capacity jaws.By CalVan Tools.

OTC Rear Axle Bearing Puller. Each $43.47 Manufacturer: OTC. Each. Features and Benefits: Fits minimum bearing tube I.D. of 1" and maximum axle tube I.D. of 1-7/8" Customers also search for: Discount OTC Rear Axle Bearing Puller, Buy OTC Rear Axle Bearing Puller, Wholesale OTC Rear Axle Bearing

KD Tools Seal & Pilot Bearing Puller. Each $66.31 Manufacturer: KD Tools. Each. 2824 Puller Seal Pilot Bearing Customers also search for: Discount Seal & Pilot Bearing Puller, Buy Seal & Pilot Bearing Puller, Wholesale Seal & Pilot Bearing Puller, 082171028243, ToolWeb, Engine Seal Tools

Proto Puller Pilot Bearing. Each $69.07 Manufacturer: Proto. Each. Removes bearings and bushings from starters, generators, magnetos and small electric motors No. of Arms = 2 Spreading Cap. = 1/2 in [Min], 1 1/2 in [Max] Type = Pilot Bearing Puller Wt. = 2.30 lb Customers also search for: Dis

OTC OTC7319 Pilot Bearing Puller $151.11 Features and Benefits: No. 7319 Pilot bearing puller. Capacity: 7/8 to 2 . I. D. reach: 1 . Weight: 3 lb. 8 oz.Designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used. Operates on many models with engine in chassis.

OTC 6540 Rear Axle Bearing Puller Set $213.58 OTC rear axle bearing service sets are designed to remove axle bearings from rear semifloating differentials. The kits work with any 5/818 in. threaded slide hammers. Small puller that fits 1 in. to 1 7/8 in. bearing tubes Medium puller that fits 1 5/16 in. to 2 3/8 in. bearing tubes Large puller that fits 1 3/8 in. to 2 7/8 in. bearing tubes Storage case

KD Tools KDT2824 Seal Pilot Bearing Puller $95.16 Puller Seal and Pilot Bearing. Dimensions: 0.2 H x 5.1 W x 14.5 D. Manufactured to the highest quality available. Satisfaction ensured.

Mountain Pilot Bearing Puller. Each $19.48 Manufacturer: Mountain. Each. Features Benefits: When working space is limited, this type of puller is needed to remove flywheel pilot bearings from automobiles, trucks, and tractors Only 7 1/2" long Can also be used to pull bearings or bushings from ge

OTC 7 Ton Bar-Type Puller/Bearing Splitter Set $161.95 ? Now service and maintenance professionals have a Puller/Bearing set for tough jobs,up to 7-tons, larger applications, and greater reach 8'' to 16''? As a stand alone puller/bearing splitter set or as a compliment to the 4518 version,the 4517 7-Ton Puller/Bearing Separator Set gives your maintenance/service shop the expanded capability to keep more business in house? Includes:- Bearing Splitter with 4'' capacity- Two sets of hex push puller legs- 8'' bar type puller head mated with a custom thread forcing screw

Mountain MTN9001 Pilot Bearing Puller $33.79 Features and Benefits:When working space is limited this type of puller is needed to remove flywheel pilot bearings from automobiles trucks and tractorsOnly 7 1/2 longCan also be used to pull bearings or bushings from generators or startersIncludes 1/2 to 1 1/4 ID Capacity jaws Strength helps pull out tough bearingsShort length allows reach into tighter areasVersatility works on automobiles trucks and tractorsMade in the U.S.A.Superceded: SKT92522

4059 - Puller Pilot Bearing $82.9 [577-4059] Truck Delivery UPC: 662679471804

Multipurpose Bearing & Pulley Puller Set $232.95 For a wide range of pulling jobs, including: bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, and harmonic balancers. Set includes drop-forged components, which can be used in a variety of combinations. Contents of Set: ? 2 ? Forcing Screws (Live Center): 3/4''-16 x 6-11/16'' and 3/4''-16 x 5'' ? 2 ? Cross-bar Yokes: 3 pin-hole @ 3-1/4'' to 5-1/2'', 2 pin-hole @ 2-3/8'' to 3-3/8'' ? 2 ? Clamp Bolts ? 3 ? Pairs of Puller Jaws: 1-3/8'' Max, 1-5/8'' Max, 1-3/4'' Max ? 1 ? Pair of Jaw Pins with Ball Spring ? 3 ? Pairs of Capped Bolts Spread: 3'' to 5'', Reach: 1'' to 2-1/4'' Housed in a blow-molded plastic storage case. By OTC.

K-D Tools Rear Axle Bearing Puller Kit $36.69 Three pullers designed to make the removal of semi-floating rear axle bearings easier on most domestic cars. Includes: 1 in. X 1-7/8 in. Puller, 1-5/16 in. X 2-2/8 in. Puller, 1-3/8 in. X 2-7/8 in. Puller. Packaged in a blow molded case with laminated instruction cards or stickers integrated into case design for handy reference of application information. Removeable hinged style lid allows for convenient storage in tool box drawers. Individual part numbers molded into case for easy reference. Applications: 1 in. X 1-7/8 in. Puller - fits minimum bearing tube I. D. Of 1 in. And maximum axle tube I. D. Of 1-7/8 in. 1-5/16 in. X 2-3/8 in. Puller - fits minimum bearing tube I. D. Of 1-5/16 in. And maximum axle tube I. D. Of 2-3/8 in. 1-3/8 in. X 2-7/8 in. Puller - fits minimum bearing tube I. D. Of 1-3/8 in. And maximum axle tube I. D. Of 2-7/8 in.

KD Tools KDT41710 Rear Axle Bearing Puller Set $53.89 Features and Benefits:. Three pullers designed to make the removal of semifloating rear axle bearings easier on most domestic cars. Includes: 1 in. x 17/8 in. Puller 15/16 in. x 22/8 in. Puller 13/8 in. x 27/8 in. Puller. Packaged in a blow molded case with laminated instruction cards or stickers integrated into case design for handy reference of application information. Removable hinged style lid allows for convenient storage in tool box drawers . Individual part numbers molded into case for easy referenceApplications:. 1 in. x 17/8 in. Puller fits minimum bearing tube I.D. of 1 in. and maximum axle tube I.D. of 17/8 in.. 15/16 in. x 23/8 in. Puller fits minimum bearing tube I.D. of 15/16 in. and maximum axle tube I.D. of 23/8 in.. 13/8 in. x 27/8 in. Puller fits minimum bearing tube I.D. of 13/8 in. and maximum axle tube I.D. of 27/8 in.

10 Ton Push-Puller $162.95 Can be used with OTC 1123 bearing puller attachment, 679 pulley pulling attachment, 1150, 1151, 1152, 1153 internal pulling attachmentsBy OTC.

OTC OTC4518 5 Ton BarType Puller/Bearing Splitter Set $156.34 This combination set includes our two most popular bearing splitters (2 and 3 ) four sets of hex pushpuller legs and a bartype puller head with a 9/16 forcing screw. Separator tools are used with bar puller and legs for a wide variety of pulling jobs. The 5 puller crossbar with a 61/4 forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools. A blowmolded plastic storage case keeps set contents organized and protected from loss.

Rear Axle Bearing Puller Set by OTC $89.95 Each of the pullers included in this set make short work removing semi-floating rear axle bearings. The 3-piece set services most domestic cars. Works with OTC puller-type slide hammers. Weight: 2 lbs. 3 oz. in plastic carrying case. By OTC. Included sizes (Fit main bearing tube I.D.) 1'' to 1-7/8'', 1-5/16''-2-3/8'', 1-3/8''-2-7/8''

Proto 5774331 Puller Set Separ Bearing $61.33 Professionals worldwide prefer Proto Industrial Tools for their outstanding quality durability and dependability. Professionals for heavyduty industrial applications including automanufacturing plants steel and airplane manufacturing chemical plants refineries general manufacturing transportation and fleet maintenance for trucking transit and aircraft use Proto Industrial Tools. With a global distribution network Proto Industrial Tools are available onthejob anywhere in the world. Puller Set Separ Bearing. Spreading Cap.: 213/32 in [Max]. Applications: Gear.

NCT5656 Inner Cam Bearing Puller $90.37 This tool was designed to remove the inner cam bearing on single cam engines. Works for 1986 to present Single Cam models. Black Oxidized finish. Made in U.S.A. Dimension: 3.25 W x 7.75 L x 2.25 H.

OTC OTC4534 Multipurpose Bearing and Pulley Puller Set $257.93 Features and Benefits: 2 Forcing Screws (Live Center): 3/4 16 x 611/16 and 3/4 16 x 5 2 Crossbar Yokes: 3 pinhole at 31/4 to 51/2 2 pinhole at 23/8 to 33/8 2 Clamp Bolts 3 Pairs of Puller Jaws: 13/8 Max 15/8 Max 13/4 Max 1 Pair of Jaw Pins with Ball Spring 3 Pairs of Capped Bolts Spread: 3 to 5 Reach: 1 to 21/4 Housed in a blowmolded plastic storage caseThis multipurpose bearing and pulley puller set is for a wide range of pulling jobs including: bearings alternators generators power steering and crankshaft pulleys timing gears and harmonic balancers.This set includes dropforged components which can be used in a variety of combinations.

OTC OTC6540 8 Piece Rear Axle Bearing Puller Set $282.5 Features and Benefits:. Rear axle bearing puller fits min. bearing tube I.D. of 1 and max axle tube I.D. of 17/8 . Rear axle bearing puller fits min. bearing tube I.D. of 15/16 and max axle tube I.D. of 23/8 . Rear axle bearing puller fits min. tube I.D. of 13/8 and max axle tube I.D. of 27/8 . Slide hammer tee bar. Slide hammer weight: 5 lbs . Pulling hook . Rear axle pulling plate . Bearing cup removerThis 8 piece set contains slide hammer and popular attachments needed for servicing flange type floating rear axle bearing and seals in most late model rear wheel drive cars and light trucks. Also included is a molded case for storage.

OTC Flywheel Pilot Bearing Puller for 1-1/4 I.D.. Each $243.05 Manufacturer: OTC. Each. Features and Benefits: Make quick work of pulling stubborn, rusted pilot bearings The puller's forcing screw expands the jaws inside the bearing and simultaneously pushes against the crankshaft Customers also search for: Discou

OTC OTC7318 Pilot Bearing Puller 1/2 to 11/2 Inch $126.97 Features and Benefits: Operates on many models with engine in chassis Pilot bearing puller Weight: 3 lb. 7 oz.Designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used.

Pulley Puller And Installer Set $64.95 Remove pressed-on alternator and power steering pulleys on late-model GM, Ford and Chrysler engines. The threaded end installs late-model GM alternator and power steering pulleys, including Quad 4. Reverse the jaws to pull the alternator internal bearing. The puller fits some AMC's. Will not work on 3.3L and 3.5L Chrysler engines. Includes: Puller Body, Jaw and Sleeve Assembly, Jackscrew, Button, Bearing and Washer, Puller Pin for Quad 4, Screw Installer for Quad 4, Puller Pin for GM 3.1, Screw Installer for Ford 4.6 and Screw Installer for All Others.By K-D Tools.

Mastercool MSC90320 Universal Clutch Pulley Puller $108.72 Features and Benefits: Includes Rotor and bearing pilot Includes universal puller body Includes universal puller arbor Includes universal remover jawsThis universal clutch pulley puller is used to work on air conditioning compressor clutches.

Three-Jaw 3 Legs Gear Hub Bearing Puller Set $30.99 Descriptions:3-Legs Gear Puller Set100mm (4") three jawHeat Treated And Precision MachinedChrome Plated

OTC OT1183 Bearing Puller Set 5 Pieces $492.19 Bearing Splitter Combo Set This combo pack contains four bearing splitters plus a pulley pulling attachment. A rugged organizer case is included enabling you to keep the tools together for instant use. No. 1183 Bearing splitter combo set. Set No. 1183 consists of: 1121 Bearing splitter. Has 15/16 max. spread and 1/4 min. spread. 1122 Bearing splitter. Has 2 max. spread and 1/8 min. spread. 1123 Bearing splitter. Has 45/8 max. spread and 1/2 min. spread. 1130 Bearing splitter. Has 9 max. spread and 1/2 min. spread. 679 Pulley pulling attachment with a 57/8 max.and 13/4 min. spread.

Proto Puller Set Separator Bng. 1 Set $90.65 Manufacturer: Proto. 1 Set. Spreading Cap. = 4 3/8 in [Max] Applications = Gear Type = Bearing Separator Puller Wt. = 5.57 lb Customers also search for: Discount Puller Set Separator Bng, Buy Puller Set Separator Bng, Wholesale Puller Set Separator Bng,

OTC Rear Axle Bearing Puller Set - 3 Pc. $125.95 Each of the pullers included in this set make short work removing semi-floating rear axle bearings. The 3 piece set services most domestic cars. Works with OTC puller-type slide hammers.Included sizes (Fit main bearing tube I.D.)? 1'' to 1-7/8''? 1-5/16''-2-3/8''? 1-3/8''-2-7/8''

OTC Pilot Bearing Puller 1/2 to 1 1/2". Each $87.97 Manufacturer: OTC. Each. Features Benefits: Designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used. Operates on many models with engine in chassis. Pilot bearing puller. Weight: 3 lb., 7 oz. Customers also search

OTC Pilot Bearing Puller 7/8 to 2". Each $104.69 Manufacturer: OTC. Each. Features Benefits: Designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used. Operates on many models with engine in chassis. No. 7319 - Pilot bearing puller. Capacity: 7/8" to 2". I. D. rea

OTC OTC5048 Flywheel Pilot Bearing Puller for 1.25in. I.D. $320.59 This tool make quick work of pulling stubborn rusted pilot bearings. No. 5048 fits 11/4 I.D. bearings. The puller's forcing screw expands the jaws inside the bearing and simultaneously pushes against the crankshaft. Dimension: 5 W x 6.

KD Tools Rear Axle Bearing Puller Set. Each $36.58 Manufacturer: KD Tools. Each. Features and Benefits: Three pullers designed to make the removal of semi-floating rear axle bearings easier on most domestic cars Includes: 1 in. x 1-7/8 in. Puller, 1-5/16 in. x 2-2/8 in. Puller, 1-3/8 in. x 2-7/8 in. Pull

4275 - Puller Set Pilot Bearing $128.3 [577-4275] Truck Delivery UPC: 662679471415