Arm Puller

Arm Puller

How to Buy a Safe Stuffed Toy for Your Baby (and Have Peace of Mind)

Remember that episode in House where germ-laden stuffed toys were the cause of a series of baby sickness in the hospital?  Beware of the dangers of being cute.

But, fret not.  It's still OK to buy your favorite cuddly teddy bear or cutest stuffed penguin and be safe from harm.

 

1. Don't just go after looks. It may look the most adorable thing in the whole wide world, but don't just buy a stuffed toy because you like the way it'd look in your baby's arms or in your baby's room.

2. Inspect the toy, particularly the seams, the eyes, nose, and any other attached parts. Gently tug the parts to see if they will come off easily.  Remember, babies and kids are notorious tuggers and pullers.  A poorly-sewn stuffed toy might easily come apart.  Think of all that stuffing scattered all over the floor should that happen.  Not cute at all.

3. Check for wires. Yes, some toys have wires in them to help the parts keep their shape, such as ears or tails.  Wires like these can poke out of their casing and pose danger to your baby and kids.  So it's probably a good idea to just stick with the pure stuffed toys, with no wires at all.

4. Make sure it is washable, whether hand-wash or machine-wash.  The thick fur and down of stuffed toys are a veritable breeding ground for bacteria and germs, even those nasty dust mites.  Not to mention dried baby drool.  Everytime toddlers picks up their favorite stuffed animal, they're actually exposing themselves to a host of germs and microbes.

Which is why you'll want to buy a stuffed toy you can safely handwash, or better yet, just toss in the washing machine.  Some stuffed animals however are surface-wash-only, while others have electronics embedded in them, so check the manufacturer's warnings and recommendations on how to clean the stuffed toy.

How do you safely wash your kid's stuffed toy?

1. Place the toy inside an old pillowcase and knot it tightly.

2.Wash on gentlest cycle.

3. Rinse twice.

4. On the final rinse, you might like to add a cup of vinegar,to effectively get rid of all soap residue (Don't worry, it won't smell funny when it dries).

5. Air-dry, or much better, dry under the sun.

6. Use a gentle brush to restore the fluff.

 

Lastly, whatever you do, never buy used and pre-owned stuffed toys.  It may be a rare vintage Smurfs stuffed toy, or limited edition Raggedy Ann, or the last existing Dora the Explorer doll on earth, but resist the temptation.  Even if it's still in good condition, you have no idea where it previously came from or what it's been through.

At the end of the day, for  your child's safety, your best bet is to just buy a brand-new stuffed animal your child can create fresh lasting memories with.

About the Author

This article is written for Toyspedia.blogspot.com: The Blog about Online Toys for Kids and the Best Toys Online for the Kid in You.

Lisle Pitman Arm Puller $31.95 Heavy duty puller works on most cars and trucks. Designed to work on even the most stubborn Pitman arm pulling jobs. Position puller jaws over Pitman arm and turn center screw to free Pitman arm. Puller body is drop-forged and heat-treated for strength.

OTC Pitman Arm Puller. Each $38.07 Manufacturer: OTC. Each. Customers also search for: Discount Pitman Arm Puller, Buy Pitman Arm Puller, Wholesale Pitman Arm Puller, 731413038419, ToolWeb, Linkage Tools

Pitman Arm Puller $52.95 The No. 7314 Pitman arm puller is designed to handle the toughtest Pitman arm pulling jobs on passenger cars and light trucks. This puller features special forged jaws shaped to fit the job, ensuring a positive grip and leaving your hands free for the pulling job. To use, simply remove the retaining nut, place the puller jaws behind the Pitman arm and tighten the forcing screw. Mechanical power does the rest!By OTC.

Lisle Pitman Arm Puller. Each $28.73 Manufacturer: Lisle. Each. Features Benefits: Heavy duty puller works on most cars &trucks. Designed to work on even the most stubborn Pitman arm pulling jobs. Position puller jaws over Pitman arm and turn center screw to free Pitman arm. Puller body i

K Tool International Pitman Arm Puller. Each $25.7 Manufacturer: K Tool International. Each. Clam shell Customers also search for: Discount Pitman Arm Puller, Buy Pitman Arm Puller, Wholesale Pitman Arm Puller, 769622703651, ToolWeb, Linkage Tools

OTC OTC7314A Pitman Arm Puller $55.58 The No. 7314 Pitman arm puller is designed to handle the toughtest Pitman arm pulling jobs on passenger cars and light trucks. This puller features special forged jaws shaped to fit the job ensuring a positive grip and leaving your hands free for the pulling job. To use simply remove the retaining nut place the puller jaws behind the Pitman arm and tighten the forcing screw. Mechanical power does the rest

Pitman Arm Puller by Wilmar Tools $12.99 Opening size is 1-5/16 in.;Pull travel of 2-1/2 in.;3/8 in. drive square port center drive screw;Heavy-duty forged alloy steel yoke Pitman Arm Puller by Wilmar Tools

KD Tools Pitman Arm Puller. Each $31.38 Manufacturer: KD Tools. Each. Features Benefits: Puller removes full-size pitman arms Puller has a drop-forged and heat-treated steel yoke Screw size 5/8"-18 Thread Removing the pitman arm, KD Tools has made a simple way! With this pitman arm puller si

OTC OTC4676 Windshield Arm Puller $31.89 Features and Benefits:. Removes wiper arms on many foreign and domestic cars and light trucks. Will not damage wiper arm or hood cowling during removal. Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft.

Lisle LIS41900 1oz Pitman Arm Puller $44.95 41900Pitman Arm PullerFeatures and Benefits: Heavy duty puller works on most cars trucks. Designed to work on even the most stubborn Pitman arm pulling jobs. Position puller jaws over Pitman arm and turn center screw to free Pitman arm. Puller body is dropforged and heattreated for strength. Skinpacked. Shipping wt. 2 lbs. 1 oz.

KD Hand Tools 2289 Pitman Arm Puller $38.18 Pitman Arm Puller Puller removes fullsize pitman arms. To use mount jaws over pitman arm and turn center screw with wrench until tight. Strike center screw with hammer to release Pitman Arm. No Other tools are needed. Puller has a dropforged and heattreated steel yoke Screw size .625in 18 Thread

Lisle LS41970 Over Size Pitman Arm Puller $42.79 For 2005 and Later Ford F250 and F350. A heavyduty puller for the large Pitman arms on Ford 250 and 350 trucks. Jaws are forged and heattreated for strength. Position puller jaws under the Pitman arm turn center screw to remove. Width of opening Dimension: 1.75 inch

K-D Tools Pitman Arm Puller $33.25 Puller removes full-size Pitman arms. To use, mount jaws over Pitman arm and turn center screw with wrench until tight. Strike center screw with hammer to release Pitman arm. No other tools are needed. Puller has a drop-forged and heat-treated steel yoke. Screw size 5/8 inch-18 thread.

Pitman Arm Puller (Medium And Heavy Trucks) $145.95 Designed to handle the toughest Pitman arm pulling jobs. Theyre adjustable and have specially forged jaws shaped to fit the job. They have two clamp bolts that lock the jaws on the Pitman arm for pulling ensuring positive grip and leaving hands free for the pulling job. Puller will perform many other pulling jobs.By OTC.

Otc 6496 Pitman Arm Puller For Trucks $93.78 New patented design saves time increases productivity. Labor intensive removal of steering sector is now unnecessary. Compact design of puller allows easy access to the Pitman arm. Live center on forcing screw and easy use of a standard wrench results in less effort required. Works on most domestic SUVs and pickups.

KD Tools KD2289 5/8 18 Pitman Arm Puller $38.18 Puller removes fullsize Pitman arms. To use mount jaws over Pitman arm and turn center screw with wrench until tight. Strike center screw with hammer to release Pitman arm. No other tools are needed. Puller has a dropforged and heattreated steel yoke. Screw size 5/8 18 thread.

OTC OTC8149 Conical Pitman Arm Puller for Compact and Intermediate Cars $70.18 Features and Benefits Conical Pitman Arm Puller designed for strength Large 3/416 X 43/4 forcing screw for power Designed to fit pitman ares on smaller cars Larger forcing screw for more power and strength Designed to pull stubborn pitman armsConical Pitman Arm Puller designed for compact and intermediate cars. 3/416 X 43/4 forcing screw provides enough power to remove stubborn Pitman arms. Conical design allows the puller to fit securely on the pitman arm.

Windshield Wiper Puller $20.95 ? Removes wiper arms on many foreign and domestic cars and light trucks. ? Will not damage wiper arm or hood cowling during removal. ? Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft.By OTC.

OTC OTC6497 Super Duty Pitman Arm Puller $107.32 Features and Benefits Pitman arm can be removed while steering gear is on vehicle 31/4 spread handles the large pitman arms Robust desgn for durability and strength 2 clamp bolts lock the jaws for secure grip Works on 2005current Ford Super Duty trucks.Super Duty Pitman Arm Puller for 2005current Ford Super Duty trucks F250 F350 and F450.

OTC OTC8150 Conical Pitman Arm Puller Light Trucks $64.76 Features and Benefits Conical design for strength and secure fit 3/416 X 43/4 forcing screw for power Designed to fit Pitman arms on domestic cars and light trucks Large forcing screw for more power Designed to pull stubborn Pitman armsConical Puller Pitman arm puller designed to fit Pitman arms on domestic cars and light trucks. 3/416 X 43/4 forcing screw provides enough power to remove stubborn Pitman arms. Conical design allows the puller to fit securely on the pitman arm.

Lisle Battery Terminal and Wiper Arm Puller $28.95 Removes Battery Terminals and Bolted on Wiper Arms. A dual-purpose puller. Easily removes stuck battery terminals. Tighten knurled cone to force jaws under the cable clamp. Turn center screw to lift clamp off terminal. Also removes bolted on windshield wiper arms that fit over a tapered spline. The puller screw pad is designed to fit the top of the spline post for easy pulling.

Lisle LIS54150 Battery Terminal And Wiper Arm Puller $37.38 Removes Battery Terminals and Bolted on Wiper Arms. A dualpurpose puller. Easily removes stuck battery terminals. Tighten knurled cone to force jaws under the cable clamp. Turn center screw to lift clamp off terminal. Also removes bolted on windshield wiper arms that fit over a tapered spline. The puller screw pad is designed to fit the top of the spline post for easy pulling.

Lisle Battery Terminal and Wiper Arm Puller. Each $22.06 Manufacturer: Lisle. Each. Features and Benefits: Removes battery terminals and bolted on wiper arms A dual purpose puller Easily removes stuck battery terminals Tighten knurled cone to force jaws under the cable clamp. Turn center screw to lift clamp

Lisle LS54150 Battery And Wiper Arm Puller Tool $32.35 Removes Battery Terminals and Bolted on Wiper Arms. A dualpurpose puller. Easily removes stuck battery terminals. Tighten knurled cone to force jaws under the cable clamp. Turn center screw to lift clamp off terminal. Also removes bolted on windshield wi

OTC Conical Pitman Arm Puller $77.95 ? Tool is designed to fit Pitman arms on compact and intermediate cars? Conical design fits securely on Pitman arm? 3/4-16 x 4-3/4'' forcing screw provides enough power to remove stubborn Pitman arms

CTA Windshield Wiper Arm Puller $14.95 Removes wiper arms on all makes and models Works in tight spaces Will not damage wiper arm or paintwork Has a turning knob for fast work Forged body construction Better than using a prybar or screwdriver

Consew 4024-P Four Needle High Speed Cylinder Arm Double Chainstitch Machines Assembled with Motor and Puller $7499.99 Consew 4024-P Four Needle High Speed Cylinder Arm Double Chainstitch Machines Assembled with Motor and Puller

Consew 744R-10P Extra Heavy Duty, Single Needle, Long Arm Sewing Machine Assembled with Motor and Puller $8499.99 Consew 744R-10P Extra Heavy Duty, Single Needle, Long Arm Sewing Machine Assembled with Motor and Puller

Consew 744R-20P Extra Heavy Duty, Single Needle, Long Arm Sewing Machine Assembled with Motor and Puller $9999.99 Consew 744R-20P Extra Heavy Duty, Single Needle, Long Arm Sewing Machine Assembled with Motor and Puller

OTC Pitman Arm Puller fro Medium and Heavy Duty Trucks. Each $85.93 Manufacturer: OTC. Each. Features and Benefits: This puller is designed for the toughest Pitman arm jobs Adjustable and have rugged forged jaws shaped to fit the job Two clamp bolts lock the jaws on the Pitman arm ensuring a solid grip Includes an adapte

OTC OTC7310A Pitman Arm Puller Medium and Heavy Trucks $124.03 Designed to handle the toughest Pitman arm pulling jobs. Theyre adjustable and have specially forged jaws shaped to fit the job. They have two clamp bolts that lock the jaws on the Pitman arm for pulling ensuring positive grip and leaving hands free for the pulling job. Puller will perform many other pulling jobs.

Lisle LIS41970 1.5H x 5.75W x 10.5D Heavy Duty Pitman Arm Puller $49.65 Features and Benefits: For 2005 and later Ford F250 F350 Jaws are forged and heattreated Heavy duty puller for large pitman armsA heavyduty puller for the large Pitman arms on Ford 250 and 350 trucks. Jaws are forged and heattreated for strength. Position puller jaws under the Pitman arm turn center screw to remove.

Pitman Arm Puller - Compact Design For Suv $118.95 ? New patented design saves time, increases productivity. ? Labor intensive removal of steering sector is now unnecessary. ? Compact design of puller allows easy access to the Pitman arm. ? Live center on forcing screw and easy use of a standard wrench results in less effort required. ? Works on most domestic SUVs and pickups. ? Tool is forged steel for durability and long life. ? Pays for itself on its first job. Works on the following four-wheel-drive vehicles: 1998 ? 2002 Lincoln Navigator 1997 ? 2002 Ford F-150 and Expedition 1991 ? 2001 Oldsmobile Bravada 1991 ? 2001 S10/S15 GM Trucks and Blazers 1992 ? 2002 Suburban 1988 ? 2002 GM and Chevy 1/2-, 3/4- and 1-ton pickups 1992 ? 2002 Chevy Tahoe and GMC YukonBy OTC.

OTC OTC6496 Pitman Arm Puller for SUV $107.32 Features and Benefits: New patented design saves time increases productivity Labor intensive removal of steering sector is now unnecessary Compact design of puller allows easy access to the Pitman arm Live center on forcing screw and easy use of a standard wrench results in less effort required Works on most domestic SUV s and pickups Tool is forged steel for durability and long life Pays for itself on its first jobThis tool helps to cut removal time from 31/2 hours to 40 minutesWorks on the following fourwheeldrive vehicles: 1998 2002 Lincoln Navigator 1997 2002 Ford F150 and Expedition 1991 2001 Oldsmobile Bravada 1991 2001 S10/S15 GM Trucks and Blazers 1992 2002 Suburban 1988 2002 GM and Chevy 1/2 3/4 and 1ton pickups 1992 2002 Chevy Tahoe and GMC Yukon